From: "Tzschichholz, Frank" <flock.greenwater@gmx.de>
To: linux-hotplug@vger.kernel.org
Subject: usb-handy hotplug problem
Date: Wed, 18 Jan 2006 02:06:21 +0000 [thread overview]
Message-ID: <200601180306.21518.flock.greenwater@gmx.de> (raw)
Hi,
trying to hotplug a sony handy I observed a problem.
Perhaps someone of you has an idea or the prob is already fixed.
snip--
Jan 18 02:41:25 cartan kernel: usb 4-2: new full speed USB device using
address
2
Jan 18 02:41:31 cartan kernel: drivers/usb/class/cdc-acm.c: Ignoring extra
header
Jan 18 02:41:31 cartan kernel: cdc_acm 4-2:1.1: ttyACM0: USB ACM device
Jan 18 02:41:31 cartan kernel: drivers/usb/class/cdc-acm.c: Ignoring extra
header
Jan 18 02:41:31 cartan kernel: cdc_acm 4-2:1.3: ttyACM1: USB ACM device
Jan 18 02:41:31 cartan kernel: usbcore: registered new driver cdc_acm
Jan 18 02:41:31 cartan kernel: drivers/usb/class/cdc-acm.c: v0.23:USB Abstract
Control Model driver for USB modems and ISDN adapters
Jan 18 02:41:31 cartan kernel: Initializing USB Mass Storage driver...
Jan 18 02:41:31 cartan kernel: scsi2 : SCSI emulation for USB Mass Storage
devices
Jan 18 02:41:32 cartan kernel: Vendor: Sony Eri Model: Memory Stick
Rev: 0000
Jan 18 02:41:32 cartan kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jan 18 02:41:32 cartan kernel: SCSI device sdb: 1921024 512-byte hdwr sectors
(984 MB)
Jan 18 02:41:32 cartan kernel: sdb: Write Protect is off
Jan 18 02:41:32 cartan kernel: sdb: assuming drive cache: write through
Jan 18 02:41:38 cartan wait_for_sysfs[6190]: either wait_for_sysfs (udev 039)
needs an update to handle the device
'/devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.8/host2/2:0:0:0' properly
(no bus device link) or the sysfs-support of your
device's driver needs to be fixed, please report to
<linux-hotplug-devel@lists.sourceforge.net>
Jan 18 02:41:38 cartan wait_for_sysfs[6192]: either wait_for_sysfs (udev 039)
needs an update to handle the device '/block/sdb' properly (no bus device
link) or the sysfs-support of your device's driver needs to be fixed, please
report to <linux-hotplug-devel@lists.sourceforge.net>
Jan 18 02:41:48 cartan hal.hotplug[6194]: timout(10000 ms) waiting
for /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.8/host2/2:0:0:0
Jan 18 02:42:12 cartan kernel: sdb:<6>scsi: Device offlined - not ready after
error recovery: host 2 channel 0 id 0 lun 0
Jan 18 02:42:13 cartan kernel: SCSI error : <2 0 0 0> return code = 0x50000
Jan 18 02:42:13 cartan kernel: end_request: I/O error, dev sdb, sector 1921016
Jan 18 02:42:13 cartan kernel: Buffer I/O error on device sdb, logical block
Jan 18 02:42:13 cartan kernel: scsi2 (0:0): rejecting I/O to offline device
Jan 18 02:42:13 cartan kernel: Buffer I/O error on device sdb, logical block
240127
Jan 18 02:42:13 cartan kernel: sdb1
Jan 18 02:42:13 cartan kernel: Attached scsi removable disk sdb at scsi2,
channel 0, id 0, lun 0
Jan 18 02:42:13 cartan kernel: usbcore: registered new driver usb-storage
Jan 18 02:42:13 cartan kernel: USB Mass Storage support registered.
Jan 18 02:42:13 cartan hald[2597]: Timed out waiting for hotplug event 310.
Rebasing to 310
240127
an 18 02:42:13 cartan scsi.agent[6239]: disk
at /devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.8/host2/2:0:0:0
Jan 18 02:50:07 cartan kernel: usb 4-2: USB disconnect, address 2
--snip--
My Compliments, Frank
--
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x103432&bid#0486&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next reply other threads:[~2006-01-18 2:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-18 2:06 Tzschichholz, Frank [this message]
2006-01-18 4:04 ` usb-handy hotplug problem Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200601180306.21518.flock.greenwater@gmx.de \
--to=flock.greenwater@gmx.de \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).