* Re: Several udev questions
2006-05-12 20:00 Several udev questions Ondrej Zajicek
@ 2006-05-13 17:14 ` Kay Sievers
2006-05-16 16:07 ` Andrey Borzenkov
2006-05-16 20:34 ` Darren Salt
2 siblings, 0 replies; 4+ messages in thread
From: Kay Sievers @ 2006-05-13 17:14 UTC (permalink / raw)
To: linux-hotplug
On Fri, May 12, 2006 at 10:00:07PM +0200, Ondrej Zajicek wrote:
> 1) When i start system, i mount /dev, started udevd and udevtrigger. I
> don't explicitly copy (from /lib/udev/devices) or create any device
> nodes. It looks like all needed nodes are created in this way, although
> documentation (README) suggests copying some nodes before udevd start.
> What is the correct way - is the documentation obsolete, or am i miss
> something important?
/dev/null is needed by udevd itself, it will not fail but should be
around. Depending on the init scripts and what stuff you call from udev
rules, you may want more nodes directories and symlinks.
> 2) What is recommended time of start of udevd? I think it should be
> started early during boot process (i run it just after remounting root
> to rw) to create all needed devices. But if i want to do logging, i have
> to start syslogd before ulogd. But it is usually expected to run syslogd
> more late, especially after mounting of other filesystems from fstab (in
> case of /var on separate partition).
As you want device nodes for all other stuff, you need to start it as early
as possible. For now, it just logs to the console, if syslog is not available.
> Maybe there should be something like kernel's dmesg buffer to store ulogd
> messages generated before start of syslog.
You could change udev to write to /dev/kmsg and see it in dmesg. I think
the klibc build is doing this.
> 3) When i insert CF (and other) media with partition table, there is no
> hotplug event (for new partitions). I found some hacks like adding all
> possible partitions for that devices. Is the correct solution for this
> problem that kernel should send hotplug events in that case?
You need to open() the device something like every 2 seconds, to let the
kernel read the device state and discover media changes, then it will send
you the events. It's up to userspace to poll, like we do with HAL, at least
on all recent Desktop systems.
> 3) example configuration in /etc/udev/slackware has KERNEL= instead of
> KERNEL=
>
> 4) MODEd4 for event devices (in /etc/udev/frugalware/udev.rules)
> is pretty crazy.
It's up to the distro guys to send updated example rules, I don't have
these distros around and therefore can't update it.
> 5) What is a good place to load useful, subsytem specific but not
> dependent modules like sd_mod for SCSI disks, lp for parport devices,
> snd_pcm_oss for soundcards?
>
> - in /etc/modules or something similar?
> disadvantage - not very hot-plug.
I think it's fine, to load all module that are needed but don't autoload,
there are only very few left these days.
> - In module-init-tools (modprobe) configuration as install rule?
> disadvantage - as there is no concept of subsystem membership so there
> have to be one rule for one specific hardware driver, not one for class
> of drivers.
Hmm, you probably don't want to list all modules that create a device
that can also be used with a second module.
> - in udev.rules file?
We already do something like this:
SUBSYSTEM="scsi_device", ACTION="add", SYSFS{type}="0|7|14", RUN+="/sbin/modprobe sd_mod"
You could also try to add MODALIAS strings to the kernel scsi device
and match strings to the modules, than they would get autoloaded the
usual way.
Kay
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Several udev questions
2006-05-12 20:00 Several udev questions Ondrej Zajicek
2006-05-13 17:14 ` Kay Sievers
2006-05-16 16:07 ` Andrey Borzenkov
@ 2006-05-16 20:34 ` Darren Salt
2 siblings, 0 replies; 4+ messages in thread
From: Darren Salt @ 2006-05-16 20:34 UTC (permalink / raw)
To: linux-hotplug
I demand that Kay Sievers may or may not have written...
[snip]
> I think it's fine, to load all module that are needed but don't autoload,
Wait a minute. You're developing udev, which auto-loads modules, but you're
saying that it's fine to load them but not to auto-load them?
(ITYM "but aren't auto-loaded".)
[snip]
--
| Darren Salt | linux or ds at | nr. Ashington, | Toon
| RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army
| + Burn less waste. Use less packaging. Waste less. USE FEWER RESOURCES.
It is a wise father that knows his own child.
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 4+ messages in thread