Kernel 2.6.30 and udevd problem

Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

[Sorry, wrong udev list in previous message.]

Hello,

I have recently upgraded my kernel to 2.6.30 and I've noticed that at some 
point (randomly), udevd would start using a lot of CPU time. Killing the 
process and starting it with --debug option prints these messages when the 
problem starts:

[22652] event_queue_insert: seq 168515 queued, 'change' 'drm'
[22657] udev_device_new_from_syspath: device 0x2040320 has devpath 
'/devices/pci0000:00/0000:00:02.0/drm/card0'
[22657] udev_device_read_db: device 0x2040320 filled with db symlink data 
'/dev/dri/card0'
[22657] udev_rules_apply_to_event: LINK 'char/226:0' /lib/udev/rules.d/50-
udev-default.rules:5
[22657] udev_rules_apply_to_event: NAME 'dri/card0' /lib/udev/rules.d/50-udev-
default.rules:38
[22657] udev_rules_apply_to_event: GROUP 91 /lib/udev/rules.d/50-udev-
default.rules:42
[22657] udev_device_new_from_syspath: device 0x2040790 has devpath 
'/devices/pci0000:00/0000:00:02.0'
[22657] udev_device_new_from_syspath: device 0x2040a80 has devpath 
'/devices/pci0000:00'
[22657] udev_rules_apply_to_event: RUN 
'socket:@/org/freedesktop/hal/udev_event' /etc/udev/rules.d/90-hal.rules:2
[22657] udev_device_update_db: create db link (dri/card0 char/226:0)
[22657] udev_node_add: creating device node '/dev/dri/card0', devnum"6:0, 
mode\x0660, uid=0, gid‘
[22657] udev_node_mknod: preserve file '/dev/dri/card0', because it has correct 
dev_t
[22657] update_link: '/dev/char/226:0' with target '/dev/dri/card0' has the 
highest priority 0, create it
[22657] node_symlink: preserve already existing symlink '/dev/char/226:0' to 
'../dri/card0'
[22657] udev_monitor_send_device: passed 230 bytes to monitor 0x2040320
[22657] udev_monitor_send_device: passed -1 bytes to monitor 0x2036150
[22657] event_fork: seq 168515 exit with 0
[22652] event_fork: seq 168515 forked, pid [22657], 'change' 'drm', 0 seconds 
old
[22652] udev_done: seq 168515 cleanup, pid [22657], status 0, 0 seconds old


This sequence repeats ad infinitum. I have no clue what it means, so any help 
is appreciated.

My system is a Dell Studio desktop with Intel graphics (G45). I run a standard 
distro kernel (Arch Linux). Please ask me for any other relevant info.

Thanks,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Kay Sievers]

On Sun, Jun 28, 2009 at 08:21, Alberto Gonzalez<alberto6674@gmail.com> wrote:
> I have recently upgraded my kernel to 2.6.30 and I've noticed that at some
> point (randomly), udevd would start using a lot of CPU time. Killing the
> process and starting it with --debug option prints these messages when the
> problem starts:
>
> [22652] event_queue_insert: seq 168515 queued, 'change' 'drm'

Care to run:
  udevadm monitor
and provide the output of the event sequence dump?

Kay

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Sunday 28 June 2009 12:37:28 Kay Sievers wrote:
> On Sun, Jun 28, 2009 at 08:21, Alberto Gonzalez<alberto6674@gmail.com> 
wrote:
> > I have recently upgraded my kernel to 2.6.30 and I've noticed that at
> > some point (randomly), udevd would start using a lot of CPU time. Killing
> > the process and starting it with --debug option prints these messages
> > when the problem starts:
> >
> > [22652] event_queue_insert: seq 168515 queued, 'change' 'drm'
>
> Care to run:
>   udevadm monitor
> and provide the output of the event sequence dump?

This is what I got wen the problem finally came back (it happens randomly, this 
time I triggered it by running glxgears, but it can happen for other reasons 
and none of them triggers it automatically):

KERNEL[1246192153.094553] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
KERNEL[1246192153.094734] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
KERNEL[1246192153.095273] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
KERNEL[1246192153.095498] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
KERNEL[1246192153.095665] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
KERNEL[1246192153.095808] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.096463] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
KERNEL[1246192153.099394] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.103806] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.111549] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.120800] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.127997] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.135699] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.143440] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.151183] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.157421] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.163320] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.170793] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.178593] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)


So just an endless loop of the same message again and again.

Thanks,
Alberto.
>
> Kay

Re: Kernel 2.6.30 and udevd problem

[Kay Sievers]

On Sun, Jun 28, 2009 at 14:37, Alberto Gonzalez<alberto6674@gmail.com> wrote:

> This is what I got wen the problem finally came back (it happens randomly, this
> time I triggered it by running glxgears, but it can happen for other reasons
> and none of them triggers it automatically):
>
> KERNEL[1246192153.094553] change   /devices/pci0000:00/0000:00:02.0/drm/card0
> (drm)

> UDEV  [1246192153.178593] change   /devices/pci0000:00/0000:00:02.0/drm/card0
> (drm)
>
> So just an endless loop of the same message again and again.

If you see this loop and kill the udev daemon, the UDEV events will
stop. But do the KERNEL events continue, or do all events stop? This
should tell us if some udev rules trigger something here, or if it is
a loop in the kernel.

Kay

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Sunday 28 June 2009 14:49:52 Kay Sievers wrote:
> On Sun, Jun 28, 2009 at 14:37, Alberto Gonzalez<alberto6674@gmail.com> 
wrote:
> > This is what I got wen the problem finally came back (it happens
> > randomly, this time I triggered it by running glxgears, but it can happen
> > for other reasons and none of them triggers it automatically):
> >
> > KERNEL[1246192153.094553] change  
> > /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
> >
> > UDEV  [1246192153.178593] change  
> > /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
> >
> > So just an endless loop of the same message again and again.
>
> If you see this loop and kill the udev daemon, the UDEV events will
> stop. But do the KERNEL events continue, or do all events stop? This
> should tell us if some udev rules trigger something here, or if it is
> a loop in the kernel.

When I kill udevd, the KERNEL messages continue.

>
> Kay

Re: Kernel 2.6.30 and udevd problem

[Kay Sievers]

On Sun, Jun 28, 2009 at 16:22, Alberto Gonzalez<alberto6674@gmail.com> wrote:
> On Sunday 28 June 2009 14:49:52 Kay Sievers wrote:
>> On Sun, Jun 28, 2009 at 14:37, Alberto Gonzalez<alberto6674@gmail.com>
> wrote:
>> > This is what I got wen the problem finally came back (it happens
>> > randomly, this time I triggered it by running glxgears, but it can happen
>> > for other reasons and none of them triggers it automatically):
>> >
>> > KERNEL[1246192153.094553] change
>> > /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
>> >
>> > UDEV  [1246192153.178593] change
>> > /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
>> >
>> > So just an endless loop of the same message again and again.
>>
>> If you see this loop and kill the udev daemon, the UDEV events will
>> stop. But do the KERNEL events continue, or do all events stop? This
>> should tell us if some udev rules trigger something here, or if it is
>> a loop in the kernel.
>
> When I kill udevd, the KERNEL messages continue.

If there isn't something else running which acts on uevents that
trigger drm events, which I wouldn't expect, it seems like a drm
kernel problem.

Kay

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> If there isn't something else running which acts on uevents that
> trigger drm events, which I wouldn't expect, it seems like a drm
> kernel problem.

Ok, thanks for looking at it. I'll sum up the problem for DRM people:

The problem started after upgrading to 2.6.30. At some point, udevd starts to 
use a lot of CPU time. It happens randomly, but it seems easier to trigger 
when running something graphics intensive (glxgears, gtkperf, tuxracer..).

Killing udevd and starting it with the --debug switch throws up this when the 
problem starts:

[22652] event_queue_insert: seq 168515 queued, 'change' 'drm'
[22657] udev_device_new_from_syspath: device 0x2040320 has devpath 
'/devices/pci0000:00/0000:00:02.0/drm/card0'
[22657] udev_device_read_db: device 0x2040320 filled with db symlink data 
'/dev/dri/card0'
[22657] udev_rules_apply_to_event: LINK 'char/226:0' /lib/udev/rules.d/50-
udev-default.rules:5
[22657] udev_rules_apply_to_event: NAME 'dri/card0' /lib/udev/rules.d/50-udev-
default.rules:38
[22657] udev_rules_apply_to_event: GROUP 91 /lib/udev/rules.d/50-udev-
default.rules:42
[22657] udev_device_new_from_syspath: device 0x2040790 has devpath 
'/devices/pci0000:00/0000:00:02.0'
[22657] udev_device_new_from_syspath: device 0x2040a80 has devpath 
'/devices/pci0000:00'
[22657] udev_rules_apply_to_event: RUN 
'socket:@/org/freedesktop/hal/udev_event' /etc/udev/rules.d/90-hal.rules:2
[22657] udev_device_update_db: create db link (dri/card0 char/226:0)
[22657] udev_node_add: creating device node '/dev/dri/card0', devnum"6:0, 
mode\x0660, uid=0, gid‘
[22657] udev_node_mknod: preserve file '/dev/dri/card0', because it has correct 
dev_t
[22657] update_link: '/dev/char/226:0' with target '/dev/dri/card0' has the 
highest priority 0, create it
[22657] node_symlink: preserve already existing symlink '/dev/char/226:0' to 
'../dri/card0'
[22657] udev_monitor_send_device: passed 230 bytes to monitor 0x2040320
[22657] udev_monitor_send_device: passed -1 bytes to monitor 0x2036150
[22657] event_fork: seq 168515 exit with 0
[22652] event_fork: seq 168515 forked, pid [22657], 'change' 'drm', 0 seconds 
old
[22652] udev_done: seq 168515 cleanup, pid [22657], status 0, 0 seconds old

It goes on in an infinite loop.

Then using "udevadm monitor" I also get a loop of these two messages:

KERNEL[1246192153.094553] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)
UDEV  [1246192153.096463] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
(drm)

Killing udevd stops the UDEV messages (and CPU usage goes down), but the 
KERNEL messages continue.

My system is a Dell Studio desktop with Intel graphics (G45). I'm using a 
standard distro kernel (Arch LInux). The problem occurs both with EXA and with 
UXA+KMS, and in both 32 bit and 64 bit systems.

Thanks,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Dave Airlie]

> On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> > If there isn't something else running which acts on uevents that
> > trigger drm events, which I wouldn't expect, it seems like a drm
> > kernel problem.
> 
> Ok, thanks for looking at it. I'll sum up the problem for DRM people:
> 
> The problem started after upgrading to 2.6.30. At some point, udevd starts to 
> use a lot of CPU time. It happens randomly, but it seems easier to trigger 
> when running something graphics intensive (glxgears, gtkperf, tuxracer..).
> 
> Killing udevd and starting it with the --debug switch throws up this when the 
> problem starts:

I've added jbarnes to the list,

Jesses are we sending events yet? what for?

Dave.

> 
> [22652] event_queue_insert: seq 168515 queued, 'change' 'drm'
> [22657] udev_device_new_from_syspath: device 0x2040320 has devpath 
> '/devices/pci0000:00/0000:00:02.0/drm/card0'
> [22657] udev_device_read_db: device 0x2040320 filled with db symlink data 
> '/dev/dri/card0'
> [22657] udev_rules_apply_to_event: LINK 'char/226:0' /lib/udev/rules.d/50-
> udev-default.rules:5
> [22657] udev_rules_apply_to_event: NAME 'dri/card0' /lib/udev/rules.d/50-udev-
> default.rules:38
> [22657] udev_rules_apply_to_event: GROUP 91 /lib/udev/rules.d/50-udev-
> default.rules:42
> [22657] udev_device_new_from_syspath: device 0x2040790 has devpath 
> '/devices/pci0000:00/0000:00:02.0'
> [22657] udev_device_new_from_syspath: device 0x2040a80 has devpath 
> '/devices/pci0000:00'
> [22657] udev_rules_apply_to_event: RUN 
> 'socket:@/org/freedesktop/hal/udev_event' /etc/udev/rules.d/90-hal.rules:2
> [22657] udev_device_update_db: create db link (dri/card0 char/226:0)
> [22657] udev_node_add: creating device node '/dev/dri/card0', devnum"6:0, 
> mode\x0660, uid=0, gid‘
> [22657] udev_node_mknod: preserve file '/dev/dri/card0', because it has correct 
> dev_t
> [22657] update_link: '/dev/char/226:0' with target '/dev/dri/card0' has the 
> highest priority 0, create it
> [22657] node_symlink: preserve already existing symlink '/dev/char/226:0' to 
> '../dri/card0'
> [22657] udev_monitor_send_device: passed 230 bytes to monitor 0x2040320
> [22657] udev_monitor_send_device: passed -1 bytes to monitor 0x2036150
> [22657] event_fork: seq 168515 exit with 0
> [22652] event_fork: seq 168515 forked, pid [22657], 'change' 'drm', 0 seconds 
> old
> [22652] udev_done: seq 168515 cleanup, pid [22657], status 0, 0 seconds old
> 
> It goes on in an infinite loop.
> 
> Then using "udevadm monitor" I also get a loop of these two messages:
> 
> KERNEL[1246192153.094553] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
> (drm)
> UDEV  [1246192153.096463] change   /devices/pci0000:00/0000:00:02.0/drm/card0 
> (drm)
> 
> Killing udevd stops the UDEV messages (and CPU usage goes down), but the 
> KERNEL messages continue.
> 
> My system is a Dell Studio desktop with Intel graphics (G45). I'm using a 
> standard distro kernel (Arch LInux). The problem occurs both with EXA and with 
> UXA+KMS, and in both 32 bit and 64 bit systems.
> 
> Thanks,
> Alberto.
> 
> 

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

On Tue, 30 Jun 2009 04:46:38 +0100 (IST)
Dave Airlie <airlied@linux.ie> wrote:

> 
> > On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> > > If there isn't something else running which acts on uevents that
> > > trigger drm events, which I wouldn't expect, it seems like a drm
> > > kernel problem.
> > 
> > Ok, thanks for looking at it. I'll sum up the problem for DRM
> > people:
> > 
> > The problem started after upgrading to 2.6.30. At some point, udevd
> > starts to use a lot of CPU time. It happens randomly, but it seems
> > easier to trigger when running something graphics intensive
> > (glxgears, gtkperf, tuxracer..).
> > 
> > Killing udevd and starting it with the --debug switch throws up
> > this when the problem starts:
> 
> I've added jbarnes to the list,
> 
> Jesses are we sending events yet? what for?

Right now we just send uevents at hotplug time, so maybe one of our
hotplug interrupt bits is getting stuck, resulting in a continuous
stream of events as we generate other interrupts (which would happen
when running 3D apps for example).

There's a DRM_DEBUG statement in drivers/gpu/drm/i915/i915_irq.c under
the if (I915_HAS_HOTPLUG(dev)) { check, if you make it into DRM_ERROR
we can see which one is getting stuck.

-- 
Jesse Barnes, Intel Open Source Technology Center

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Tuesday 30 June 2009 18:08:35 Jesse Barnes wrote:
> On Tue, 30 Jun 2009 04:46:38 +0100 (IST)
>
> Dave Airlie <airlied@linux.ie> wrote:
> > > On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> > > > If there isn't something else running which acts on uevents that
> > > > trigger drm events, which I wouldn't expect, it seems like a drm
> > > > kernel problem.
> > >
> > > Ok, thanks for looking at it. I'll sum up the problem for DRM
> > > people:
> > >
> > > The problem started after upgrading to 2.6.30. At some point, udevd
> > > starts to use a lot of CPU time. It happens randomly, but it seems
> > > easier to trigger when running something graphics intensive
> > > (glxgears, gtkperf, tuxracer..).
> > >
> > > Killing udevd and starting it with the --debug switch throws up
> > > this when the problem starts:
> >
> > I've added jbarnes to the list,
> >
> > Jesses are we sending events yet? what for?
>
> Right now we just send uevents at hotplug time, so maybe one of our
> hotplug interrupt bits is getting stuck, resulting in a continuous
> stream of events as we generate other interrupts (which would happen
> when running 3D apps for example).
>
> There's a DRM_DEBUG statement in drivers/gpu/drm/i915/i915_irq.c under
> the if (I915_HAS_HOTPLUG(dev)) { check, if you make it into DRM_ERROR
> we can see which one is getting stuck.

I am afraid I'll need a bit more guidance here. I guess this means patching 
the kernel. Would it be possible to get a test patch against 2.6.30? And then 
after patching and compiling, how should I debug it?

Thanks,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

[-- Attachment #1: Type: text/plain, Size: 1961 bytes --]

On Wed, 1 Jul 2009 09:09:03 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Tuesday 30 June 2009 18:08:35 Jesse Barnes wrote:
> > On Tue, 30 Jun 2009 04:46:38 +0100 (IST)
> >
> > Dave Airlie <airlied@linux.ie> wrote:
> > > > On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> > > > > If there isn't something else running which acts on uevents
> > > > > that trigger drm events, which I wouldn't expect, it seems
> > > > > like a drm kernel problem.
> > > >
> > > > Ok, thanks for looking at it. I'll sum up the problem for DRM
> > > > people:
> > > >
> > > > The problem started after upgrading to 2.6.30. At some point,
> > > > udevd starts to use a lot of CPU time. It happens randomly, but
> > > > it seems easier to trigger when running something graphics
> > > > intensive (glxgears, gtkperf, tuxracer..).
> > > >
> > > > Killing udevd and starting it with the --debug switch throws up
> > > > this when the problem starts:
> > >
> > > I've added jbarnes to the list,
> > >
> > > Jesses are we sending events yet? what for?
> >
> > Right now we just send uevents at hotplug time, so maybe one of our
> > hotplug interrupt bits is getting stuck, resulting in a continuous
> > stream of events as we generate other interrupts (which would happen
> > when running 3D apps for example).
> >
> > There's a DRM_DEBUG statement in drivers/gpu/drm/i915/i915_irq.c
> > under the if (I915_HAS_HOTPLUG(dev)) { check, if you make it into
> > DRM_ERROR we can see which one is getting stuck.
> 
> I am afraid I'll need a bit more guidance here. I guess this means
> patching the kernel. Would it be possible to get a test patch against
> 2.6.30? And then after patching and compiling, how should I debug it?

Here's a patch against git, it should apply to 2.6.30 though I think.

I'll just need your dmesg output from when the problem is occurring (if
I'm right this patch should flood your logs).

-- 
Jesse Barnes, Intel Open Source Technology Center


[-- Attachment #2: i915-hotplug-error.patch --]
[-- Type: text/x-patch, Size: 596 bytes --]

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 228546f..6c31408 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -353,7 +353,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		    (iir & I915_DISPLAY_PORT_INTERRUPT)) {
 			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
 
-			DRM_DEBUG("hotplug event received, stat 0x%08x\n",
+			DRM_ERROR("hotplug event received, stat 0x%08x\n",
 				  hotplug_status);
 			if (hotplug_status & dev_priv->hotplug_supported_mask)
 				schedule_work(&dev_priv->hotplug_work);

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Wednesday 01 July 2009 19:22:14 Jesse Barnes wrote:
> On Wed, 1 Jul 2009 09:09:03 +0200
>
> Alberto Gonzalez <alberto6674@gmail.com> wrote:
> > On Tuesday 30 June 2009 18:08:35 Jesse Barnes wrote:
> > > On Tue, 30 Jun 2009 04:46:38 +0100 (IST)
> > >
> > > Dave Airlie <airlied@linux.ie> wrote:
> > > > > On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> > > > > > If there isn't something else running which acts on uevents
> > > > > > that trigger drm events, which I wouldn't expect, it seems
> > > > > > like a drm kernel problem.
> > > > >
> > > > > Ok, thanks for looking at it. I'll sum up the problem for DRM
> > > > > people:
> > > > >
> > > > > The problem started after upgrading to 2.6.30. At some point,
> > > > > udevd starts to use a lot of CPU time. It happens randomly, but
> > > > > it seems easier to trigger when running something graphics
> > > > > intensive (glxgears, gtkperf, tuxracer..).
> > > > >
> > > > > Killing udevd and starting it with the --debug switch throws up
> > > > > this when the problem starts:
> > > >
> > > > I've added jbarnes to the list,
> > > >
> > > > Jesses are we sending events yet? what for?
> > >
> > > Right now we just send uevents at hotplug time, so maybe one of our
> > > hotplug interrupt bits is getting stuck, resulting in a continuous
> > > stream of events as we generate other interrupts (which would happen
> > > when running 3D apps for example).
> > >
> > > There's a DRM_DEBUG statement in drivers/gpu/drm/i915/i915_irq.c
> > > under the if (I915_HAS_HOTPLUG(dev)) { check, if you make it into
> > > DRM_ERROR we can see which one is getting stuck.
> >
> > I am afraid I'll need a bit more guidance here. I guess this means
> > patching the kernel. Would it be possible to get a test patch against
> > 2.6.30? And then after patching and compiling, how should I debug it?
>
> Here's a patch against git, it should apply to 2.6.30 though I think.
>
> I'll just need your dmesg output from when the problem is occurring (if
> I'm right this patch should flood your logs).

Thanks, the patch applied to 2.6.30 and when the problem stars I get these two 
lines repeated all the time in dmesg:

[drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300

Is this enough or should I provide something else?

Alberto.

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

[-- Attachment #1: Type: text/plain, Size: 2763 bytes --]

On Thu, 2 Jul 2009 08:18:58 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Wednesday 01 July 2009 19:22:14 Jesse Barnes wrote:
> > On Wed, 1 Jul 2009 09:09:03 +0200
> >
> > Alberto Gonzalez <alberto6674@gmail.com> wrote:
> > > On Tuesday 30 June 2009 18:08:35 Jesse Barnes wrote:
> > > > On Tue, 30 Jun 2009 04:46:38 +0100 (IST)
> > > >
> > > > Dave Airlie <airlied@linux.ie> wrote:
> > > > > > On Sunday 28 June 2009 16:28:44 Kay Sievers wrote:
> > > > > > > If there isn't something else running which acts on
> > > > > > > uevents that trigger drm events, which I wouldn't expect,
> > > > > > > it seems like a drm kernel problem.
> > > > > >
> > > > > > Ok, thanks for looking at it. I'll sum up the problem for
> > > > > > DRM people:
> > > > > >
> > > > > > The problem started after upgrading to 2.6.30. At some
> > > > > > point, udevd starts to use a lot of CPU time. It happens
> > > > > > randomly, but it seems easier to trigger when running
> > > > > > something graphics intensive (glxgears, gtkperf,
> > > > > > tuxracer..).
> > > > > >
> > > > > > Killing udevd and starting it with the --debug switch
> > > > > > throws up this when the problem starts:
> > > > >
> > > > > I've added jbarnes to the list,
> > > > >
> > > > > Jesses are we sending events yet? what for?
> > > >
> > > > Right now we just send uevents at hotplug time, so maybe one of
> > > > our hotplug interrupt bits is getting stuck, resulting in a
> > > > continuous stream of events as we generate other interrupts
> > > > (which would happen when running 3D apps for example).
> > > >
> > > > There's a DRM_DEBUG statement in drivers/gpu/drm/i915/i915_irq.c
> > > > under the if (I915_HAS_HOTPLUG(dev)) { check, if you make it
> > > > into DRM_ERROR we can see which one is getting stuck.
> > >
> > > I am afraid I'll need a bit more guidance here. I guess this means
> > > patching the kernel. Would it be possible to get a test patch
> > > against 2.6.30? And then after patching and compiling, how should
> > > I debug it?
> >
> > Here's a patch against git, it should apply to 2.6.30 though I
> > think.
> >
> > I'll just need your dmesg output from when the problem is occurring
> > (if I'm right this patch should flood your logs).
> 
> Thanks, the patch applied to 2.6.30 and when the problem stars I get
> these two lines repeated all the time in dmesg:
> 
> [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat
> 0x10200300 [drm:i915_driver_irq_handler] *ERROR* hotplug event
> received, stat 0x18200300
> 
> Is this enough or should I provide something else?

Interesting.  That hotplug status shouldn't end up generating any
uevents.  Can you try this patch to see what's going on?

-- 
Jesse Barnes, Intel Open Source Technology Center

[-- Attachment #2: drm-uevent-debug.patch --]
[-- Type: text/x-patch, Size: 1282 bytes --]

diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 85ec31b..d4c6d82 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -456,6 +456,8 @@ void drm_sysfs_hotplug_event(struct drm_device *dev)
 	char *event_string = "HOTPLUG=1";
 	char *envp[] = { event_string, NULL };
 
+	WARN(1, "hotplug uevent\n");
+
 	DRM_DEBUG("generating hotplug event\n");
 
 	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 228546f..29e1e4b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -353,10 +353,12 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		    (iir & I915_DISPLAY_PORT_INTERRUPT)) {
 			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
 
-			DRM_DEBUG("hotplug event received, stat 0x%08x\n",
-				  hotplug_status);
-			if (hotplug_status & dev_priv->hotplug_supported_mask)
+			if (hotplug_status & dev_priv->hotplug_supported_mask) {
+				DRM_DEBUG("hotplug event received: 0x%08x\n",
+					  hotplug_status &
+					  dev_priv->hotplug_supported_mask);
 				schedule_work(&dev_priv->hotplug_work);
+			}
 
 			I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
 			I915_READ(PORT_HOTPLUG_STAT);

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Thursday 02 July 2009 18:35:47 Jesse Barnes wrote:
> On Thu, 2 Jul 2009 08:18:58 +0200
>
> Alberto Gonzalez <alberto6674@gmail.com> wrote:
> > Thanks, the patch applied to 2.6.30 and when the problem stars I get
> > these two lines repeated all the time in dmesg:
> >
> > [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat
> > 0x10200300 [drm:i915_driver_irq_handler] *ERROR* hotplug event
> > received, stat 0x18200300
> >
> > Is this enough or should I provide something else?
>
> Interesting.  That hotplug status shouldn't end up generating any
> uevents.  Can you try this patch to see what's going on?

This is what I get with the patch applied (repeated again and again):

------------[ cut here ]------------
WARNING: at drivers/gpu/drm/drm_sysfs.c:452 drm_sysfs_hotplug_event+0x3e/0x90 
[drm]()
Hardware name: Studio 540
hotplug uevent
Modules linked in: ipv6 usbhid hid ext4 jbd2 crc16 usb_storage snd_seq_dummy 
snd_hda_codec_intelhdmi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device 
snd_hda_codec_realtek snd_pcm_oss snd_mixer_oss psmouse ohci1394 snd_hda_intel 
ieee1394 i2c_i801 uhci_hcd serio_raw sg dcdbas iTCO_wdt iTCO_vendor_support 
snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc r8169 
mii ehci_hcd usbcore evdev thermal fan button battery ac cpufreq_ondemand 
acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache 
sd_mod sr_mod cdrom pata_acpi ata_generic ata_piix libata scsi_mod i915 
i2c_algo_bit video output drm i2c_core intel_agp agpgart
Pid: 9, comm: events/0 Tainted: G        W  2.6.30-ARCH #1
Call Trace:
 [<c013b17a>] ? warn_slowpath_common+0x7a/0xc0
 [<f82be0fe>] ? drm_sysfs_hotplug_event+0x3e/0x90 [drm]
 [<f83bb410>] ? i915_hotplug_work_func+0x0/0x30 [i915]
 [<c013b237>] ? warn_slowpath_fmt+0x37/0x60
 [<f82be0fe>] ? drm_sysfs_hotplug_event+0x3e/0x90 [drm]
 [<c014f61f>] ? worker_thread+0x11f/0x280
 [<c0154900>] ? autoremove_wake_function+0x0/0x60
 [<c014f500>] ? worker_thread+0x0/0x280
 [<c0154452>] ? kthread+0x52/0x90
 [<c0154400>] ? kthread+0x0/0x90
 [<c01047c7>] ? kernel_thread_helper+0x7/0x10
---[ end trace a39351f6aee6be08 ]---

Thanks,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Michal Soltys]

Regarding Arch's default distro kernel - it's a bit patched. Most of the 
patch file is addition of aufs, but there're other diffs included as 
well, some of them modifying i915_reg.h, intel_display.c and intel_tv.c

ftp://ftp.archlinux.org/other/kernel26/patch-2.6.30-5-ARCH.bz2

Not sure how relevant that is, but fyi.

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Friday 03 July 2009 00:00:49 Michal Soltys wrote:
> Regarding Arch's default distro kernel - it's a bit patched. Most of the
> patch file is addition of aufs, but there're other diffs included as
> well, some of them modifying i915_reg.h, intel_display.c and intel_tv.c
>
> ftp://ftp.archlinux.org/other/kernel26/patch-2.6.30-5-ARCH.bz2
>
> Not sure how relevant that is, but fyi.

Yes, thanks for pointing that out.

I now tried a vanilla 2.6.30.1 kernel with a custom config (so I don't have to 
wait 45 minutes for it to compile) and I still see the problem. This is what I 
get in dmesg:

[   83.506496] ------------[ cut here ]------------
[   83.506500] WARNING: at drivers/gpu/drm/drm_sysfs.c:452 
drm_sysfs_hotplug_event+0x2b/0x63()
[   83.506502] Hardware name: Studio 540
[   83.506503] hotplug uevent
[   83.506504] Modules linked in:
[   83.506506] Pid: 7, comm: events/0 Tainted: G        W  2.6.30.1 #1
[   83.506507] Call Trace:
[   83.506511]  [<c1025df9>] warn_slowpath_common+0x65/0x7c
[   83.506514]  [<c11e9f9e>] ? drm_sysfs_hotplug_event+0x2b/0x63
[   83.506517]  [<c1025e44>] warn_slowpath_fmt+0x24/0x27
[   83.506520]  [<c11e9f9e>] drm_sysfs_hotplug_event+0x2b/0x63
[   83.506523]  [<c11f33de>] i915_hotplug_work_func+0xe/0x10
[   83.506525]  [<c1032f28>] worker_thread+0x131/0x1ab
[   83.506528]  [<c11f33d0>] ? i915_hotplug_work_func+0x0/0x10
[   83.506531]  [<c1035f61>] ? autoremove_wake_function+0x0/0x2f
[   83.506534]  [<c1032df7>] ? worker_thread+0x0/0x1ab
[   83.506536]  [<c1035c84>] kthread+0x46/0x6a
[   83.506538]  [<c1035c3e>] ? kthread+0x0/0x6a
[   83.506541]  [<c10033cf>] kernel_thread_helper+0x7/0x10
[   83.506542] ---[ end trace 08f91010f92f7c3c ]---

Thanks,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

On Sun, 5 Jul 2009 00:10:43 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Friday 03 July 2009 00:00:49 Michal Soltys wrote:
> > Regarding Arch's default distro kernel - it's a bit patched. Most
> > of the patch file is addition of aufs, but there're other diffs
> > included as well, some of them modifying i915_reg.h,
> > intel_display.c and intel_tv.c
> >
> > ftp://ftp.archlinux.org/other/kernel26/patch-2.6.30-5-ARCH.bz2
> >
> > Not sure how relevant that is, but fyi.
> 
> Yes, thanks for pointing that out.
> 
> I now tried a vanilla 2.6.30.1 kernel with a custom config (so I
> don't have to wait 45 minutes for it to compile) and I still see the
> problem. This is what I get in dmesg:
> 
> [   83.506496] ------------[ cut here ]------------
> [   83.506500] WARNING: at drivers/gpu/drm/drm_sysfs.c:452 
> drm_sysfs_hotplug_event+0x2b/0x63()
> [   83.506502] Hardware name: Studio 540
> [   83.506503] hotplug uevent
> [   83.506504] Modules linked in:
> [   83.506506] Pid: 7, comm: events/0 Tainted: G        W  2.6.30.1 #1
> [   83.506507] Call Trace:
> [   83.506511]  [<c1025df9>] warn_slowpath_common+0x65/0x7c
> [   83.506514]  [<c11e9f9e>] ? drm_sysfs_hotplug_event+0x2b/0x63
> [   83.506517]  [<c1025e44>] warn_slowpath_fmt+0x24/0x27
> [   83.506520]  [<c11e9f9e>] drm_sysfs_hotplug_event+0x2b/0x63
> [   83.506523]  [<c11f33de>] i915_hotplug_work_func+0xe/0x10
> [   83.506525]  [<c1032f28>] worker_thread+0x131/0x1ab
> [   83.506528]  [<c11f33d0>] ? i915_hotplug_work_func+0x0/0x10
> [   83.506531]  [<c1035f61>] ? autoremove_wake_function+0x0/0x2f
> [   83.506534]  [<c1032df7>] ? worker_thread+0x0/0x1ab
> [   83.506536]  [<c1035c84>] kthread+0x46/0x6a
> [   83.506538]  [<c1035c3e>] ? kthread+0x0/0x6a
> [   83.506541]  [<c10033cf>] kernel_thread_helper+0x7/0x10
> [   83.506542] ---[ end trace 08f91010f92f7c3c ]---

Sorry I missed this update; what about the register dump part of the
patch?  Presumably you get a ton of these in your log, but with some
IIR register info beforehand?

-- 
Jesse Barnes, Intel Open Source Technology Center

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Monday 20 July 2009 20:10:10 Jesse Barnes wrote:
> Alberto Gonzalez <alberto6674@gmail.com> wrote:
> > I now tried a vanilla 2.6.30.1 kernel with a custom config (so I
> > don't have to wait 45 minutes for it to compile) and I still see the
> > problem. This is what I get in dmesg:
> >
> > [   83.506496] ------------[ cut here ]------------
> > [   83.506500] WARNING: at drivers/gpu/drm/drm_sysfs.c:452
> > drm_sysfs_hotplug_event+0x2b/0x63()
> > [   83.506502] Hardware name: Studio 540
> > [   83.506503] hotplug uevent
> > [   83.506504] Modules linked in:
> > [   83.506506] Pid: 7, comm: events/0 Tainted: G        W  2.6.30.1 #1
> > [   83.506507] Call Trace:
> > [   83.506511]  [<c1025df9>] warn_slowpath_common+0x65/0x7c
> > [   83.506514]  [<c11e9f9e>] ? drm_sysfs_hotplug_event+0x2b/0x63
> > [   83.506517]  [<c1025e44>] warn_slowpath_fmt+0x24/0x27
> > [   83.506520]  [<c11e9f9e>] drm_sysfs_hotplug_event+0x2b/0x63
> > [   83.506523]  [<c11f33de>] i915_hotplug_work_func+0xe/0x10
> > [   83.506525]  [<c1032f28>] worker_thread+0x131/0x1ab
> > [   83.506528]  [<c11f33d0>] ? i915_hotplug_work_func+0x0/0x10
> > [   83.506531]  [<c1035f61>] ? autoremove_wake_function+0x0/0x2f
> > [   83.506534]  [<c1032df7>] ? worker_thread+0x0/0x1ab
> > [   83.506536]  [<c1035c84>] kthread+0x46/0x6a
> > [   83.506538]  [<c1035c3e>] ? kthread+0x0/0x6a
> > [   83.506541]  [<c10033cf>] kernel_thread_helper+0x7/0x10
> > [   83.506542] ---[ end trace 08f91010f92f7c3c ]---
>
> Sorry I missed this update; what about the register dump part of the
> patch?  Presumably you get a ton of these in your log, but with some
> IIR register info beforehand?

The problem is that when this happens I get these messages at a very high 
rate, so they flood my dmesg in a few seconds. Is there a way I could access 
that register dump that should precede them?

Thanks,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

[-- Attachment #1: Type: text/plain, Size: 716 bytes --]

On Wed, 22 Jul 2009 15:25:29 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Tuesday 21 July 2009 00:48:36 Alberto Gonzalez wrote:
> > If what you need is the exact lines just before the "storm" starts
> > let me know and I'll keep trying, but it's not easy because I'll
> > have to be very fast in detecting the problem has started and
> > logging the output of dmesg.
> 
> Ok, I caught a complete log from boot to when the problem starts.
> There doesn't seem to be anything significantly different, but just
> in case.

Oh I guess this is without the debug patch I attached...  this one
should be a bit less noisy but tell me which bit is stuck.

-- 
Jesse Barnes, Intel Open Source Technology Center

[-- Attachment #2: i915-hotplug-error.patch --]
[-- Type: text/x-patch, Size: 596 bytes --]

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 228546f..6c31408 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -353,7 +353,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		    (iir & I915_DISPLAY_PORT_INTERRUPT)) {
 			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
 
-			DRM_DEBUG("hotplug event received, stat 0x%08x\n",
+			DRM_ERROR("hotplug event received, stat 0x%08x\n",
 				  hotplug_status);
 			if (hotplug_status & dev_priv->hotplug_supported_mask)
 				schedule_work(&dev_priv->hotplug_work);

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

[-- Attachment #1: Type: text/plain, Size: 1076 bytes --]

On Wed, 22 Jul 2009 18:51:20 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Wednesday 22 July 2009 18:08:34 Jesse Barnes wrote:
> > On Wed, 22 Jul 2009 15:25:29 +0200
> > Alberto Gonzalez <alberto6674@gmail.com> wrote:
> > > Ok, I caught a complete log from boot to when the problem starts.
> > > There doesn't seem to be anything significantly different, but
> > > just in case.
> >
> > Oh I guess this is without the debug patch I attached...  this one
> > should be a bit less noisy but tell me which bit is stuck.
> 
> Actually it was with the debug patch found here applied:
> 
> http://lkml.org/lkml/2009/7/2/290
> 
> Now I captured another one with the latest patch. This time the
> problem started after opening Amarok.
> 

Ah I must have been looking at the wrong register.  This one makes it
look like one of your HDMI hotplug bits is getting stuck (HDMIC in
particular).  This might not even be wired up on your platform...

This test hack should prevent us from responding to those interrupts...

-- 
Jesse Barnes, Intel Open Source Technology Center

[-- Attachment #2: i915-g4x-hotplug-hack.patch --]
[-- Type: text/x-patch, Size: 562 bytes --]

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index f340b3f..ecbf0b2 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -962,7 +962,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 		dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
 			TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
 			SDVOB_HOTPLUG_INT_STATUS;
-		if (IS_G4X(dev)) {
+		if (IS_G4X(dev) && 0) {
 			dev_priv->hotplug_supported_mask |=
 				HDMIB_HOTPLUG_INT_STATUS |
 				HDMIC_HOTPLUG_INT_STATUS |

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Wednesday 22 July 2009 19:12:51 Jesse Barnes wrote:
> Ah I must have been looking at the wrong register.  This one makes it
> look like one of your HDMI hotplug bits is getting stuck (HDMIC in
> particular).  This might not even be wired up on your platform...

Yes, I don't use HDMI, my screen is attached via VGA
>
> This test hack should prevent us from responding to those interrupts...

I've been hitting it hard for over an hour with all the usual tricks to 
trigger it (and a few reboots) and I've been unable to reproduce the problem 
with this patch. Before I could trigger it reliably in a few minutes, so I'm 
pretty sure this patch fixes it. If something new comes up, I'll let you know 
anyway.

Thank you very much!

Regards,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

On Wed, 22 Jul 2009 20:43:56 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Wednesday 22 July 2009 19:12:51 Jesse Barnes wrote:
> > Ah I must have been looking at the wrong register.  This one makes
> > it look like one of your HDMI hotplug bits is getting stuck (HDMIC
> > in particular).  This might not even be wired up on your platform...
> 
> Yes, I don't use HDMI, my screen is attached via VGA
> >
> > This test hack should prevent us from responding to those
> > interrupts...
> 
> I've been hitting it hard for over an hour with all the usual tricks
> to trigger it (and a few reboots) and I've been unable to reproduce
> the problem with this patch. Before I could trigger it reliably in a
> few minutes, so I'm pretty sure this patch fixes it. If something new
> comes up, I'll let you know anyway.
> 
> Thank you very much!

Great, thanks for testing... I'll try to come up with a better patch
and send it over to Eric.

Thanks,
-- 
Jesse Barnes, Intel Open Source Technology Center

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

On Wed, 22 Jul 2009 20:43:56 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Wednesday 22 July 2009 19:12:51 Jesse Barnes wrote:
> > Ah I must have been looking at the wrong register.  This one makes
> > it look like one of your HDMI hotplug bits is getting stuck (HDMIC
> > in particular).  This might not even be wired up on your platform...
> 
> Yes, I don't use HDMI, my screen is attached via VGA
> >
> > This test hack should prevent us from responding to those
> > interrupts...
> 
> I've been hitting it hard for over an hour with all the usual tricks
> to trigger it (and a few reboots) and I've been unable to reproduce
> the problem with this patch. Before I could trigger it reliably in a
> few minutes, so I'm pretty sure this patch fixes it. If something new
> comes up, I'll let you know anyway.

Hm, so this type of interrupt problem is *supposed* to be handled by
setting of the PEG_BAND_GAP_DATA reg (low bits set to 0xd).  Do you
have that in your tree?  Does git master have this problem?

Maybe we need to add a patch to 2.6.30.x to set PEG_BAND_GAP_DATA as a
workaround (git master already has code to do this properly for HDMI
and DP outputs afaict).

-- 
Jesse Barnes, Intel Open Source Technology Center

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

[-- Attachment #1: Type: text/plain, Size: 1554 bytes --]

On Wednesday 22 July 2009 21:44:36 Jesse Barnes wrote:
> On Wed, 22 Jul 2009 20:43:56 +0200
>
> Alberto Gonzalez <alberto6674@gmail.com> wrote:
> > On Wednesday 22 July 2009 19:12:51 Jesse Barnes wrote:
> > > Ah I must have been looking at the wrong register.  This one makes
> > > it look like one of your HDMI hotplug bits is getting stuck (HDMIC
> > > in particular).  This might not even be wired up on your platform...
> >
> > Yes, I don't use HDMI, my screen is attached via VGA
> >
> > > This test hack should prevent us from responding to those
> > > interrupts...
> >
> > I've been hitting it hard for over an hour with all the usual tricks
> > to trigger it (and a few reboots) and I've been unable to reproduce
> > the problem with this patch. Before I could trigger it reliably in a
> > few minutes, so I'm pretty sure this patch fixes it. If something new
> > comes up, I'll let you know anyway.
>
> Hm, so this type of interrupt problem is *supposed* to be handled by
> setting of the PEG_BAND_GAP_DATA reg (low bits set to 0xd).  Do you
> have that in your tree?  Does git master have this problem?

The problem started with 2.6.30 on a standard distro kernel (Arch Linux). 
Latest tests were with vanilla 2.6.30.1 and a cut down config (attached). I 
haven't tested .31.

I'll try to test latest git as soon as I can and let you know if the problem 
exists there.

>
> Maybe we need to add a patch to 2.6.30.x to set PEG_BAND_GAP_DATA as a
> workaround (git master already has code to do this properly for HDMI
> and DP outputs afaict).


[-- Attachment #2: config --]
[-- Type: text/plain, Size: 63033 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30.1
# Sat Jul  4 22:08:02 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

[-- Attachment #1: Type: text/plain, Size: 895 bytes --]

On Wednesday 22 July 2009 22:00:21 Alberto Gonzalez wrote:
> On Wednesday 22 July 2009 21:44:36 Jesse Barnes wrote:
> > Hm, so this type of interrupt problem is *supposed* to be handled by
> > setting of the PEG_BAND_GAP_DATA reg (low bits set to 0xd).  Do you
> > have that in your tree?  Does git master have this problem?
>
> The problem started with 2.6.30 on a standard distro kernel (Arch Linux).
> Latest tests were with vanilla 2.6.30.1 and a cut down config (attached). I
> haven't tested .31.
>
> I'll try to test latest git as soon as I can and let you know if the
> problem exists there.

I've tested 2.6.31 from git and I can reproduce the problem. Attached is the 
dmesg with the debug patch applied.

>
> > Maybe we need to add a patch to 2.6.30.x to set PEG_BAND_GAP_DATA as a
> > workaround (git master already has code to do this properly for HDMI
> > and DP outputs afaict).


[-- Attachment #2: dmesg-2.6.31.log --]
[-- Type: text/x-log, Size: 80057 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-rc3 (root@localhost) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP Thu Jul 23 01:44:51 CEST 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000c7d90000 (usable)
[    0.000000]  BIOS-e820: 00000000c7d90000 - 00000000c7d9e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000c7d9e000 - 00000000c7de0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000c7de0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0xc7d90 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 120000000 mask FF0000000 write-back
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 0C7E00000 mask FFFE00000 uncachable
[    0.000000]   6 base 0C8000000 mask FF8000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000c7e00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000c7d90000 (usable)
[    0.000000]  modified: 00000000c7d90000 - 00000000c7d9e000 (ACPI data)
[    0.000000]  modified: 00000000c7d9e000 - 00000000c7de0000 (ACPI NVS)
[    0.000000]  modified: 00000000c7de0000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 37fa0000 - 37fefc28
[    0.000000] Allocated new RAMDISK: 00008000 - 00057c28
[    0.000000] Move RAMDISK from 0000000037fa0000 - 0000000037fefc27 to 00008000 - 00057c27
[    0.000000] ACPI: RSDP 000f9cd0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT c7d90000 00044 (v01 DELL    AS09    20090511 MSFT 00000097)
[    0.000000] ACPI: FACP c7d90200 00084 (v01 051109 FACP1620 20090511 MSFT 00000097)
[    0.000000] ACPI: DSDT c7d905c0 05270 (v01  1ADXP 1ADXP005 00000005 INTL 20051117)
[    0.000000] ACPI: FACS c7d9e000 00040
[    0.000000] ACPI: APIC c7d90390 0006C (v01 051109 APIC1620 20090511 MSFT 00000097)
[    0.000000] ACPI: MCFG c7d90400 0003C (v01 051109 OEMMCFG  20090511 MSFT 00000097)
[    0.000000] ACPI: SLIC c7d90440 00176 (v01 DELL    AS09    20090511 MSFT 00000097)
[    0.000000] ACPI: OEMB c7d9e040 00072 (v01 051109 OEMB1620 20090511 MSFT 00000097)
[    0.000000] ACPI: HPET c7d985c0 00038 (v01 051109 OEMHPET  20090511 MSFT 00000097)
[    0.000000] ACPI: GSCI c7d9e0c0 02024 (v01 051109 GMCHSCI  20090511 MSFT 00000097)
[    0.000000] ACPI: SSDT c7da0b40 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2309MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00058000 - 0005ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 000173a868]    TEXT DATA BSS ==> [0001000000 - 000173a868]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [000173b000 - 00017420e0]              BRK ==> [000173b000 - 00017420e0]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [0000008000 - 0000057c28]      NEW RAMDISK ==> [0000008000 - 0000057c28]
[    0.000000]   #8 [0000058000 - 000005f000]          BOOTMAP ==> [0000058000 - 000005f000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000c7d90
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000c7d90
[    0.000000] On node 0 totalpages: 818475
[    0.000000] free_area_init_node: node 0, pgdat c161d180, node_mem_map c1743000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4620 pages used for memmap
[    0.000000]   HighMem zone: 586630 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages at c3053000, static data 28380 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 812079
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/2bfe816c-08ba-4962-9cb7-f54396fba685 ro i915.modeset=$
[    0.000000] Booting kernel: `$' invalid for parameter `i915.modeset'
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000c7d90)
[    0.000000] Memory: 3238556k/3274304k available (4067k kernel code, 34432k reserved, 2259k data, 360k init, 2365000k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1635000 - 0xc168f000   ( 360 kB)
[    0.000000]       .data : 0xc13f8d45 - 0xc162dc54   (2259 kB)
[    0.000000]       .text : 0xc1000000 - 0xc13f8d45   (4067 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2500.417 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] hpet clockevent registered
[    0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.83 BogoMIPS (lpj=2500417)
[    0.000999] Security Framework initialized
[    0.000999] SELinux:  Initializing.
[    0.000999] SELinux:  Starting in permissive mode
[    0.000999] Mount-cache hash table entries: 512
[    0.000999] Initializing cgroup subsys ns
[    0.000999] Initializing cgroup subsys cpuacct
[    0.000999] Initializing cgroup subsys freezer
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 2048K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 0
[    0.001006] mce: CPU supports 6 MCE banks
[    0.001077] CPU0: Thermal monitoring enabled (TM2)
[    0.001147] using mwait in idle threads.
[    0.001218] Checking 'hlt' instruction... OK.
[    0.005497] ACPI: Core revision 20090521
[    0.013352] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023669] CPU0: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
[    0.023996] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
[    0.023996] APIC delta adjusted to PM-Timer: 1250041 (1500036)
[    0.023996] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 5000.03 BogoMIPS (lpj=2500015)
[    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000999] CPU: L2 cache: 2048K
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.000999] mce: CPU supports 6 MCE banks
[    0.000999] CPU1: Thermal monitoring enabled (TM2)
[    0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.095333] CPU1: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
[    0.096138] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.097005] Brought up 2 CPUs
[    0.097071] Total of 2 processors activated (10000.86 BogoMIPS).
[    0.097241] khelper used greatest stack depth: 7008 bytes left
[    0.097241] Time:  1:48:58  Date: 07/23/09
[    0.098024] NET: Registered protocol family 16
[    0.098104] ACPI: bus type pci registered
[    0.099024] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.099079] PCI: Not using MMCONFIG.
[    0.099286] PCI: Using configuration type 1 for base access
[    0.104078] bio: create slab <bio-0> at 0
[    0.105433] ACPI: EC: Look up EC in DSDT
[    0.110878] ACPI: Interpreter enabled
[    0.110947] ACPI: (supports S0 S1 S3 S4 S5)
[    0.111111] ACPI: Using IOAPIC for interrupt routing
[    0.111220] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.112532] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.112606] PCI: Using MMCONFIG for extended config space
[    0.119204] ACPI: No dock devices found.
[    0.119522] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.119610] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
[    0.119610] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[    0.119610] pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]
[    0.119610] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe800000-0xfe8fffff]
[    0.119610] pci 0000:00:1a.0: reg 20 io port: [0xd880-0xd89f]
[    0.119610] pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f]
[    0.119610] pci 0000:00:1a.2: reg 20 io port: [0xd480-0xd49f]
[    0.120003] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe9fbc00-0xfe9fbfff]
[    0.120054] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.120128] pci 0000:00:1a.7: PME# disabled
[    0.120229] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9f4000-0xfe9f7fff]
[    0.120267] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.120340] pci 0000:00:1b.0: PME# disabled
[    0.120456] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.120529] pci 0000:00:1c.0: PME# disabled
[    0.120647] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.120720] pci 0000:00:1c.2: PME# disabled
[    0.120838] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.120911] pci 0000:00:1c.5: PME# disabled
[    0.121028] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[    0.121091] pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f]
[    0.121153] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
[    0.121219] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe9fb800-0xfe9fbbff]
[    0.121269] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.121343] pci 0000:00:1d.7: PME# disabled
[    0.121518] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.121631] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.121706] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.121865] pci 0000:00:1f.2: reg 10 io port: [0xcc00-0xcc07]
[    0.121870] pci 0000:00:1f.2: reg 14 io port: [0xc880-0xc883]
[    0.121876] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807]
[    0.121881] pci 0000:00:1f.2: reg 1c io port: [0xc480-0xc483]
[    0.121886] pci 0000:00:1f.2: reg 20 io port: [0xc400-0xc40f]
[    0.121891] pci 0000:00:1f.2: reg 24 io port: [0xc080-0xc08f]
[    0.121932] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe9fb400-0xfe9fb4ff]
[    0.121945] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.121986] pci 0000:00:1f.5: reg 10 io port: [0xbc00-0xbc07]
[    0.121991] pci 0000:00:1f.5: reg 14 io port: [0xb880-0xb883]
[    0.121996] pci 0000:00:1f.5: reg 18 io port: [0xb800-0xb807]
[    0.122001] pci 0000:00:1f.5: reg 1c io port: [0xb480-0xb483]
[    0.122007] pci 0000:00:1f.5: reg 20 io port: [0xb400-0xb40f]
[    0.122012] pci 0000:00:1f.5: reg 24 io port: [0xb080-0xb08f]
[    0.122123] pci 0000:02:00.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[    0.122134] pci 0000:02:00.0: reg 14 32bit mmio: [0xfeaff400-0xfeaff47f]
[    0.122160] pci 0000:02:00.0: reg 20 32bit mmio: [0xfeaff000-0xfeaff07f]
[    0.122170] pci 0000:02:00.0: reg 24 32bit mmio: [0xfeafec00-0xfeafec7f]
[    0.122262] pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.122308] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff]
[    0.122327] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[    0.122340] pci 0000:03:00.0: reg 20 64bit mmio: [0xfdff0000-0xfdffffff]
[    0.122347] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[    0.122384] pci 0000:03:00.0: supports D1 D2
[    0.122386] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.122461] pci 0000:03:00.0: PME# disabled
[    0.122575] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
[    0.122578] pci 0000:00:1c.5: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[    0.122583] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[    0.122626] pci 0000:00:1e.0: transparent bridge
[    0.122715] pci_bus 0000:00: on NUMA node 0
[    0.122719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.122839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.122909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.122958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.123005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.136416] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.137064] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.137272] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.137639] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.138035] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 6 7 10 11 12 14 15)
[    0.138403] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.138770] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.139137] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.139459] SCSI subsystem initialized
[    0.139459] libata version 3.00 loaded.
[    0.139459] usbcore: registered new interface driver usbfs
[    0.139995] usbcore: registered new interface driver hub
[    0.140058] usbcore: registered new device driver usb
[    0.140058] PCI: Using ACPI for IRQ routing
[    0.141988] NetLabel: Initializing
[    0.142061] NetLabel:  domain hash size = 128
[    0.142138] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.142214] NetLabel:  unlabeled traffic allowed by default
[    0.142291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.142291] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.148989] pnp: PnP ACPI init
[    0.149074] ACPI: bus type pnp registered
[    0.151016] pnp: PnP ACPI: found 12 devices
[    0.151083] ACPI: ACPI bus type pnp unregistered
[    0.151158] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.151232] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.151310] system 00:06: ioport range 0xa00-0xadf has been reserved
[    0.151385] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.151458] system 00:07: ioport range 0x800-0x87f has been reserved
[    0.151530] system 00:07: ioport range 0x500-0x57f could not be reserved
[    0.151604] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.151679] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.151753] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[    0.151830] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.151941] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.152021] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.152098] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.152171] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[    0.152245] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    0.152319] system 00:0b: iomem range 0x100000-0xc7dfffff could not be reserved
[    0.152430] system 00:0b: iomem range 0xfed90000-0xffffffff could not be reserved
[    0.187557] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.187628] pci 0000:00:1c.0:   IO window: disabled
[    0.187699] pci 0000:00:1c.0:   MEM window: disabled
[    0.187769] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.187841] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[    0.187911] pci 0000:00:1c.2:   IO window: disabled
[    0.187987] pci 0000:00:1c.2:   MEM window: 0xfea00000-0xfeafffff
[    0.188060] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.188131] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[    0.188203] pci 0000:00:1c.5:   IO window: 0xe000-0xefff
[    0.188276] pci 0000:00:1c.5:   MEM window: 0xfeb00000-0xfebfffff
[    0.188349] pci 0000:00:1c.5:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[    0.188463] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.188534] pci 0000:00:1e.0:   IO window: disabled
[    0.188605] pci 0000:00:1e.0:   MEM window: disabled
[    0.188675] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.188753]   alloc irq_desc for 17 on node -1
[    0.188755]   alloc kstat_irqs on node -1
[    0.188759] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.188835] pci 0000:00:1c.0: setting latency timer to 64
[    0.188841]   alloc irq_desc for 18 on node -1
[    0.188842]   alloc kstat_irqs on node -1
[    0.188845] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.188919] pci 0000:00:1c.2: setting latency timer to 64
[    0.188925]   alloc irq_desc for 16 on node -1
[    0.188926]   alloc kstat_irqs on node -1
[    0.188928] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.189006] pci 0000:00:1c.5: setting latency timer to 64
[    0.189011] pci 0000:00:1e.0: setting latency timer to 64
[    0.189015] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.189017] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.189019] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.189021] pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
[    0.189023] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.189025] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff]
[    0.189027] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.189029] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.189053] NET: Registered protocol family 2
[    0.189181] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.189475] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.189994] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.190247] TCP: Hash tables configured (established 131072 bind 65536)
[    0.190320] TCP reno registered
[    0.190447] NET: Registered protocol family 1
[    0.190568] Trying to unpack rootfs image as initramfs...
[    0.198910] Freeing initrd memory: 319k freed
[    0.199891] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
[    0.199967] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[    0.200083] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.200195] Scanning for low memory corruption every 60 seconds
[    0.200516] audit: initializing netlink socket (disabled)
[    0.200596] type=2000 audit(1248313738.199:1): initialized
[    0.211075] highmem bounce pool size: 64 pages
[    0.211145] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.213373] VFS: Disk quotas dquot_6.5.2
[    0.213501] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.215113] msgmni has been set to 1708
[    0.215331] SELinux:  Registering netfilter hooks
[    0.215615] alg: No test for stdrng (krng)
[    0.215762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.215874] io scheduler noop registered
[    0.215940] io scheduler anticipatory registered
[    0.216029] io scheduler deadline registered
[    0.216144] io scheduler cfq registered (default)
[    0.216222] pci 0000:00:02.0: Boot video device
[    0.216229] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
[    0.216230] pci 0000:00:1a.0: Performing full reset
[    0.216245] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
[    0.216246] pci 0000:00:1a.1: Performing full reset
[    0.216260] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
[    0.216262] pci 0000:00:1a.2: Performing full reset
[    0.216294] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[    0.216296] pci 0000:00:1d.0: Performing full reset
[    0.216310] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[    0.216311] pci 0000:00:1d.1: Performing full reset
[    0.216325] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[    0.216327] pci 0000:00:1d.2: Performing full reset
[    0.216465]   alloc irq_desc for 24 on node -1
[    0.216467]   alloc kstat_irqs on node -1
[    0.216475] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.216483] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.216641]   alloc irq_desc for 25 on node -1
[    0.216642]   alloc kstat_irqs on node -1
[    0.216648] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
[    0.216655] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.216812]   alloc irq_desc for 26 on node -1
[    0.216814]   alloc kstat_irqs on node -1
[    0.216819] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[    0.216826] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    0.217005] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.217294] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.217406] ACPI: Power Button [PWRF]
[    0.217539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.217653] ACPI: Power Button [PWRB]
[    0.218180] ACPI: SSDT c7da00f0 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.218694] ACPI: SSDT c7da05f0 004B2 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[    0.219078] Monitor-Mwait will be used to enter C-1 state
[    0.219096] Monitor-Mwait will be used to enter C-2 state
[    0.219101] Marking TSC unstable due to TSC halts in idle
[    0.219187] Switched to high resolution mode on CPU 0
[    0.219231] ACPI: CPU0 (power states:
[    0.219244] Switched to high resolution mode on CPU 1
[    0.219319]  C1[C1] C2[C2])
[    0.219458] processor LNXCPU:00: registered as cooling_device0
[    0.219872] ACPI: SSDT c7da0370 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
[    0.220261] ACPI: SSDT c7da0ab0 00085 (v01  PmRef  P002Cst 00003000 INTL 20051117)
[    0.220710] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    0.220872] processor LNXCPU:01: registered as cooling_device1
[    0.225193] Non-volatile memory driver v1.3
[    0.225341] Linux agpgart interface v0.103
[    0.225460] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[    0.226238] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[    0.228251] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.228416] [drm] Initialized drm 1.1.0 20060810
[    0.228534] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.228609] pci 0000:00:02.0: setting latency timer to 64
[    0.229701] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[    0.229819] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    0.229911]   alloc irq_desc for 27 on node -1
[    0.229913]   alloc kstat_irqs on node -1
[    0.229921] pci 0000:00:02.0: irq 27 for MSI/MSI-X
[    0.229934] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.230054] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.230372] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[    0.232342] brd: module loaded
[    0.233184] loop: module loaded
[    0.233492] ata_piix 0000:00:1f.2: version 2.13
[    0.233507]   alloc irq_desc for 19 on node -1
[    0.233509]   alloc kstat_irqs on node -1
[    0.233516] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.233593] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.233788] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.233833] scsi0 : ata_piix
[    0.234022] scsi1 : ata_piix
[    0.235264] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[    0.235340] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[    0.235429] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.235505] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.235696] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.235764] scsi2 : ata_piix
[    0.235918] scsi3 : ata_piix
[    0.236917] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[    0.236993] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[    0.237291] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[    0.237363] Copyright (c) 1999-2006 Intel Corporation.
[    0.237471] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    0.237541] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    0.237649] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.237721] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.237871] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.238676] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.238760] r8169 0000:03:00.0: setting latency timer to 64
[    0.238818]   alloc irq_desc for 28 on node -1
[    0.238819]   alloc kstat_irqs on node -1
[    0.238830] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    0.239041] eth0: RTL8168c/8111c at 0xf8056000, 00:21:70:4c:c3:ac, XID 3c4000c0 IRQ 28
[    0.241959] console [netcon0] enabled
[    0.242030] netconsole: network logging started
[    0.242228] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.242301] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[    0.242316] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.242397] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.242400] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.242485] drivers/usb/core/inode.c: creating file 'devices'
[    0.242488] drivers/usb/core/inode.c: creating file '001'
[    0.242531] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.242646] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[    0.242650] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[    0.242664] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.246546] ehci_hcd 0000:00:1a.7: debug port 1
[    0.246617] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.246618] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[    0.246629] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[    0.246701] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.250598] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[    0.257012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.257140] usb usb1: default language 0x0409
[    0.257146] usb usb1: udev 1, busnum 1, minor = 0
[    0.257148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.257221] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.257331] usb usb1: Product: EHCI Host Controller
[    0.257399] usb usb1: Manufacturer: Linux 2.6.31-rc3 ehci_hcd
[    0.257469] usb usb1: SerialNumber: 0000:00:1a.7
[    0.257564] usb usb1: uevent
[    0.257598] usb usb1: usb_probe_device
[    0.257600] usb usb1: configuration #1 chosen from 1 choice
[    0.257674] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    0.257686] usb 1-0:1.0: uevent
[    0.257718] hub 1-0:1.0: usb_probe_interface
[    0.257720] hub 1-0:1.0: usb_probe_interface - got id
[    0.257721] hub 1-0:1.0: USB hub found
[    0.257795] hub 1-0:1.0: 6 ports detected
[    0.257861] hub 1-0:1.0: standalone hub
[    0.257862] hub 1-0:1.0: no power switching (usb 1.0)
[    0.257864] hub 1-0:1.0: individual port over-current protection
[    0.257865] hub 1-0:1.0: power on to power good time: 20ms
[    0.257869] hub 1-0:1.0: local power source is good
[    0.257870] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    0.257894] drivers/usb/core/inode.c: creating file '001'
[    0.257917]   alloc irq_desc for 23 on node -1
[    0.257918]   alloc kstat_irqs on node -1
[    0.257922] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.258007] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.258010] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.258083] drivers/usb/core/inode.c: creating file '002'
[    0.258125] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.258243] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[    0.258247] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[    0.258262] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.262140] ehci_hcd 0000:00:1d.7: debug port 1
[    0.262211] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.262213] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    0.262222] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[    0.262294] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    0.266162] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[    0.273012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.273113] usb usb2: default language 0x0409
[    0.273123] usb usb2: udev 1, busnum 2, minor = 128
[    0.273127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.273211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.273322] usb usb2: Product: EHCI Host Controller
[    0.273390] usb usb2: Manufacturer: Linux 2.6.31-rc3 ehci_hcd
[    0.273460] usb usb2: SerialNumber: 0000:00:1d.7
[    0.273553] usb usb2: uevent
[    0.273589] usb usb2: usb_probe_device
[    0.273591] usb usb2: configuration #1 chosen from 1 choice
[    0.273664] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    0.273675] usb 2-0:1.0: uevent
[    0.273707] hub 2-0:1.0: usb_probe_interface
[    0.273709] hub 2-0:1.0: usb_probe_interface - got id
[    0.273710] hub 2-0:1.0: USB hub found
[    0.273779] hub 2-0:1.0: 6 ports detected
[    0.273844] hub 2-0:1.0: standalone hub
[    0.273846] hub 2-0:1.0: no power switching (usb 1.0)
[    0.273847] hub 2-0:1.0: individual port over-current protection
[    0.273849] hub 2-0:1.0: power on to power good time: 20ms
[    0.273852] hub 2-0:1.0: local power source is good
[    0.273853] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    0.273877] drivers/usb/core/inode.c: creating file '001'
[    0.273922] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.273994] ohci_hcd: block sizes: ed 64 td 64
[    0.274036] uhci_hcd: USB Universal Host Controller Interface driver
[    0.274130] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.274208] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.274210] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.274282] drivers/usb/core/inode.c: creating file '003'
[    0.274328] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.274442] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.274513] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[    0.274515] uhci_hcd 0000:00:1a.0: Performing full reset
[    0.274527] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[    0.274537] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[    0.274628] usb usb3: default language 0x0409
[    0.274633] usb usb3: udev 1, busnum 3, minor = 256
[    0.274634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.274708] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.274818] usb usb3: Product: UHCI Host Controller
[    0.274886] usb usb3: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[    0.274957] usb usb3: SerialNumber: 0000:00:1a.0
[    0.275058] usb usb3: uevent
[    0.275090] usb usb3: usb_probe_device
[    0.275092] usb usb3: configuration #1 chosen from 1 choice
[    0.275168] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    0.275179] usb 3-0:1.0: uevent
[    0.275210] hub 3-0:1.0: usb_probe_interface
[    0.275212] hub 3-0:1.0: usb_probe_interface - got id
[    0.275213] hub 3-0:1.0: USB hub found
[    0.275282] hub 3-0:1.0: 2 ports detected
[    0.275347] hub 3-0:1.0: standalone hub
[    0.275349] hub 3-0:1.0: no power switching (usb 1.0)
[    0.275350] hub 3-0:1.0: individual port over-current protection
[    0.275352] hub 3-0:1.0: power on to power good time: 2ms
[    0.275355] hub 3-0:1.0: local power source is good
[    0.275356] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    0.275368] drivers/usb/core/inode.c: creating file '001'
[    0.275391]   alloc irq_desc for 21 on node -1
[    0.275393]   alloc kstat_irqs on node -1
[    0.275396] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.275473] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.275476] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.275547] drivers/usb/core/inode.c: creating file '004'
[    0.275595] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.275710] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.275780] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[    0.275781] uhci_hcd 0000:00:1a.1: Performing full reset
[    0.275793] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[    0.275803] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[    0.275893] usb usb4: default language 0x0409
[    0.275899] usb usb4: udev 1, busnum 4, minor = 384
[    0.275900] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.275974] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.276095] usb usb4: Product: UHCI Host Controller
[    0.276166] usb usb4: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[    0.276237] usb usb4: SerialNumber: 0000:00:1a.1
[    0.276334] usb usb4: uevent
[    0.276364] usb usb4: usb_probe_device
[    0.276366] usb usb4: configuration #1 chosen from 1 choice
[    0.276439] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    0.276450] usb 4-0:1.0: uevent
[    0.276480] hub 4-0:1.0: usb_probe_interface
[    0.276482] hub 4-0:1.0: usb_probe_interface - got id
[    0.276483] hub 4-0:1.0: USB hub found
[    0.276552] hub 4-0:1.0: 2 ports detected
[    0.276618] hub 4-0:1.0: standalone hub
[    0.276619] hub 4-0:1.0: no power switching (usb 1.0)
[    0.276621] hub 4-0:1.0: individual port over-current protection
[    0.276622] hub 4-0:1.0: power on to power good time: 2ms
[    0.276625] hub 4-0:1.0: local power source is good
[    0.276627] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    0.276638] drivers/usb/core/inode.c: creating file '001'
[    0.276660] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[    0.276737] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.276740] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.276811] drivers/usb/core/inode.c: creating file '005'
[    0.276856] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.276970] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.277045] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[    0.277047] uhci_hcd 0000:00:1a.2: Performing full reset
[    0.277059] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[    0.277063] uhci_hcd 0000:00:1a.2: irq 21, io base 0x0000d480
[    0.277156] usb usb5: default language 0x0409
[    0.277162] usb usb5: udev 1, busnum 5, minor = 512
[    0.277163] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.277237] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.277347] usb usb5: Product: UHCI Host Controller
[    0.277415] usb usb5: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[    0.277486] usb usb5: SerialNumber: 0000:00:1a.2
[    0.277579] usb usb5: uevent
[    0.277611] usb usb5: usb_probe_device
[    0.277612] usb usb5: configuration #1 chosen from 1 choice
[    0.277685] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    0.277696] usb 5-0:1.0: uevent
[    0.277726] hub 5-0:1.0: usb_probe_interface
[    0.277728] hub 5-0:1.0: usb_probe_interface - got id
[    0.277729] hub 5-0:1.0: USB hub found
[    0.277797] hub 5-0:1.0: 2 ports detected
[    0.277863] hub 5-0:1.0: standalone hub
[    0.277864] hub 5-0:1.0: no power switching (usb 1.0)
[    0.277866] hub 5-0:1.0: individual port over-current protection
[    0.277867] hub 5-0:1.0: power on to power good time: 2ms
[    0.277870] hub 5-0:1.0: local power source is good
[    0.277872] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    0.277883] drivers/usb/core/inode.c: creating file '001'
[    0.277905] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.277982] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.277985] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.278062] drivers/usb/core/inode.c: creating file '006'
[    0.278107] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.278224] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.278295] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    0.278296] uhci_hcd 0000:00:1d.0: Performing full reset
[    0.278308] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    0.278312] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    0.278402] usb usb6: default language 0x0409
[    0.278407] usb usb6: udev 1, busnum 6, minor = 640
[    0.278409] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.278482] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.278593] usb usb6: Product: UHCI Host Controller
[    0.278661] usb usb6: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[    0.278731] usb usb6: SerialNumber: 0000:00:1d.0
[    0.278824] usb usb6: uevent
[    0.278856] usb usb6: usb_probe_device
[    0.278858] usb usb6: configuration #1 chosen from 1 choice
[    0.278930] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[    0.278941] usb 6-0:1.0: uevent
[    0.278973] hub 6-0:1.0: usb_probe_interface
[    0.278975] hub 6-0:1.0: usb_probe_interface - got id
[    0.278976] hub 6-0:1.0: USB hub found
[    0.279051] hub 6-0:1.0: 2 ports detected
[    0.279116] hub 6-0:1.0: standalone hub
[    0.279118] hub 6-0:1.0: no power switching (usb 1.0)
[    0.279119] hub 6-0:1.0: individual port over-current protection
[    0.279121] hub 6-0:1.0: power on to power good time: 2ms
[    0.279124] hub 6-0:1.0: local power source is good
[    0.279125] hub 6-0:1.0: trying to enable port power on non-switchable hub
[    0.279136] drivers/usb/core/inode.c: creating file '001'
[    0.279160]   alloc irq_desc for 20 on node -1
[    0.279162]   alloc kstat_irqs on node -1
[    0.279165] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.279241] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.279244] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.279316] drivers/usb/core/inode.c: creating file '007'
[    0.279359] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.279474] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.279544] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    0.279546] uhci_hcd 0000:00:1d.1: Performing full reset
[    0.279558] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[    0.279568] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000d080
[    0.279661] usb usb7: default language 0x0409
[    0.279666] usb usb7: udev 1, busnum 7, minor = 768
[    0.279668] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.279741] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.279851] usb usb7: Product: UHCI Host Controller
[    0.279920] usb usb7: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[    0.279990] usb usb7: SerialNumber: 0000:00:1d.1
[    0.280088] usb usb7: uevent
[    0.280120] usb usb7: usb_probe_device
[    0.280122] usb usb7: configuration #1 chosen from 1 choice
[    0.280198] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[    0.280208] usb 7-0:1.0: uevent
[    0.280239] hub 7-0:1.0: usb_probe_interface
[    0.280240] hub 7-0:1.0: usb_probe_interface - got id
[    0.280242] hub 7-0:1.0: USB hub found
[    0.280310] hub 7-0:1.0: 2 ports detected
[    0.280376] hub 7-0:1.0: standalone hub
[    0.280377] hub 7-0:1.0: no power switching (usb 1.0)
[    0.280378] hub 7-0:1.0: individual port over-current protection
[    0.280380] hub 7-0:1.0: power on to power good time: 2ms
[    0.280383] hub 7-0:1.0: local power source is good
[    0.280385] hub 7-0:1.0: trying to enable port power on non-switchable hub
[    0.280397] drivers/usb/core/inode.c: creating file '001'
[    0.280421] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.280497] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.280500] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.280571] drivers/usb/core/inode.c: creating file '008'
[    0.280617] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.280732] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.280802] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    0.280804] uhci_hcd 0000:00:1d.2: Performing full reset
[    0.280816] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[    0.280820] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[    0.280910] usb usb8: default language 0x0409
[    0.280915] usb usb8: udev 1, busnum 8, minor = 896
[    0.280917] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.280991] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.281107] usb usb8: Product: UHCI Host Controller
[    0.281178] usb usb8: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[    0.281249] usb usb8: SerialNumber: 0000:00:1d.2
[    0.281341] usb usb8: uevent
[    0.281371] usb usb8: usb_probe_device
[    0.281373] usb usb8: configuration #1 chosen from 1 choice
[    0.281446] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[    0.281459] usb 8-0:1.0: uevent
[    0.281490] hub 8-0:1.0: usb_probe_interface
[    0.281492] hub 8-0:1.0: usb_probe_interface - got id
[    0.281493] hub 8-0:1.0: USB hub found
[    0.281561] hub 8-0:1.0: 2 ports detected
[    0.281627] hub 8-0:1.0: standalone hub
[    0.281628] hub 8-0:1.0: no power switching (usb 1.0)
[    0.281630] hub 8-0:1.0: individual port over-current protection
[    0.281631] hub 8-0:1.0: power on to power good time: 2ms
[    0.281634] hub 8-0:1.0: local power source is good
[    0.281636] hub 8-0:1.0: trying to enable port power on non-switchable hub
[    0.281647] drivers/usb/core/inode.c: creating file '001'
[    0.281732] usbcore: registered new interface driver usblp
[    0.281803] Initializing USB Mass Storage driver...
[    0.281923] usbcore: registered new interface driver usb-storage
[    0.281994] USB Mass Storage support registered.
[    0.282120] usbcore: registered new interface driver libusual
[    0.282328] PNP: No PS/2 controller found. Probing ports directly.
[    0.282472] Platform driver 'i8042' needs updating - please use dev_pm_ops
[    0.284556] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.284628] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.284763] mice: PS/2 mouse device common for all mice
[    0.285052] rtc_cmos 00:03: RTC can wake from S4
[    0.285173] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.285264] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.285384] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.285804] cpuidle: using governor ladder
[    0.286260] cpuidle: using governor menu
[    0.287453] usbcore: registered new interface driver hiddev
[    0.287566] usbcore: registered new interface driver usbhid
[    0.287637] usbhid: v2.6:USB HID core driver
[    0.287754] Advanced Linux Sound Architecture Driver Version 1.0.20.
[    0.288623]   alloc irq_desc for 22 on node -1
[    0.288625]   alloc kstat_irqs on node -1
[    0.288630] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.288764] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    0.323151] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS...
[    0.349167] ALSA device list:
[    0.349232]   #0: HDA Intel at 0xfe9f4000 irq 22
[    0.349342] Netfilter messages via NETLINK v0.30.
[    0.349423] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.349691] ctnetlink v0.93: registering with nfnetlink.
[    0.350269] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.350355] TCP cubic registered
[    0.350419] Initializing XFRM netlink socket
[    0.350750] NET: Registered protocol family 10
[    0.351626] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.351743] IPv6 over IPv4 tunneling driver
[    0.352343] NET: Registered protocol family 17
[    0.352574] RPC: Registered udp transport module.
[    0.352643] RPC: Registered tcp transport module.
[    0.353209] Using IPI No-Shortcut mode
[    0.353411] PM: Resume from disk failed.
[    0.353421] registered taskstats version 1
[    0.353599]   Magic number: 1:624:812
[    0.358040] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT
[    0.358046] hub 1-0:1.0: port 5: status 0501 change 0001
[    0.358057] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
[    0.358062] hub 1-0:1.0: port 6: status 0501 change 0001
[    0.374029] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
[    0.374035] hub 2-0:1.0: port 3: status 0501 change 0001
[    0.375042] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.376038] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.377024] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00
[    0.377039] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00
[    0.379045] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.380024] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00
[    0.381038] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    0.457032] hub 1-0:1.0: state 7 ports 6 chg 0060 evt 0000
[    0.457042] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[    0.457052] ehci_hcd 0000:00:1a.7: port 5 low speed --> companion
[    0.508038] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
[    0.508061] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[    0.508068] ehci_hcd 0000:00:1a.7: port 6 low speed --> companion
[    0.554696] ata4: SATA link down (SStatus 0 SControl 300)
[    0.565439] ata3: SATA link down (SStatus 0 SControl 300)
[    0.565443] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
[    0.565458] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[    0.565462] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000
[    0.565466] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[    0.616313] ehci_hcd 0000:00:1d.7: port 3 high speed
[    0.616316] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[    0.667031] usb 2-3: new high speed USB device using ehci_hcd and address 2
[    0.996080] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.996174] ata1.01: SATA link down (SStatus 0 SControl 300)
[    0.996408] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.996491] ata2.01: SATA link down (SStatus 0 SControl 300)
[    0.999393] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH30N, A102, max UDMA/100
[    1.006236] ata2.00: configured for UDMA/100
[    1.027761] ata1.00: ATA-8: ST3320613AS, DE13, max UDMA/133
[    1.027844] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.076657] ata1.00: configured for UDMA/133
[    1.076824] scsi 0:0:0:0: Direct-Access     ATA      ST3320613AS      DE13 PQ: 0 ANSI: 5
[    1.077154] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.077302] sd 0:0:0:0: [sda] Write Protect is off
[    1.077372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.077388] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.077595]  sda:
[    1.077711] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.079114] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GH30N    A102 PQ: 0 ANSI: 5
[    1.082929] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.083071] Uniform CD-ROM driver Revision: 3.20
[    1.083259] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.083348] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.110395]  sda1 sda2 sda3 sda4
[    1.146562] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.146653] Freeing unused kernel memory: 360k freed
[    1.146897] Write protecting the kernel text: 4068k
[    1.147012] Write protecting the kernel read-only data: 1788k
[    1.163338] usb usb3: uevent
[    1.163353] usb 3-0:1.0: uevent
[    1.163393] usb usb4: uevent
[    1.163407] usb 4-0:1.0: uevent
[    1.163446] usb usb5: uevent
[    1.163461] usb 5-0:1.0: uevent
[    1.163500] usb usb1: uevent
[    1.163516] usb 1-0:1.0: uevent
[    1.163907] usb usb6: uevent
[    1.163921] usb 6-0:1.0: uevent
[    1.163960] usb usb7: uevent
[    1.163974] usb 7-0:1.0: uevent
[    1.164023] usb usb8: uevent
[    1.164038] usb 8-0:1.0: uevent
[    1.164077] usb usb2: uevent
[    1.164093] usb 2-0:1.0: uevent
[    1.211050] udevd used greatest stack depth: 6500 bytes left
[    1.228441] ehci_hcd 0000:00:1d.7: port 3 high speed
[    1.228446] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[    1.353710] usb 2-3: default language 0x0409
[    1.359211] usb 2-3: udev 2, busnum 2, minor = 129
[    1.359215] usb 2-3: New USB device found, idVendor=0bda, idProduct=0151
[    1.359303] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.359387] usb 2-3: Product: USB2.0-CRW
[    1.359454] usb 2-3: Manufacturer: Generic
[    1.359521] usb 2-3: SerialNumber: 20060413092100000
[    1.359649] usb 2-3: uevent
[    1.359664] usb 2-3: usb_probe_device
[    1.359667] usb 2-3: configuration #1 chosen from 1 choice
[    1.360334] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
[    1.361084] usb 2-3:1.0: uevent
[    1.361113] usb-storage 2-3:1.0: usb_probe_interface
[    1.361121] usb-storage 2-3:1.0: usb_probe_interface - got id
[    1.361366] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.361804] usb-storage: device found at 2
[    1.361805] usb-storage: waiting for device to settle before scanning
[    1.361822] drivers/usb/core/inode.c: creating file '002'
[    1.361839] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
[    1.361846] uhci_hcd 0000:00:1a.2: port 1 portsc 01a3,00
[    1.361852] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[    1.454030] usb usb3: suspend_rh (auto-stop)
[    1.454053] usb usb4: suspend_rh (auto-stop)
[    1.454074] usb usb6: suspend_rh (auto-stop)
[    1.454096] usb usb8: suspend_rh (auto-stop)
[    1.454126] usb usb7: suspend_rh (auto-stop)
[    1.465036] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[    1.567031] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    1.642488] kjournald starting.  Commit interval 5 seconds
[    1.642508] EXT3-fs: mounted filesystem with writeback data mode.
[    1.737182] usb 5-1: skipped 1 descriptor after interface
[    1.737187] usb 5-1: skipped 1 descriptor after interface
[    1.743174] usb 5-1: default language 0x0409
[    1.767176] usb 5-1: udev 2, busnum 5, minor = 513
[    1.767180] usb 5-1: New USB device found, idVendor=0d62, idProduct=2106
[    1.767264] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.767348] usb 5-1: Product: USB Multimedia Keyboard
[    1.767472] usb 5-1: uevent
[    1.767484] usb 5-1: usb_probe_device
[    1.767486] usb 5-1: configuration #1 chosen from 1 choice
[    1.770181] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[    1.770210] usb 5-1:1.0: uevent
[    1.770242] usbhid 5-1:1.0: usb_probe_interface
[    1.770245] usbhid 5-1:1.0: usb_probe_interface - got id
[    1.801438] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
[    1.801564] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[    1.801601] generic-usb 0003:0D62:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Multimedia Keyboard] on usb-0000:00:1a.2-1/input0
[    1.801733] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
[    1.801746] usb 5-1:1.1: uevent
[    1.801760] usbhid 5-1:1.1: usb_probe_interface
[    1.801762] usbhid 5-1:1.1: usb_probe_interface - got id
[    1.841258] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
[    1.841390] uhci_hcd 0000:00:1a.2: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
[    1.841422] generic-usb 0003:0D62:2106.0002: input,hidraw1: USB HID v1.10 Device [USB Multimedia Keyboard] on usb-0000:00:1a.2-1/input1
[    1.841554] drivers/usb/core/inode.c: creating file '002'
[    1.841572] uhci_hcd 0000:00:1a.2: port 2 portsc 01a3,00
[    1.841577] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[    1.945036] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[    2.047029] usb 5-2: new low speed USB device using uhci_hcd and address 3
[    2.083045] async/1 used greatest stack depth: 6492 bytes left
[    2.180038] stty used greatest stack depth: 6236 bytes left
[    2.188180] usb 5-2: skipped 1 descriptor after interface
[    2.193173] usb 5-2: default language 0x0409
[    2.208177] usb 5-2: udev 3, busnum 5, minor = 514
[    2.208182] usb 5-2: New USB device found, idVendor=413c, idProduct=3012
[    2.208267] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.208350] usb 5-2: Product: Dell USB Optical Mouse
[    2.208419] usb 5-2: Manufacturer: Dell
[    2.208538] usb 5-2: uevent
[    2.208550] usb 5-2: usb_probe_device
[    2.208552] usb 5-2: configuration #1 chosen from 1 choice
[    2.211177] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[    2.211202] usb 5-2:1.0: uevent
[    2.211231] usbhid 5-2:1.0: usb_probe_interface
[    2.211235] usbhid 5-2:1.0: usb_probe_interface - got id
[    2.224392] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input4
[    2.224561] generic-usb 0003:413C:3012.0003: input,hidraw2: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.2-2/input0
[    2.224694] drivers/usb/core/inode.c: creating file '003'
[    2.224710] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    2.224714] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    2.701039] hub 3-0:1.0: hub_suspend
[    2.701049] usb usb3: bus auto-suspend
[    2.701053] usb usb3: suspend_rh
[    2.701070] hub 4-0:1.0: hub_suspend
[    2.701074] usb usb4: bus auto-suspend
[    2.701077] usb usb4: suspend_rh
[    2.701093] hub 6-0:1.0: hub_suspend
[    2.701098] usb usb6: bus auto-suspend
[    2.701101] usb usb6: suspend_rh
[    2.701116] hub 8-0:1.0: hub_suspend
[    2.701120] usb usb8: bus auto-suspend
[    2.701123] usb usb8: suspend_rh
[    2.701146] hub 1-0:1.0: hub_suspend
[    2.701149] usb usb1: bus auto-suspend
[    2.701151] ehci_hcd 0000:00:1a.7: suspend root hub
[    3.645823] udevd used greatest stack depth: 6192 bytes left
[    3.645847] udev: starting version 141
[    3.662914] usb usb3: uevent
[    3.662931] usb 3-0:1.0: uevent
[    3.662975] usb usb4: uevent
[    3.662989] usb 4-0:1.0: uevent
[    3.663048] usb usb5: uevent
[    3.663062] usb 5-0:1.0: uevent
[    3.663080] usb 5-1: uevent
[    3.663095] usb 5-1:1.0: uevent
[    3.663191] usb 5-1:1.1: uevent
[    3.663276] usb 5-2: uevent
[    3.663291] usb 5-2:1.0: uevent
[    3.663408] usb usb1: uevent
[    3.663423] usb 1-0:1.0: uevent
[    3.663822] usb usb6: uevent
[    3.663836] usb 6-0:1.0: uevent
[    3.663875] usb usb7: uevent
[    3.663889] usb 7-0:1.0: uevent
[    3.663931] usb usb8: uevent
[    3.663945] usb 8-0:1.0: uevent
[    3.663985] usb usb2: uevent
[    3.664018] usb 2-0:1.0: uevent
[    3.664037] usb 2-3: uevent
[    3.664052] usb 2-3:1.0: uevent
[    3.767241] scsi_id used greatest stack depth: 5984 bytes left
[    4.216317] usb 5-2:1.0: uevent
[    4.216402] usb 5-2: uevent
[    4.217115] usb 5-2:1.0: uevent
[    4.217206] usb 5-2: uevent
[    4.221545] usb 5-1:1.0: uevent
[    4.221632] usb 5-1: uevent
[    4.222617] usb 5-1:1.1: uevent
[    4.222699] usb 5-1: uevent
[    4.701152] hub 7-0:1.0: hub_suspend
[    4.701158] usb usb7: bus auto-suspend
[    4.701160] usb usb7: suspend_rh
[    4.730192] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[    4.756083] EXT3 FS on sda3, internal journal
[    4.880196] EXT4-fs (sda2): barriers enabled
[    4.890826] kjournald2 starting: pid 3021, dev sda2:8, commit interval 5 seconds
[    4.890840] EXT4-fs (sda2): delayed allocation enabled
[    4.890845] EXT4-fs: file extents enabled
[    4.902943] EXT4-fs: mballoc enabled
[    4.902956] EXT4-fs (sda2): mounted filesystem with ordered data mode
[    4.922371] Adding 8426084k swap on /dev/sda4.  Priority:-1 extents:1 across:8426084k 
[    6.367478] scsi 4:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    6.367599] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.367769] usb-storage: device scan complete
[    6.370841] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    6.371383] usb 2-3:1.0: uevent
[    6.371478] usb 2-3: uevent
[    9.712352] usb usb3: uevent
[    9.712415] usb 3-0:1.0: uevent
[    9.712532] usb usb4: uevent
[    9.712796] usb 4-0:1.0: uevent
[    9.712909] usb usb5: uevent
[    9.712955] usb 5-0:1.0: uevent
[    9.712997] usb 5-1: uevent
[    9.713060] usb 5-1:1.0: uevent
[    9.713325] usb 5-1:1.1: uevent
[    9.713562] usb 5-2: uevent
[    9.713611] usb 5-2:1.0: uevent
[    9.714018] usb usb1: uevent
[    9.714067] usb 1-0:1.0: uevent
[    9.715210] usb usb6: uevent
[    9.715258] usb 6-0:1.0: uevent
[    9.715384] usb usb7: uevent
[    9.715432] usb 7-0:1.0: uevent
[    9.715545] usb usb8: uevent
[    9.715592] usb 8-0:1.0: uevent
[    9.715704] usb usb2: uevent
[    9.715751] usb 2-0:1.0: uevent
[    9.715792] usb 2-3: uevent
[    9.715841] usb 2-3:1.0: uevent
[   10.324861] r8169: eth0: link up
[   10.324866] r8169: eth0: link up
[   12.681063] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18040300
[   13.345036] uhci_hcd 0000:00:1a.2: reserve dev 3 ep81-INT, period 8, phase 4, 99 us
[   21.099012] eth0: no IPv6 routers present
[   24.856272] kbuildsycoca4 used greatest stack depth: 5932 bytes left
[  647.863666] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  647.885671] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  648.260648] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  656.139414] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  656.204819] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  656.947160] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  660.352317] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  660.357268] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  660.361393] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  660.363695] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  660.368054] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  660.370975] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  660.374293] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  660.396250] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  675.657325] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  675.824246] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  675.871964] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  676.467500] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  676.485221] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  676.508445] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  677.686706] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  677.731035] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  678.128193] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  678.212792] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  678.887924] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  678.980665] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  678.982497] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  679.238602] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  679.241093] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  681.611027] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  682.473950] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  682.493363] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  682.510793] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  683.167314] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  683.169524] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  683.327292] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  683.464032] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  683.517369] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  683.524216] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  683.742244] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  684.194065] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  684.195705] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  684.427169] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  684.759288] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  684.918269] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  684.933086] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  684.934791] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  684.936825] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  685.065607] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  685.076453] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  685.536887] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  685.692553] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  687.879713] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  687.981080] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  688.004782] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  688.575674] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  688.604505] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  688.832754] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  688.834547] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  688.837744] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  688.928431] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  688.931023] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.073285] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.396707] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.399360] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.423194] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.475548] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  689.481255] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.485468] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.490422] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.494559] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  689.617688] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  690.013301] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  690.126736] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  690.324112] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  690.404508] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  690.408701] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  690.886157] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  690.968433] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.218419] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.224472] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.231118] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.233029] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.250880] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.253499] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.256401] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.263500] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.267485] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.271893] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.275512] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.361010] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  691.572444] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.575114] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.603741] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.631105] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.713413] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  691.729269] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.737771] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  691.740330] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.748603] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.751137] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  691.753316] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.762086] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.765936] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.767952] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.772001] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.773590] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.773895] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  691.775020] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  691.778892] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.782003] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.811378] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.835917] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.836980] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  691.842113] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  691.845760] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.135159] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.180229] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.272932] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.420974] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.459281] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.473393] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.834610] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  692.898867] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  692.900855] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  693.555056] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  694.036736] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  694.038886] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  694.044803] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  694.047507] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  694.050457] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  694.053374] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  694.072999] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  694.095058] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  694.116814] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  694.322999] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  694.356875] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  694.363456] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  694.364733] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  694.856074] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  695.131046] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  695.860581] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  695.975725] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  695.977936] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  696.188775] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  696.585293] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  696.596346] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  696.600958] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  696.604774] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  696.786745] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  696.805615] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  696.827006] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  697.216062] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  697.675391] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  697.677993] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  697.681003] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  697.692645] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  697.695763] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  697.766158] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  697.768656] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  697.771024] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  697.772421] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  697.777719] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  697.818274] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  698.020908] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  698.156274] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  698.217320] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  698.223086] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  698.225867] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  698.238880] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x18200300
[  698.312466] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  698.315852] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  698.936984] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  699.112996] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300
[  699.121130] [drm:i915_driver_irq_handler] *ERROR* hotplug event received, stat 0x10200300

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Thursday 23 July 2009 02:06:36 Alberto Gonzalez wrote:
> > On Wednesday 22 July 2009 21:44:36 Jesse Barnes wrote:
> > > Hm, so this type of interrupt problem is *supposed* to be handled by
> > > setting of the PEG_BAND_GAP_DATA reg (low bits set to 0xd).  Do you
> > > have that in your tree?  Does git master have this problem?
>
> I've tested 2.6.31 from git and I can reproduce the problem. Attached is
> the dmesg with the debug patch applied.
>
> > > Maybe we need to add a patch to 2.6.30.x to set PEG_BAND_GAP_DATA as a
> > > workaround (git master already has code to do this properly for HDMI
> > > and DP outputs afaict).

Hi,

No updates here? I was wondering if it would be more useful to open a bug 
report so that it doesn't get lost. It is a rather nasty bug that keeps me 
using .29 kernel, and since it seems to be clear where the problem is it seems 
a pity to let it go...

Regards,
Alberto.

Re: Kernel 2.6.30 and udevd problem

[Jesse Barnes]

On Thu, 6 Aug 2009 15:53:23 +0200
Alberto Gonzalez <alberto6674@gmail.com> wrote:

> On Thursday 23 July 2009 02:06:36 Alberto Gonzalez wrote:
> > > On Wednesday 22 July 2009 21:44:36 Jesse Barnes wrote:
> > > > Hm, so this type of interrupt problem is *supposed* to be
> > > > handled by setting of the PEG_BAND_GAP_DATA reg (low bits set
> > > > to 0xd).  Do you have that in your tree?  Does git master have
> > > > this problem?
> >
> > I've tested 2.6.31 from git and I can reproduce the problem.
> > Attached is the dmesg with the debug patch applied.
> >
> > > > Maybe we need to add a patch to 2.6.30.x to set
> > > > PEG_BAND_GAP_DATA as a workaround (git master already has code
> > > > to do this properly for HDMI and DP outputs afaict).
> 
> Hi,
> 
> No updates here? I was wondering if it would be more useful to open a
> bug report so that it doesn't get lost. It is a rather nasty bug that
> keeps me using .29 kernel, and since it seems to be clear where the
> problem is it seems a pity to let it go...

Yeah, sorry was on vacation.  A bug report would be great, can you
file one at bugs.freedesktop.org against drm/intel?  I think I know
where the issue might be, but I'll have to come up with some more test
patches for you.

-- 
Jesse Barnes, Intel Open Source Technology Center

Re: Kernel 2.6.30 and udevd problem

[Alberto Gonzalez]

On Thursday 06 August 2009 23:30:12 Jesse Barnes wrote:
> > Hi,
> >
> > No updates here? I was wondering if it would be more useful to open a
> > bug report so that it doesn't get lost. It is a rather nasty bug that
> > keeps me using .29 kernel, and since it seems to be clear where the
> > problem is it seems a pity to let it go...
>
> Yeah, sorry was on vacation.  A bug report would be great, can you
> file one at bugs.freedesktop.org against drm/intel?  I think I know
> where the issue might be, but I'll have to come up with some more test
> patches for you.

Fine, I'd be glad to test any patch (though I will be away the next week on 
vacation too).

Here is the bug report:
http://bugs.freedesktop.org/show_bug.cgi?id#183

Regards,
Alberto.