From: Andreas Radke <a.radke@arcor.de>
To: linux-hotplug@vger.kernel.org
Subject: Re: group is not set properly for usb printer for older kernels
Date: Thu, 08 Oct 2009 18:19:03 +0000 [thread overview]
Message-ID: <20091008201903.5ce0e0bb@workstation64.home> (raw)
In-Reply-To: <20091008191201.19276c15@workstation64.home>
should be this:
[root@server64 andyrtr]# ls -1hR /dev/.udev/names/usbdev4.5
/dev/.udev/names/usbdev4.5:
\x2fdevices\x2fpci0000:00\x2f0000:00:04.0\x2fusb4\x2f4-2\x2fusb_device\x2fusbdev4.5
udevadm monitor -e --udev shows this:
UDEV [1255025639.950847] add /devices/pci0000:00/0000:00:04.0/usb4/4-2 (usb)
UDEV_LOG=0
ACTIONd
DEVPATH=/devices/pci0000:00/0000:00:04.0/usb4/4-2
SUBSYSTEM=usb
DEVTYPE=usb_device
DEVICE=/proc/bus/usb/004/005
PRODUCTCd/c/100
TYPE=0/0/0
BUSNUM\04
DEVNUM\05
SEQNUM\x1919
ID_VENDOR=Lexmark_International__Inc.
ID_VENDOR_ENC=Lexmark\x20International\x2c\x20Inc.
ID_VENDOR_ID\x043d
ID_MODEL=Lexmark_Optra_E312
ID_MODEL_ENC=Lexmark\x20Optra\x20E312
ID_MODEL_ID\00c
ID_REVISION\x0100
ID_SERIAL=Lexmark_International__Inc._Lexmark_Optra_E312_8050926
ID_SERIAL_SHORT€50926
ID_BUS=usb
ID_USB_INTERFACES=:070102:
DEVNAME=/dev/bus/usb/004/005
MAJOR\x189
MINOR88
DEVLINKS=/dev/char/189:388
UDEV [1255025639.952481] add /devices/pci0000:00/0000:00:04.0/usb4/4-2/usb_endpoint/usbdev4.5_ep00 (usb_endpoint)
UDEV_LOG=0
ACTIONd
DEVPATH=/devices/pci0000:00/0000:00:04.0/usb4/4-2/usb_endpoint/usbdev4.5_ep00
SUBSYSTEM=usb_endpoint
SEQNUM\x1924
DEVNAME=/dev/usbdev4.5_ep00
MAJOR%3
MINOR\x10
DEVLINKS=/dev/char/253:10
UDEV [1255025639.959575] add /devices/pci0000:00/0000:00:04.0/usb4/4-2/usb_device/usbdev4.5 (usb_device)
UDEV_LOG=0
ACTIONd
DEVPATH=/devices/pci0000:00/0000:00:04.0/usb4/4-2/usb_device/usbdev4.5
SUBSYSTEM=usb_device
SEQNUM\x1923
DEVNAME=/dev/usbdev4.5
MAJOR\x189
MINOR88
DEVLINKS=/dev/char/189:388
UDEV [1255025639.986799] add /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0 (usb)
UDEV_LOG=0
ACTIONd
DEVPATH=/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0
SUBSYSTEM=usb
DEVTYPE=usb_interface
DEVICE=/proc/bus/usb/004/005
PRODUCTCd/c/100
TYPE=0/0/0
INTERFACE=7/1/2
MODALIAS=usb:v043Dp000Cd0100dc00dsc00dp00ic07isc01ip02
SEQNUM\x1920
UDEV [1255025639.987745] add /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/usb_endpoint/usbdev4.5_ep81 (usb_endpoint)
UDEV_LOG=0
ACTIONd
DEVPATH=/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/usb_endpoint/usbdev4.5_ep81
SUBSYSTEM=usb_endpoint
SEQNUM\x1922
DEVNAME=/dev/usbdev4.5_ep81
MAJOR%3
MINOR=9
DEVLINKS=/dev/char/253:9
UDEV [1255025639.987812] add /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/usb_endpoint/usbdev4.5_ep01 (usb_endpoint)
UDEV_LOG=0
ACTIONd
DEVPATH=/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/usb_endpoint/usbdev4.5_ep01
SUBSYSTEM=usb_endpoint
SEQNUM\x1921
DEVNAME=/dev/usbdev4.5_ep01
MAJOR%3
MINOR=8
DEVLINKS=/dev/char/253:8
[root@server64 andyrtr]# ls -lhR /dev/bus/usb/004/005
crw-rw-r-- 1 root root 189, 388 8. Okt 20:13 /dev/bus/usb/004/005
...
Andy
next prev parent reply other threads:[~2009-10-08 18:19 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-08 17:12 group is not set properly for usb printer for older kernels Andreas Radke
2009-10-08 17:26 ` Kay Sievers
2009-10-08 18:19 ` Andreas Radke [this message]
2009-10-08 18:24 ` Kay Sievers
2009-10-08 18:33 ` Andreas Radke
2009-10-08 19:05 ` Kay Sievers
2009-10-08 20:11 ` Andreas Radke
2009-10-08 22:38 ` Kay Sievers
2009-10-09 3:36 ` Andreas Radke
2009-10-09 9:29 ` Kay Sievers
2009-10-09 10:33 ` Andreas Radke
2009-10-11 18:48 ` Andreas Radke
2009-10-13 3:30 ` Evangelos Foutras
2009-10-13 8:22 ` Kay Sievers
2009-10-15 13:28 ` Andreas Radke
2009-10-15 14:33 ` Evangelos Foutras
2009-10-20 8:05 ` Matthias Schwarzott
2009-10-20 11:59 ` Evangelos Foutras
2009-10-20 12:07 ` Matthias Schwarzott
2009-10-20 19:11 ` Kay Sievers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091008201903.5ce0e0bb@workstation64.home \
--to=a.radke@arcor.de \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).