USB-Stick

[Winfried Hoena <winfried_hoena@t-online.de>]

[-- Attachment #1: Type: Text/Plain, Size: 1042 bytes --]

Am Freitag, 12. März 2010 15:25:29 schrieben Sie:
> On Fri, Mar 12, 2010 at 12:55:35PM +0100, Winfried Hoena wrote:
> > Hallo,
> >
> > my problem: any USB-sticks are unusable because they are not mounted and
> > in /var/log/messages are found many read-errors from that sticks.
> > What means the following in the output from lsusb -v:
> >
> > "can't get device qualifier: Numerical result out of range"
> 
> Odd.  Can you provide the full kernel log for when you plug the device
> in?  Do the following as root from a console:
> 	dmesg -c         # this clears out the log
> 	plug the device in
> 	dmesg > my_log
> 
> then email us the my_log file.
> 
> thanks,
> 
> greg k-h
> 
Hi,

my usb-stick doesn't work not yet! The kernel is 2.6.31.12-0.2-default x86_64 
from openSUSE and I think there is a problem with the usb-subsystem.
A linux livesystem works properly with this usb-stick on the same computer, so 
I think the hardware is ok.

Please help me to prevent lost of data.

Thank You

Winfried Höna

[-- Attachment #2: my_log --]
[-- Type: text/plain, Size: 4615 bytes --]

[21456.200069] #
[21471.188038] usb 1-7: new high speed USB device using ehci_hcd and address 17
[21471.322791] usb 1-7: New USB device found, idVendor=13fe, idProduct=1d00
[21471.322819] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[21471.322833] usb 1-7: Product: Flash Disk      
[21471.322843] usb 1-7: Manufacturer: USB     
[21471.322853] usb 1-7: SerialNumber: 90711C0025DF
[21471.323055] usb 1-7: configuration #1 chosen from 1 choice
[21471.326949] scsi11 : SCSI emulation for USB Mass Storage devices
[21471.328329] usb-storage: device found at 17
[21471.328335] usb-storage: waiting for device to settle before scanning
[21472.328915] scsi 11:0:0:0: Direct-Access     USB      Flash Disk       V1.1 PQ: 0 ANSI: 0 CCS
[21472.329349] sd 11:0:0:0: Attached scsi generic sg6 type 0
[21472.781000] usb-storage: device scan complete
[21472.781624] sd 11:0:0:0: [sdd] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[21472.782117] sd 11:0:0:0: [sdd] Write Protect is off
[21472.782133] sd 11:0:0:0: [sdd] Mode Sense: 23 00 00 00
[21472.782138] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[21472.960031] usb 1-7: reset high speed USB device using ehci_hcd and address 17
[21473.102599] usb 1-7: device firmware changed
[21473.103040] sd 11:0:0:0: [sdd] READ CAPACITY failed
[21473.103055] sd 11:0:0:0: [sdd] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[21473.103070] sd 11:0:0:0: [sdd] Sense not available.
[21473.103158] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[21473.103175] sdd: detected capacity change from 1031798784 to 0
[21473.103728] sd 11:0:0:0: [sdd] READ CAPACITY failed
[21473.103744] sd 11:0:0:0: [sdd] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[21473.103759] sd 11:0:0:0: [sdd] Sense not available.
[21473.103844] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[21473.103859] sd 11:0:0:0: [sdd] Attached SCSI removable disk
[21473.103886] usb 1-7: USB disconnect, address 17
[21473.216059] usb 1-7: new high speed USB device using ehci_hcd and address 18
[21473.350843] usb 1-7: New USB device found, idVendor=13fe, idProduct=1d00
[21473.350868] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[21473.350882] usb 1-7: Product: Flash Disk      
[21473.350892] usb 1-7: Manufacturer: USB     
[21473.350902] usb 1-7: SerialNumber: 90711C0025DF
[21473.351091] usb 1-7: configuration #1 chosen from 1 choice
[21473.351496] scsi12 : SCSI emulation for USB Mass Storage devices
[21473.351785] usb-storage: device found at 18
[21473.351789] usb-storage: waiting for device to settle before scanning
[21474.348828] scsi 12:0:0:0: Direct-Access     USB      Flash Disk       V1.1 PQ: 0 ANSI: 0 CCS
[21474.349058] sd 12:0:0:0: Attached scsi generic sg6 type 0
[21474.349458] usb-storage: device scan complete
[21474.364391] sd 12:0:0:0: [sdd] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[21474.364938] sd 12:0:0:0: [sdd] Write Protect is off
[21474.364953] sd 12:0:0:0: [sdd] Mode Sense: 23 00 00 00
[21474.364957] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[21474.367690] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[21474.367710]  sdd: sdd1
[21474.372449] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[21474.372477] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[21480.340091] #
[21504.928057] usb 1-7: reset high speed USB device using ehci_hcd and address 18
[21547.928047] usb 1-7: reset high speed USB device using ehci_hcd and address 18
[21578.928041] usb 1-7: reset high speed USB device using ehci_hcd and address 18
[21579.808104] #
[21609.928035] usb 1-7: reset high speed USB device using ehci_hcd and address 18
[21610.155428] usb 1-7: device firmware changed
[21610.155500] sd 12:0:0:0: Device offlined - not ready after error recovery
[21610.155531] sd 12:0:0:0: [sdd] Unhandled error code
[21610.155543] sd 12:0:0:0: [sdd] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
[21610.155558] end_request: I/O error, dev sdd, sector 199
[21610.155593] sd 12:0:0:0: rejecting I/O to offline device
[21610.155626] sd 12:0:0:0: rejecting I/O to offline device
[21610.155644] sd 12:0:0:0: rejecting I/O to offline device

...

[21610.156901] sd 12:0:0:0: [sdd] Unhandled error code
[21610.156913] sd 12:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[21610.156928] end_request: I/O error, dev sdd, sector 200
[21610.157259] usb 1-7: USB disconnect, address 18
[21610.164526] FAT: FAT read failed (blocknr 167)
[21610.167070] FAT: FAT read failed (blocknr 2)
[21610.170381] FAT: FAT read failed (blocknr 2)
[21610.173980] FAT: FAT read failed (blocknr 2)