From: Raph <gibboris@gmail.com>
To: linux-hotplug@vger.kernel.org
Subject: smartcard not detected
Date: Sat, 10 Apr 2010 13:09:06 +0000 [thread overview]
Message-ID: <20100410130905.GA6362@deeebian> (raw)
Hi,
I'm using an eeepc 701 and just bought a SDHC card which
doesn't get detected unless :
- it's plugged at boot time
- I use udevadm trigger
- it has been detected once before (with either the first or
second method above)
If it's not an expected behavior below are some infos.
Thanks
Disk /dev/sdc: 4016 MB, 4016570368 bytes
255 heads, 63 sectors/track, 488 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000e9d0c
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/block/sdc
N: sdc
W: 23
S: block/8:32
S: disk/by-id/usb-USB2.0_CardReader_SD0_146030377350-0:0
S: disk/by-path/pci-0000:00:1d.7-usb-0:5:1.0-scsi-0:0:0:0
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host3/target3:0:0/3:0:0:0/block/sdc
E: MAJOR=8
E: MINOR2
E: DEVNAME=/dev/sdc
E: DEVTYPE=disk
E: SUBSYSTEM=block
E: ID_VENDOR=USB2.0
E: ID_VENDOR_ENC=USB2.0\x20\x20
E: ID_VENDOR_ID 51
E: ID_MODELÊrdReader_SD0
E: ID_MODEL_ENCÊrdReader\x20SD0\x20\x20
E: ID_MODEL_ID\x1606
E: ID_REVISION\x0100
E: ID_SERIAL=USB2.0_CardReader_SD0_146030377350-0:0
E: ID_SERIAL_SHORT\x146030377350
E: ID_TYPE=disk
E: ID_INSTANCE=0:0
E: ID_BUS=usb
E: ID_USB_INTERFACES=:080650:
E: ID_USB_INTERFACE_NUM\0
E: ID_USB_DRIVER=usb-storage
E: ID_PATH=pci-0000:00:1d.7-usb-0:5:1.0-scsi-0:0:0:0
E: DEVLINKS=/dev/block/8:32 /dev/disk/by-id/usb-USB2.0_CardReader_SD0_146030377350-0:0 /dev/disk/by-path/pci-0000:00:1d.7-usb-0:5:1.0-scsi-0:0:0:0
next reply other threads:[~2010-04-10 13:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-10 13:09 Raph [this message]
2010-04-11 17:07 ` smartcard not detected Kay Sievers
2010-04-11 21:54 ` Raph
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100410130905.GA6362@deeebian \
--to=gibboris@gmail.com \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).