From mboxrd@z Thu Jan 1 00:00:00 1970 From: "gregkh@linuxfoundation.org" Date: Wed, 11 Sep 2013 17:58:50 +0000 Subject: Re: loading 'acpiphp' fails =?utf-8?Q?afte?= =?utf-8?B?ciB0aGUgc3lzdGVtIGJvb3Q/4oCP?= Message-Id: <20130911175850.GA32469@kroah.com> List-Id: References: <20130910155103.GB22628@kroah.com> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: Shiro Itou =?utf-8?B?5LyK5p2x?= Cc: "linux-hotplug@vger.kernel.org" , "linux-acpi@vger.kernel.org" On Wed, Sep 11, 2013 at 10:46:19AM -0700, Shiro Itou 伊東 wrote: > ---------------------------------------- > > Date: Tue, 10 Sep 2013 08:51:03 -0700 > > From: gregkh@linuxfoundation.org > > To: shiro.itou@outlook.com > > CC: linux-hotplug@vger.kernel.org; linux-acpi@vger.kernel.org > > Subject: Re: loading 'acpiphp' fails after the system boot?‏ > > > > On Tue, Sep 10, 2013 at 08:43:05AM -0700, Shiro Itou 伊東 wrote: > >> Hi All, > >> > >> In kernel version 3.0, when ‘apciphp’ driver module is loaded, after > >> the system comes up, it fails with error “no such device”. When I > >> tried to debug I see that it fails in acpiphp_get_num_slots () > >> function with error "Total 0 slots". In this case ‘bridge_list’ seem > >> to be NULL. > >> But when the ‘acpiphp’ is loaded during boot time, it seems to work file. > > > > What happens in the 3.11 kernel release? Lots of work has been done in > > this area in the past 2 years, please try a newer kernel. If there are > > still problems, please let the linux-pci@vger.kernel.org mailing list > > know about it. > > Thank you for reply. I did not try 3.11 kernel. I will check 3.11 > kernel and see. But I use 3.0 kernel as a requirement. Then please contact the people who is in charge of that requirement, as they are the only ones that can support you, the community can not. Best of luck, greg k-h