system hang

system hang

[narasimharo bolisetti]

 Hi Greg/All, 
    
 This is Narasimharao working for a s/wcompany HCLT.. 
    
 I am working a issue and
 the description is below: 
    
 system stops booting and
 needs a series of console inputs (space bar or return) to
 continue booting. Each input advances the process a little
 bit. 
 Actually I am trying to
 upgrade the s/w from usb pendrive, part of this upgrade
 having multiple times we are disconnecting and connecting
 the usb pen drive. 
    
 system stops booting and
 needs a series of console inputs (space bar or return) to
 continue booting. Each input advances the process a little
 bit. 
 I have tried to find the
 root cause for the issue but not get success, can you help
 me regarding to this what is the root cause and how i can
 fix this? 
    
 One more thing i observed
 that the space allocated for tty by 'tty_write_room'
 is suddenly consumed by more than 2k at the time of issue
 occurs and gradually
  
 consuming remaining memory
 and when reaches to zero upgrade completely hangs and when
 console inputs (space bar or return) to continue booting,
  
 Each input advances the
 process a little bit. This console i/p's creating some
 space for the same . Is this problem in tty?
  
 one more thing we observed
 that whenever we increase the logging then this problem
 happens regularly. 
    
 [   66.233676]
 EXT3-fs (sda14): using internal journal 
 [   66.233691]
 EXT3-fs (sda14): mounted filesystem with ordered data
 mode                             
  
 [   76.822878]
 par.que...par_queue_user_receive: Freeze check =0 
 [   76.828711]
 par.que...par_queue_user_receive: <*> returned
 -ERESTARTSYS <*> event =-512 
 [   76.837241]
 par_ldisc_open:record is found for ttyS4 
 [   76.842766]
 par.que...par_queue_user_receive: Freeze check =0 
 [   76.848594]
 par.que...par_queue_user_receive: <*> returned
 -ERESTARTSYS <*> event =-512 
 [  101.781654] usb
 1-1.3: USB disconnect, address 3 
 [  104.029178] usb
 1-1.3: new high speed USB device using fsl-ehci and address
 4 
 [  104.159085] scsi2
 : usb-storage 1-1.3:1.0 
 [  105.163726] scsi
 2:0:0:0: Direct-Access     Kingston
 DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 
 [  105.173202] sd
 2:0:0:0: Attached scsi generic sg1 type 0 
 [  105.173686] sd
 2:0:0:0: [sdb] 4006912 512-byte logical blocks: (2.05
 GB/1.91 GiB) 
 [  105.174177] sd
 2:0:0:0: [sdb] Write Protect is off 
 [  105.174188] sd
 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 
 [  105.174197] sd
 2:0:0:0: [sdb] Assuming drive cache: write through 
 [  105.178804] sd
 2:0:0:0: [sdb] Assuming drive cache: write through 
 [  105.178825] 
 sdb: sdb1 
 [  105.295052] sd
 2:0:0:0: [sdb] Assuming drive cache: write through 
 [  105.301142] sd
 2:0:0:0: [sdb] Attached SCSI removable
 disk                      
 - Hangs at this place and
 console i/p’s to continue booting. 
    
 I have tried with
 different sizes and different vendors pen drives but problem
 is the same and occurs at the same place. 
    
 Your valuable inputs and
 suggetions are helpful to fix this issue. 
    
 My kernel version is:
 2.6.35.6-45.fc14.i686 
    
 Thanks in advance for
 helping and replying. 
    
    
 Regards, 
 Narasimharao B 
    
    
    
    
    
 
 
 
 
 ::DISCLAIMER::
 ----------------------------------------------------------------------------------------------------------------------------------------------------
 The contents of
 this e-mail and any attachment(s) are confidential and
 intended for the named recipient(s) only.
 E-mail transmission is not guaranteed to be secure or
 error-free as information could be intercepted, corrupted, 
 lost, destroyed, arrive late or incomplete, or may contain
 viruses in transmission. The e mail and its contents 
 (with or without referred errors) shall therefore not attach
 any liability on the originator or HCL or its affiliates. 
 Views or opinions, if any, presented in this email are
 solely those of the author and may not necessarily reflect
 the 
 views or opinions of HCL or its affiliates. Any form of
 reproduction, dissemination, copying, disclosure,
 modification, 
 distribution and / or publication of this message without
 the prior written consent of authorized representative of 
 HCL is strictly prohibited. If you have received this email
 in error please delete it and notify the sender immediately.
 
 Before opening any email and/or attachments, please check
 them for viruses and other defects.
 ----------------------------------------------------------------------------------------------------------------------------------------------------
 
 

Re: system hang

[Willy Tarreau]

On Thu, Apr 10, 2014 at 12:05:52AM -0700, narasimharo bolisetti wrote:
>  My kernel version is:
>  2.6.35.6-45.fc14.i686 

Maintenance for this kernel has been dropped years ago, so it very
likely contains many bugs that were fixed in more recent ones. You
should definitely upgrade.

Hoping this helps,
Willy

RE: system hang

[Narasimharao Bolisetti]

Hi,

I have checked the same in the recent kernel versions also. Issue is still remain.

Regards,
Narasimharao B


-----Original Message-----
From: Willy Tarreau [mailto:w@1wt.eu] 
Sent: 10 April 2014 13:26
To: narasimharo bolisetti
Cc: linux-kernel@vger.kernel.org; kernelnewbies@nl.linux.org; devel@linuxdriverproject.org; linux-serial@vger.kernel.org; linux-hotplug@vger.kernel.org; greg@kroah.com; Narasimharao Bolisetti; nrbolisetti@gmail.com; stable@vger.kernel.org; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org
Subject: Re: system hang

On Thu, Apr 10, 2014 at 12:05:52AM -0700, narasimharo bolisetti wrote:
>  My kernel version is:
>  2.6.35.6-45.fc14.i686

Maintenance for this kernel has been dropped years ago, so it very likely contains many bugs that were fixed in more recent ones. You should definitely upgrade.

Hoping this helps,
Willy



::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------

Re: system hang

[greg]

On Thu, Apr 10, 2014 at 07:59:38AM +0000, Narasimharao Bolisetti wrote:
> 
> Hi,
> 
> I have checked the same in the recent kernel versions also. Issue is still remain.

What versions have you tried, and what are the logs from those versions?

> ::DISCLAIMER::
> ----------------------------------------------------------------------------------------------------------------------------------------------------
> 
> The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
> E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
> (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
> Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
> views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior written consent of authorized representative of
> HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses and other defects.
> 
> ----------------------------------------------------------------------------------------------------------------------------------------------------


Oops, sorry, nope, I'm not allowed to respond to anyone with such an
email footer, it's not compatible with Linux kernel development (Linux
is not confidential.)

Best of luck, I suggest you work with the vendor who is forcing you to
stick with such an old kernel version.

greg k-h