linux-hotplug.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* multi-port usb-serial hub rules
@ 2014-07-06  2:18 shawn wilson
  2014-07-06  3:31 ` Greg KH
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: shawn wilson @ 2014-07-06  2:18 UTC (permalink / raw)
  To: linux-hotplug

I've got a few usb to 4 serial port hubs. The problem is that
sometimes the ttyUSB* devs get resorted. I'm trying to write rules to
handle them (and maybe name the devices after the machines they're
connected to) however, I'm stuck because they only show up as one usb
device (and not another usb hub with a serial device on each port):

  looking at device
'/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/ttyUSB11/tty/ttyUSB11':
    KERNEL="ttyUSB11"
    SUBSYSTEM="tty"
    DRIVER=""

  looking at parent device
'/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/ttyUSB11':
    KERNELS="ttyUSB11"
    SUBSYSTEMS="usb-serial"
    DRIVERS="keyspan_4"
    ATTRS{port_number}="3"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0':
    KERNELS="2-5:1.0"
    SUBSYSTEMS="usb"
    DRIVERS="keyspan"
    ATTRS{bInterfaceClass}="ff"
    ATTRS{bInterfaceSubClass}="00"
    ATTRS{bInterfaceProtocol}="00"
    ATTRS{bNumEndpoints}="06"
    ATTRS{supports_autosuspend}="1"
    ATTRS{bAlternateSetting}=" 0"
    ATTRS{bInterfaceNumber}="00"

and another port on the same device:
  looking at device
'/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/ttyUSB8/tty/ttyUSB8':
    KERNEL="ttyUSB8"
    SUBSYSTEM="tty"
    DRIVER=""

  looking at parent device
'/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/ttyUSB8':
    KERNELS="ttyUSB8"
    SUBSYSTEMS="usb-serial"
    DRIVERS="keyspan_4"
    ATTRS{port_number}="0"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0':
    KERNELS="2-5:1.0"
    SUBSYSTEMS="usb"
    DRIVERS="keyspan"
    ATTRS{bInterfaceClass}="ff"
    ATTRS{bInterfaceSubClass}="00"
    ATTRS{bInterfaceProtocol}="00"
    ATTRS{bNumEndpoints}="06"
    ATTRS{supports_autosuspend}="1"
    ATTRS{bAlternateSetting}=" 0"
    ATTRS{bInterfaceNumber}="00"

So, if I just want to create a symlink, I could match on
KERNELS="ttyUSB*", ATTRS{port_number}="blah" and be good, however
since things sometimes become resorted, I'd like to match on both the
usb port (in the below stanza's KERNELS) and the 'port_number' in the
one above. How do I do that?

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-07-06 16:07 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-06  2:18 multi-port usb-serial hub rules shawn wilson
2014-07-06  3:31 ` Greg KH
2014-07-06  5:11 ` shawn wilson
2014-07-06 16:07 ` Andrey Borzenkov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).