Vodafone 3G/UMTS Datacard

Vodafone 3G/UMTS Datacard

[Bernd Broermann]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="windows-1252", Size: 2279 bytes --]

Hi,
I have a more or less a user question.
My device is a Vodafone 3G/UMTS Datacard.
The card works when I modify the modules.conf like a usbseriel device.

How can I use it with hotplug mechanism ?
I am using SuSE 9.0 , hotplug-2002_08_26.

Thanks
Bernd



when i plug it in i get
Apr  2 14:11:23 vaio kernel: hub.c: new USB device 07:00.0-1, assigned 
address 3
Apr  2 14:11:23 vaio kernel: usb.c: USB device 3 (vend/prod 
0xaf0/0x5000) is not claimed by any active dr

after putting
options  usbserial vendor=0xaf0 product=0x5000
in /etc/modules.conf :

Apr  2 18:36:33 vaio kernel: hub.c: new USB device 07:00.0-1, assigned 
address 3
Apr  2 18:36:33 vaio kernel: usbserial.c: Generic converter detected
Apr  2 18:36:33 vaio kernel: usbserial.c: Generic converter now attached 
to ttyUSB0 (or usb/tts/0 for devfs)
Apr  2 18:36:33 vaio kernel: usbserial.c: Generic converter detected
Apr  2 18:36:33 vaio kernel: usbserial.c: Generic converter now attached 
to ttyUSB1 (or usb/tts/1 for devfs)
Apr  2 18:36:33 vaio kernel: usbserial.c: Generic converter detected
Apr  2 18:36:33 vaio kernel: usbserial.c: Generic converter now attached 
to ttyUSB2 (or usb/tts/2 for devfs)

Then I can use it like a modem.
See also : http://www.kuix.de/umts/vodafone/

cat /proc/bus/usb/devices
......
C:* #Ifs= 1 Cfg#= 1 Atr@ MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls	(hub  ) Sub\0 Prot\0 Driver=hub
E:  Ad(I) Atr\x03(Int.) MxPS=   2 Ivl%5ms
T:  Bus\x04 Lev\x01 Prnt\x01 Port\0 Cnt\x01 Dev#=  3 Spd\x12  MxCh= 0
D:  Ver= 2.00 Cls\0(>ifc ) Sub\0 Prot\0 MxPS\x16 #Cfgs=  1
P:  Vendor
f0 ProdIDP00 Rev= 0.00
S:  Manufacturer=Vodafone
S:  Product=Vodafone Mobile Connect Card - 3G
S:  SerialNumber=Serial Number
......


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel