* Re: [ANNOUNCE] udev 038 release
2004-10-14 0:39 [ANNOUNCE] udev 038 release Greg KH
@ 2004-10-14 7:09 ` Frank Steiner
2004-10-14 13:56 ` Kay Sievers
2004-10-14 10:14 ` Arkadiusz Miskiewicz
` (4 subsequent siblings)
5 siblings, 1 reply; 8+ messages in thread
From: Frank Steiner @ 2004-10-14 7:09 UTC (permalink / raw)
To: Greg KH; +Cc: linux-hotplug-devel, linux-kernel
Hi,
"make install" fails with
galois tmp/udev-038# make udevdir=/dev DESTDIR=/root/tmp/test/ EXTRAS="extras/scsi_id" install
make: *** No rule to make target `etc/init.d/udev.debian', needed by `install-initscript'. Stop.
because there is no udev.debian in etc/init.d/ in the sources.
cu,
Frank
--
Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17 Phone: +49 89 2180-4049
80333 Muenchen, Germany Fax: +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [ANNOUNCE] udev 038 release
2004-10-14 7:09 ` Frank Steiner
@ 2004-10-14 13:56 ` Kay Sievers
0 siblings, 0 replies; 8+ messages in thread
From: Kay Sievers @ 2004-10-14 13:56 UTC (permalink / raw)
To: Frank Steiner; +Cc: Greg KH, linux-hotplug-devel, linux-kernel
On Thu, Oct 14, 2004 at 09:09:09AM +0200, Frank Steiner wrote:
> Hi,
>
> "make install" fails with
>
> galois tmp/udev-038# make udevdir=/dev DESTDIR=/root/tmp/test/
> EXTRAS="extras/scsi_id" install
> make: *** No rule to make target `etc/init.d/udev.debian', needed by
> `install-initscript'. Stop.
It's already fixed in the tree. The next version will have it:
http://linuxusb.bkbits.net:8080/udev/patch@1.921?nav=index.html|ChangeSet@-2d|cset@1.921
Thanks,
Kay
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [ANNOUNCE] udev 038 release
2004-10-14 0:39 [ANNOUNCE] udev 038 release Greg KH
2004-10-14 7:09 ` Frank Steiner
@ 2004-10-14 10:14 ` Arkadiusz Miskiewicz
2004-10-14 18:46 ` Greg KH
` (3 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Arkadiusz Miskiewicz @ 2004-10-14 10:14 UTC (permalink / raw)
To: linux-hotplug
On Thursday 14 of October 2004 02:39, Greg KH wrote:
> I've released the 038 version of udev. It can be found at:
> kernel.org/pub/linux/utils/kernel/hotplug/udev-038.tar.gz
Parallel make is now broken (was working fine with 034). Try make -j5.
--
Arkadiusz Mi¶kiewicz PLD/Linux Team
http://www.t17.ds.pwr.wroc.pl/~misiek/ http://ftp.pld-linux.org/
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [ANNOUNCE] udev 038 release
2004-10-14 0:39 [ANNOUNCE] udev 038 release Greg KH
2004-10-14 7:09 ` Frank Steiner
2004-10-14 10:14 ` Arkadiusz Miskiewicz
@ 2004-10-14 18:46 ` Greg KH
2004-10-15 9:07 ` Prakash K. Cheemplavam
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2004-10-14 18:46 UTC (permalink / raw)
To: linux-hotplug
On Thu, Oct 14, 2004 at 12:14:47PM +0200, Arkadiusz Miskiewicz wrote:
> On Thursday 14 of October 2004 02:39, Greg KH wrote:
> > I've released the 038 version of udev. It can be found at:
> > kernel.org/pub/linux/utils/kernel/hotplug/udev-038.tar.gz
> Parallel make is now broken (was working fine with 034). Try make -j5.
Argh, sorry about that. I've fixed it in the tree now.
Thanks for letting me know.
greg k-h
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [ANNOUNCE] udev 038 release
2004-10-14 0:39 [ANNOUNCE] udev 038 release Greg KH
` (2 preceding siblings ...)
2004-10-14 18:46 ` Greg KH
@ 2004-10-15 9:07 ` Prakash K. Cheemplavam
2004-10-15 11:20 ` Kay Sievers
2004-10-15 15:23 ` Prakash K. Cheemplavam
5 siblings, 0 replies; 8+ messages in thread
From: Prakash K. Cheemplavam @ 2004-10-15 9:07 UTC (permalink / raw)
To: Greg KH; +Cc: linux-hotplug-devel, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 398 bytes --]
Hi,
going from udev-036 to 038 on gentoo resulted in following problem for me:
I load the nvidia module via /etc/modules.autoload.d/kernel-2.6. With
udev-036 the device nodes eventually were created fast enough so that
kdm could start. With udev-038 it is not the case. The boot ends at the
log-in, and I have to manually start kdm.
What is the right way to get this going?
Cheers,
Prakash
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 257 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [ANNOUNCE] udev 038 release
2004-10-14 0:39 [ANNOUNCE] udev 038 release Greg KH
` (3 preceding siblings ...)
2004-10-15 9:07 ` Prakash K. Cheemplavam
@ 2004-10-15 11:20 ` Kay Sievers
2004-10-15 15:23 ` Prakash K. Cheemplavam
5 siblings, 0 replies; 8+ messages in thread
From: Kay Sievers @ 2004-10-15 11:20 UTC (permalink / raw)
To: linux-hotplug
On Fri, Oct 15, 2004 at 11:07:56AM +0200, Prakash K. Cheemplavam wrote:
> Hi,
>
> going from udev-036 to 038 on gentoo resulted in following problem for me:
>
> I load the nvidia module via /etc/modules.autoload.d/kernel-2.6. With
> udev-036 the device nodes eventually were created fast enough so that
> kdm could start. With udev-038 it is not the case. The boot ends at the
> log-in, and I have to manually start kdm.
>
> What is the right way to get this going?
Is there anything in the syslog regarding this?
Do you use the latest bitkeeper version or the "real" v038?
Kay
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [ANNOUNCE] udev 038 release
2004-10-14 0:39 [ANNOUNCE] udev 038 release Greg KH
` (4 preceding siblings ...)
2004-10-15 11:20 ` Kay Sievers
@ 2004-10-15 15:23 ` Prakash K. Cheemplavam
5 siblings, 0 replies; 8+ messages in thread
From: Prakash K. Cheemplavam @ 2004-10-15 15:23 UTC (permalink / raw)
To: linux-hotplug
[-- Attachment #1: Type: text/plain, Size: 910 bytes --]
Kay Sievers schrieb:
> On Fri, Oct 15, 2004 at 11:07:56AM +0200, Prakash K. Cheemplavam wrote:
>
>>Hi,
>>
>>going from udev-036 to 038 on gentoo resulted in following problem for me:
>>
>>I load the nvidia module via /etc/modules.autoload.d/kernel-2.6. With
>>udev-036 the device nodes eventually were created fast enough so that
>>kdm could start. With udev-038 it is not the case. The boot ends at the
>>log-in, and I have to manually start kdm.
>>
>>What is the right way to get this going?
>
>
> Is there anything in the syslog regarding this?
Unfortunately not. The Xorg.0.log says that it failed to initialize the
Nvidia kernel module and aborts with "no screens found". But as sson as
I log in as root and start the kdm script, everything works as expected.
> Do you use the latest bitkeeper version or the "real" v038?
I guess the "real" one, ie the one the gentoo ebuild fetches.
Prakash
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 257 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread