Getting wireless to work on public wireless network

Getting wireless to work on public wireless network

[tj]

this may not be the place to ask this and if not kindly point me to the 
appropiate place and I will ask there.

I have my HP N5150 with a Belkin 802.11g wireless card WORKING on my 
home network using hotplug.d and wireless.opts. Where it gets it's 
essid, encyption, etc parameters.

Now, I go to my local library and wish to use their open wireless 
network. There params are
mode: managed
encyption: off
essid: JCPLWireless

I fire up and of course I don't connect because I am using my home 
parmeters. Running 'iwlist wlan0 scanning' reveals the JCPLWireless 
network as advertised. Ok, I enter:
iwconfig wlan0 mode managed
iwconfig wlan0 enc off
iwconfig wlan0 essid JCPLWireless

But then running 'iwconfig wlan0' it lists 'ESSID=""'. All other params 
are set to the new values, mode managed and enc off.

So, what do I need to do to get connected to a public wireless network 
WITHOUT having to change wireless.opts every time.

tj




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel