From: Jim Gifford <maillist@jg555.com>
To: linux-hotplug@vger.kernel.org
Subject: Re: Prism54 -- error loading firmware
Date: Fri, 11 Mar 2005 09:17:24 +0000 [thread overview]
Message-ID: <42316224.8050001@jg555.com> (raw)
In-Reply-To: <42313FDA.8050402@jg555.com>
Kay Sievers wrote:
>What does:
> cat /proc/sys/kernel/hotplug
>
>print?
>
>
>
/sbin/hotplug
>Please record the hotplug event timing with the attached script, by
>placing it as:
> /etc/hotplug.d/default/00-log.hotplug
>
>And post the corresponding timestamps from syslog too, while loading the
>module that requests the firmware.
>
>Kay
>
>
From syslog
Mar 11 01:04:19 laptop Loaded prism54 driver, version 1.2
Mar 11 01:04:19 laptop PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Mar 11 01:04:19 laptop ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11
(level, low) -> IRQ 11
Mar 11 01:04:37 laptop eth0: resetting device...
Mar 11 01:04:37 laptop eth0: uploading firmware...
Mar 11 01:04:47 laptop prism54: request_firmware() failed for 'isl3890'
Mar 11 01:04:47 laptop eth0: could not upload firmware ('isl3890')
Mar 11 01:04:47 laptop eth0: islpci_reset: failure
Mar 11 01:04:54 laptop eth0: hot unplug detected
Mar 11 01:04:54 laptop eth0: removing device
from events
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=module
HOTPLUG_ARGSDEVPATH=/module/firmware_class
HOTPLUG_TYPE=module
ACTIONd
SEQNUM88
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=class
HOTPLUG_ARGSDEVPATH=/class/firmware
HOTPLUG_TYPE=class
ACTIONd
SEQNUM89
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=module
HOTPLUG_ARGSDEVPATH=/module/prism54
HOTPLUG_TYPE=module
ACTIONd
SEQNUM90
HOTPLUG_TIME='Fri Mar 11 01:02:48 PST 2005'
SUBSYSTEM=drivers
HOTPLUG_ARGSDEVPATH=/bus/pci/drivers/prism54
HOTPLUG_TYPE=drivers
ACTIONd
SEQNUM91
from hotplug_d.log
--------415--------
1110532073 remove /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER<59x INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMA5
--------415--------
--------416--------
1110532073 remove /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x10B7:5257 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B7:5C57 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS 000 SEQNUMA6
--------416--------
--------417--------
1110532082 add /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x1260:3890 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B8:2835 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS(000 SEQNUMA7
--------417--------
--------418--------
1110532082 add /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMA8
--------418--------
--------419--------
1110532093 add /class/firmware/0000:02:00.0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=firmware DEVPATH=/class/firmware/0000:02:00.0 FIRMWARE=isl3890 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 PHYSDEVBUS=pci SEQNUMA9
--------419--------
--------420--------
1110532103 remove /class/firmware/0000:02:00.0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=firmware DEVPATH=/class/firmware/0000:02:00.0 FIRMWARE=isl3890 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 PHYSDEVBUS=pci SEQNUMB0
--------420--------
--------422--------
1110532119 remove /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x1260:3890 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B8:2835 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS(000 SEQNUMB2
--------422--------
--------421--------
1110532119 remove /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTION=remove _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER=prism54 INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMB1
--------421--------
--------423--------
1110532324 add /devices/pci0000:00/0000:00:0a.0/0000:02:00.0
PCI_SLOT_NAME\000:02:00.0 PCI_ID\x10B7:5257 SUBSYSTEM=pci DEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ PCI_SUBSYS_ID\x10B7:5C57 HOME=/ SHLVL=2 PHYSDEVBUS=pci PCI_CLASS 000 SEQNUMB3
--------423--------
--------424--------
1110532324 add /class/net/eth0
PHYSDEVPATH=/devices/pci0000:00/0000:00:0a.0/0000:02:00.0 SUBSYSTEM=net DEVPATH=/class/net/eth0 PATH=/sbin:/bin:/usr/sbin:/usr/bin ACTIONd _=/usr/bin/env PWD=/ HOME=/ SHLVL=2 PHYSDEVDRIVER<59x INTERFACE=eth0 PHYSDEVBUS=pci SEQNUMB4
--------424--------
--
----
Jim Gifford
maillist@jg555.com
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next prev parent reply other threads:[~2005-03-11 9:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-11 6:51 Prism54 -- error loading firmware Jim Gifford
2005-03-11 7:38 ` Stefan Schweizer
2005-03-11 7:42 ` Jim Gifford
2005-03-11 8:12 ` Kay Sievers
2005-03-11 9:17 ` Jim Gifford [this message]
2005-03-11 9:40 ` Kay Sievers
2005-03-11 16:04 ` Jim Gifford
2005-03-11 18:36 ` Jim Gifford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42316224.8050001@jg555.com \
--to=maillist@jg555.com \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).