From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jim Gifford Date: Fri, 20 Jan 2006 00:47:28 +0000 Subject: Udev - Hot/Cold Plugging and Sparc Message-Id: <43D03320.6050301@jg555.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org First of thank you Kay and Greg, with all the information you have provided, I was able to make a usable udev package. Now I'm working on getting the same package to recognize some exotic hardware and hope you guys can provide some guidance. On the x86, the rtc module gets located ok and loads, while on the sparc it doesn't seem to ever find it, not sure if it's a script problem, udev problem, or it's a module issue. I do know when I modprobe rtc, it shows up, but when I run udevinfo, I don't see enough useful information to create a rule. Output below. udevinfo -a -p /sys/class/misc/rtc udevinfo starts with the device the node belongs to and then walks up the device chain, to print for every device found, all possibly useful attributes in the udev key format. Only attributes within one device section may be used together in one rule, to match the device for which the node will be created. looking at device '/class/misc/rtc': KERNEL="rtc" SUBSYSTEM="misc" SYSFS{dev}="10:135" -- ---- Jim Gifford maillist@jg555.com ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642 _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel