UDev Rules migration from 2.6.13 to 2.6.18

UDev Rules migration from 2.6.13 to 2.6.18

[Jonathan Selby]

Hello Team,
      I am having trouble migrating my driver loading code from SuSE 10.0 to SuSE 10.2

It seems there is a fundamental way UDEV works from kernel to kernel.

As a background, the device is a EZUSB that requires a firmware load via FXload

I am including the rules:


ENV{UDEV_LOG}="[4-9]", RUN+="/sbin/hotplugeventrecorder"
KERNEL="sky0",   GROUP="users"
ACTION="add",BUS="usb", ENV{PRODUCT}="1275/80/*", RUN+="/sbin/fxload -t fx -I 
/etc/hotplug/usb/ezusb.fw/isostrml.hex"

And the logging output  for 10.0 (works)

And 10.2 that fails where FXLoad cannot find the proc/bus/usb node.

If I manually load the firmware after resolving the proc/var/bus all works fine.

Any ideas gratefully received.

Thanks


SuSE 10.0 output

2.6.13-15.8-default


Feb 12 16:17:28 carnotaur-l kernel: usb 1-1: new full speed USB device using uhci_hcd and address 25
Feb 12 16:17:55 carnotaur-l syslog-ng[4396]: STATS: dropped 0
Feb 12 16:18:38 carnotaur-l kernel: usb 1-1: USB disconnect, address 25
Feb 12 16:20:17 carnotaur-l kernel: usb 1-1: new full speed USB device using uhci_hcd and address 26
Feb 12 16:20:17 carnotaur-l udevd[2104]: msg_queue_insert: seq 1363 queued, 'add' 
'/devices/pci0000:00/0000:00:10.0/usb1/1-1'
Feb 12 16:20:17 carnotaur-l udevd[2104]: udev_event_run: seq 1363 forked, pid [10302], 'add' 'usb', 
0 seconds old
Feb 12 16:20:18 carnotaur-l udevd[2104]: msg_queue_insert: seq 1364 queued, 'add' 
'/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0'
Feb 12 16:20:18 carnotaur-l udevd[2104]: msg_queue_insert: seq 1365 queued, 'add' 
'/class/usb_device/usbdev1.26'
Feb 12 16:20:17 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup 
usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1 -o hotplug'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 
'usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1 -o hotplug'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 
'HWDESC='usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1''
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'CONFIG='''
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'MODE=auto'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'HOTPLUG=yes'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'SUBSYSTEM=usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'MODALIAS='
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'HWD_BUS_N=0'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG='
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG_N=0'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVICEPATH=/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'HWD_DEVTYPE=usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESC=usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESCTYPE=invalid'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'HWD_INTERFACE_N=0'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' (stderr) 'No module alias 
available'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hwup' returned with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/usr/sbin/hal.hotplug' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hotplugeventrecorder' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10302]: udev_event_run: seq 1363 finished
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_done: seq 1363, pid [10302] exit, 0 seconds old
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_event_run: seq 1364 forked, pid [10315], 'add' 'usb', 
0 seconds old
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup 
usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0 -o hotplug'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0 -o hotplug'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'HWDESC='usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0''
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'CONFIG='''
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'MODE=auto'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'HOTPLUG=yes'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'SUBSYSTEM=usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'MODALIAS=usb:v1275p0080d0001dcFFdscFFdpFFicFFiscFFipFF'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'HWD_BUS_N=0'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG='
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG_N=0'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVICEPATH=/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'HWD_DEVTYPE=usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESC=usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESCTYPE=invalid'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'HWD_INTERFACE_N=0'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'executing 
modprobe usb:v1275p0080d0001dcFFdscFFdpFFicFFiscFFipFF'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' (stderr) 'FATAL: Module 
usb:v1275p0080d0001dcFFdscFFdpFFicFFiscFFipFF not found.'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hwup' returned with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/usr/sbin/hal.hotplug' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hotplugeventrecorder' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/fxload -t fx -I 
/etc/hotplug/usb/ezusb.fw/isostrml.hex'
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: run_program: '/sbin/fxload' returned with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10315]: udev_event_run: seq 1364 finished
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_done: seq 1364, pid [10315] exit, 1 seconds old
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_event_run: seq 1365 forked, pid [10331], 'add' 
'usb_device', 1 seconds old
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: run_program: '/bin/sh -c 'X=usbdev1.26 X=${X#usbdev} 
B=${X%%.*} D=${X#*.}; echo bus/usb/$B/$D''
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: run_program: '/bin/sh' (stdout) 'bus/usb/1/26'
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: run_program: '/bin/sh' returned with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: udev_rules_get_name: add symlink 'bus/usb/1/26'
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: udev_rules_get_name: no node name set, will use 
kernel name 'usbdev1.26'
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: create_node: creating device node '/dev/usbdev1.26'
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: create_node: creating symlink '/dev/bus/usb/1/26' to 
'../../../usbdev1.26'
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: run_program: '/usr/sbin/hal.hotplug' 'usb_device'
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: run_program: '/sbin/hotplugeventrecorder' 'usb_device'
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10331]: udev_event_run: seq 1365 finished
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_done: seq 1365, pid [10331] exit, 1 seconds old
Feb 12 16:20:18 carnotaur-l udevd[2104]: msg_queue_insert: seq 1366 queued, 'remove' 
'/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0'
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_event_run: seq 1366 forked, pid [10335], 'remove' 
'usb', 0 seconds old
Feb 12 16:20:18 carnotaur-l udevd[2104]: msg_queue_insert: seq 1367 queued, 'remove' 
'/class/usb_device/usbdev1.26'
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_event_run: seq 1367 forked, pid [10336], 'remove' 
'usb_device', 0 seconds old
Feb 12 16:20:18 carnotaur-l udevd[2104]: msg_queue_insert: seq 1368 queued, 'remove' 
'/devices/pci0000:00/0000:00:10.0/usb1/1-1'
Feb 12 16:20:18 carnotaur-l kernel: usb 1-1: USB disconnect, address 26
Feb 12 16:20:18 carnotaur-l udevd-event[10335]: run_program: '/usr/sbin/hal.hotplug' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10335]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10335]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:18 carnotaur-l udevd-event[10335]: run_program: '/sbin/hotplugeventrecorder' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10335]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10335]: udev_event_run: seq 1366 finished
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_done: seq 1366, pid [10335] exit, 0 seconds old
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_event_run: seq 1368 forked, pid [10339], 'remove' 
'usb', 0 seconds old
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: delete_node: removing symlink '/dev/bus/usb/1/26'
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: delete_node: removing device node '/dev/usbdev1.26'
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: run_program: '/usr/sbin/hal.hotplug' 'usb_device'
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: run_program: '/sbin/hotplugeventrecorder' 'usb_device'
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10336]: udev_event_run: seq 1367 finished
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_done: seq 1367, pid [10336] exit, 0 seconds old
Feb 12 16:20:18 carnotaur-l udevd-event[10339]: run_program: '/usr/sbin/hal.hotplug' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10339]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10339]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:18 carnotaur-l udevd-event[10339]: run_program: '/sbin/hotplugeventrecorder' 'usb'
Feb 12 16:20:18 carnotaur-l udevd-event[10339]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:18 carnotaur-l udevd-event[10339]: udev_event_run: seq 1368 finished
Feb 12 16:20:18 carnotaur-l udevd[2104]: udev_done: seq 1368, pid [10339] exit, 0 seconds old
Feb 12 16:20:20 carnotaur-l kernel: usb 1-1: new full speed USB device using uhci_hcd and address 27
Feb 12 16:20:20 carnotaur-l udevd[2104]: msg_queue_insert: seq 1369 queued, 'add' 
'/devices/pci0000:00/0000:00:10.0/usb1/1-1'
Feb 12 16:20:20 carnotaur-l udevd[2104]: udev_event_run: seq 1369 forked, pid [10347], 'add' 'usb', 
0 seconds old
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup 
usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1 -o hotplug'
Feb 12 16:20:20 carnotaur-l udevd[2104]: msg_queue_insert: seq 1370 queued, 'add' 
'/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0'
Feb 12 16:20:20 carnotaur-l udevd[2104]: msg_queue_insert: seq 1371 queued, 'add' '/class/usb/sky0'
Feb 12 16:20:20 carnotaur-l kernel: /home/jon/skyeye/install_kernel_2.6/skydriver-driver.c: USB 
SkyEye device now attached to 192
Feb 12 16:20:20 carnotaur-l udevd[2104]: msg_queue_insert: seq 1372 queued, 'add' 
'/class/usb_device/usbdev1.27'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 
'usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1 -o hotplug'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 
'HWDESC='usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1''
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'CONFIG='''
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'MODE=auto'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'HOTPLUG=yes'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'SUBSYSTEM=usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'MODALIAS='
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'HWD_BUS_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG='
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVICEPATH=/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'HWD_DEVTYPE=usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESC=usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESCTYPE=invalid'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'HWD_INTERFACE_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' (stderr) 'No module alias 
available'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hwup' returned with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/usr/sbin/hal.hotplug' 'usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hotplugeventrecorder' 'usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10347]: udev_event_run: seq 1369 finished
Feb 12 16:20:20 carnotaur-l udevd[2104]: udev_done: seq 1369, pid [10347] exit, 0 seconds old
Feb 12 16:20:20 carnotaur-l udevd[2104]: udev_event_run: seq 1370 forked, pid [10360], 'add' 'usb', 
0 seconds old
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup 
usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0 -o hotplug'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0 -o hotplug'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'HWDESC='usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0''
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'CONFIG='''
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'MODE=auto'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'HOTPLUG=yes'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'SUBSYSTEM=usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'MODALIAS=usb:v1275p0081d0001dc00dsc00dp00icFFisc00ip00'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'HWD_BUS_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG='
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVICEPATH=/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'HWD_DEVTYPE=usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESC=usb-devpath-/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESCTYPE=invalid'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'HWD_INTERFACE_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'executing 
modprobe usb:v1275p0081d0001dc00dsc00dp00icFFisc00ip00'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' (stderr) 'modules already 
loaded: usbcore skydriver-driver'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hwup' returned with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/usr/sbin/hal.hotplug' 'usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hotplugeventrecorder' 'usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10360]: udev_event_run: seq 1370 finished
Feb 12 16:20:20 carnotaur-l udevd[2104]: udev_done: seq 1370, pid [10360] exit, 0 seconds old
Feb 12 16:20:20 carnotaur-l udevd[2104]: udev_event_run: seq 1371 forked, pid [10378], 'add' 'usb', 
0 seconds old
Feb 12 16:20:20 carnotaur-l udevd[2104]: udev_event_run: seq 1372 forked, pid [10379], 'add' 
'usb_device', 0 seconds old
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: udev_rules_get_name: no node name set, will use 
kernel name 'sky0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: create_node: creating device node '/dev/sky0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup 
usb-devpath-/sys/class/usb/sky0 -o hotplug'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: run_program: '/bin/sh -c 'X=usbdev1.27 X=${X#usbdev} 
B=${X%%.*} D=${X#*.}; echo bus/usb/$B/$D''
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: run_program: '/bin/sh' (stdout) 'bus/usb/1/27'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: run_program: '/bin/sh' returned with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: udev_rules_get_name: add symlink 'bus/usb/1/27'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: udev_rules_get_name: no node name set, will use 
kernel name 'usbdev1.27'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: create_node: creating device node '/dev/usbdev1.27'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: create_node: creating symlink '/dev/bus/usb/1/27' to 
'../../../usbdev1.27'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: run_program: '/usr/sbin/hal.hotplug' 'usb_device'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: run_program: '/sbin/hotplugeventrecorder' 'usb_device'
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10379]: udev_event_run: seq 1372 finished
Feb 12 16:20:20 carnotaur-l udevd[2104]: udev_done: seq 1372, pid [10379] exit, 0 seconds old
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'usb-devpath-/sys/class/usb/sky0 -o hotplug'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'HWDESC='usb-devpath-/sys/class/usb/sky0''
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'CONFIG='''
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'MODE=auto'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'HOTPLUG=yes'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'SUBSYSTEM=usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'MODALIAS='
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'HWD_BUS_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG='
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVICEPATH=/sys/class/usb/sky0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVPATH=/sys/class/usb/sky0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'HWD_DEVTYPE=usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESCÞvpath-/sys/class/usb/sky0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESCTYPEÞvpath'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'HWD_INTERFACE_N=0'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' (stderr) 'No module alias 
available'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hwup' returned with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/usr/sbin/hal.hotplug' 'usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/usr/sbin/hal.hotplug' returned with 
status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hotplugeventrecorder' 'usb'
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: run_program: '/sbin/hotplugeventrecorder' returned 
with status 0
Feb 12 16:20:20 carnotaur-l udevd-event[10378]: udev_event_run: seq 1371 finished




SuSE 10.2 output :

Kernel:

2.6.18.2-34-default




Feb 12 16:35:56 suse102vm udevd[891]: udev_event_run: seq 1494 forked, pid [4717], 'remove' 'usb', 0 
seconds old
Feb 12 16:35:56 suse102vm udevd-event[4717]: pass_env_to_socket: passed 179 bytes to socket 
'/org/freedesktop/hal/udev_event',
Feb 12 16:35:56 suse102vm udevd-event[4717]: run_program: 'eventrecorder.sh'
Feb 12 16:35:56 suse102vm udevd-event[4717]: run_program: '/lib/udev/eventrecorder.sh' returned with 
status 0
Feb 12 16:35:56 suse102vm udevd-event[4717]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:35:56 suse102vm udevd-event[4717]: run_program: '/sbin/hotplugeventrecorder'
Feb 12 16:35:56 suse102vm udevd-event[4719]: run_program: exec of program 
'/sbin/hotplugeventrecorder' failed
Feb 12 16:35:56 suse102vm udevd-event[4717]: run_program: '/sbin/hotplugeventrecorder' returned with 
status 1
Feb 12 16:35:56 suse102vm udevd-event[4717]: udev_event_run: seq 1494 finished
Feb 12 16:35:56 suse102vm udevd[891]: udev_done: seq 1494, pid [4717] exit with 1, 0 seconds old
Feb 12 16:36:02 suse102vm kernel: usb 1-1: new full speed USB device using uhci_hcd and address 20
Feb 12 16:36:02 suse102vm kernel: usb 1-1: new device found, idVendor\x1275, idProduct\080
Feb 12 16:36:02 suse102vm kernel: usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
Feb 12 16:36:02 suse102vm kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 12 16:36:02 suse102vm udevd[891]: udev_event_run: seq 1495 forked, pid [4721], 'add' 'usb', 0 
seconds old
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup 
usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1 -o hotplug'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1 -o hotplug'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'HWDESC='usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1''
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'CONFIG='''
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'MODE=auto'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HOTPLUG=yes'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'SUBSYSTEM=usb'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'MODALIAS='
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSID=1-1'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'HWD_BUSID_0\000:00:07.2'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSID_1=usb1'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSID_2=1-1'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME=usb'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME_0=pci'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME_1=usb'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME_2=usb'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_BUS_N=3'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG='
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG_N=0'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVICEPATH=/sys/devices/pci0000:00/0000:00:07.2/usb1/1-1'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-1'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_DEVTYPE=usb'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_DRIVER=usb'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESC=usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_HWDESCTYPEÞvpath'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_ID\000:00:07.2'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'HWD_INTERFACE_N=0'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' (stderr) 'Device already 
bound to a driver'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hwup' returned with status 0
Feb 12 16:36:02 suse102vm udevd-event[4721]: pass_env_to_socket: passed 202 bytes to socket 
'/org/freedesktop/hal/udev_event',
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: 'eventrecorder.sh'
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/lib/udev/eventrecorder.sh' returned with 
status 0
Feb 12 16:36:02 suse102vm udevd-event[4721]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hotplugeventrecorder'
Feb 12 16:36:02 suse102vm udevd-event[4731]: run_program: exec of program 
'/sbin/hotplugeventrecorder' failed
Feb 12 16:36:02 suse102vm udevd-event[4721]: run_program: '/sbin/hotplugeventrecorder' returned with 
status 1
Feb 12 16:36:02 suse102vm udevd-event[4721]: udev_event_run: seq 1495 finished
Feb 12 16:36:02 suse102vm udevd[891]: udev_done: seq 1495, pid [4721] exit with 1, 0 seconds old
Feb 12 16:36:02 suse102vm udevd[891]: udev_event_run: seq 1496 forked, pid [4732], 'add' 
'usb_endpoint', 0 seconds old
Feb 12 16:36:02 suse102vm udevd[891]: udev_event_run: seq 1497 forked, pid [4733], 'add' 'usb', 0 
seconds old
Feb 12 16:36:02 suse102vm udevd-event[4732]: udev_rules_get_name: no node name set, will use kernel 
name 'usbdev1.20_ep00'
Feb 12 16:36:02 suse102vm udevd-event[4732]: udev_db_get_device: no db file to read 
/dev/.udev/db/devices@pci0000:00@0000:00:07.2@usb1@1-1@usbdev1.20_ep00: No such file or directory
Feb 12 16:36:02 suse102vm udevd-event[4732]: udev_node_add: creating device node 
'/dev/usbdev1.20_ep00', major = '442', minor = '19', mode = '0660', uid = '0', gid = '0'
Feb 12 16:36:02 suse102vm udevd-event[4732]: pass_env_to_socket: passed 247 bytes to socket 
'/org/freedesktop/hal/udev_event',
Feb 12 16:36:02 suse102vm udevd-event[4732]: run_program: 'eventrecorder.sh'
Feb 12 16:36:02 suse102vm udevd-event[4732]: run_program: '/lib/udev/eventrecorder.sh' returned with 
status 0
Feb 12 16:36:02 suse102vm udevd-event[4732]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:36:02 suse102vm udevd-event[4732]: run_program: '/sbin/hotplugeventrecorder'
Feb 12 16:36:02 suse102vm udevd-event[4735]: run_program: exec of program 
'/sbin/hotplugeventrecorder' failed
Feb 12 16:36:02 suse102vm udevd-event[4732]: run_program: '/sbin/hotplugeventrecorder' returned with 
status 1
Feb 12 16:36:02 suse102vm udevd-event[4732]: udev_event_run: seq 1496 finished
Feb 12 16:36:02 suse102vm udevd[891]: udev_done: seq 1496, pid [4732] exit with 1, 0 seconds old
Feb 12 16:36:02 suse102vm udevd-event[4733]: run_program: '/sbin/hwup 
usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0 -o hotplug'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0 -o hotplug'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'HWDESC='usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0''
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'CONFIG='''
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'MODE=auto'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HOTPLUG=yes'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'SUBSYSTEM=usb'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'MODALIAS=usb:v1275p0080d0001dcFFdscFFdpFFicFFiscFFipFF'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSID=1-1:1.0'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'HWD_BUSID_0\000:00:07.2'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSID_1=usb1'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSID_2=1-1'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSID_3=1-1:1.0'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME=usb'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME_0=pci'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME_1=usb'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME_2=usb'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUSNAME_3=usb'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_BUS_N=4'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG='
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_CONFIG_N=0'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVICEPATH=/sys/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'HWD_DEVPATH=/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_DEVTYPE=usb'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'HWD_HWDESC=usb-devpath-/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_HWDESCTYPEÞvpath'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_ID\000:00:07.2'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'HWD_INTERFACE_N=0'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 
'------------------------------------------------------------'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'executing modprobe 
usb:v1275p0080d0001dcFFdscFFdpFFicFFiscFFipFF'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stdout) 'FATAL: Module 
usb:v1275p0080d0001dcFFdscFFdpFFicFFiscFFipFF not found.'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' (stderr) 'Device still not 
bound to a driver'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hwup' returned with status 0
Feb 12 16:36:03 suse102vm udevd-event[4733]: pass_env_to_socket: passed 301 bytes to socket 
'/org/freedesktop/hal/udev_event',
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: 'eventrecorder.sh'
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/lib/udev/eventrecorder.sh' returned with 
status 0
Feb 12 16:36:03 suse102vm udevd-event[4733]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hotplugeventrecorder'
Feb 12 16:36:03 suse102vm udevd-event[4747]: run_program: exec of program 
'/sbin/hotplugeventrecorder' failed
Feb 12 16:36:03 suse102vm udevd-event[4733]: run_program: '/sbin/hotplugeventrecorder' returned with 
status 1
Feb 12 16:36:03 suse102vm udevd-event[4733]: udev_event_run: seq 1497 finished
Feb 12 16:36:03 suse102vm udevd[891]: udev_done: seq 1497, pid [4733] exit with 1, 1 seconds old
Feb 12 16:36:03 suse102vm udevd[891]: udev_event_run: seq 1498 forked, pid [4748], 'add' 
'usb_device', 1 seconds old
Feb 12 16:36:03 suse102vm udevd-event[4748]: run_program: '/bin/sh -c 'K=usbdev1.20; K=${K#usbdev}; 
printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
Feb 12 16:36:03 suse102vm udevd-event[4748]: run_program: '/bin/sh' (stdout) 'bus/usb/001/020'
Feb 12 16:36:03 suse102vm udevd-event[4748]: run_program: '/bin/sh' returned with status 0
Feb 12 16:36:03 suse102vm udevd-event[4748]: udev_rules_get_name: rule applied, 'usbdev1.20' becomes 
'bus/usb/001/020'
Feb 12 16:36:03 suse102vm udevd-event[4748]: udev_db_get_device: no db file to read 
/dev/.udev/db/class@usb_device@usbdev1.20: No such file or directory
Feb 12 16:36:03 suse102vm udevd-event[4748]: udev_node_add: creating device node 
'/dev/bus/usb/001/020', major = '189', minor = '19', mode = '0644', uid = '0', gid = '0'
Feb 12 16:36:03 suse102vm udevd-event[4748]: pass_env_to_socket: passed 274 bytes to socket 
'/org/freedesktop/hal/udev_event',
Feb 12 16:36:03 suse102vm udevd-event[4748]: run_program: 'eventrecorder.sh'
Feb 12 16:36:03 suse102vm udevd-event[4748]: run_program: '/lib/udev/eventrecorder.sh' returned with 
status 0
Feb 12 16:36:03 suse102vm udevd-event[4748]: pass_env_to_socket: passed -1 bytes to socket 
'/org/kernel/udev/monitor',
Feb 12 16:36:03 suse102vm udevd-event[4748]: run_program: '/sbin/hotplugeventrecorder'
Feb 12 16:36:03 suse102vm udevd-event[4751]: run_program: exec of program 
'/sbin/hotplugeventrecorder' failed
Feb 12 16:36:03 suse102vm udevd-event[4748]: run_program: '/sbin/hotplugeventrecorder' returned with 
status 1
Feb 12 16:36:03 suse102vm udevd-event[4748]: udev_event_run: seq 1498 finished
Feb 12 16:36:03 suse102vm udevd[891]: udev_done: seq 1498, pid [4748] exit with 1, 1 seconds old


-- 
Jonathan Selby
Director - Software Development
Xaxero Marine Software Engineering Ltd
at skype.com - xaxjon
Satellite Phone (00) 88163 101 3932
Cell Argentina  (54) 929 0160 2064
(00) 64 (0)9 412 7580 fax (00) 64 (0)9 412 7579
http://www.xaxero.com
Software for extending your horizon....

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: UDev Rules migration from 2.6.13 to 2.6.18

[Marco d'Itri]

On Feb 12, Jonathan Selby <jon@xaxero.com> wrote:

> And 10.2 that fails where FXLoad cannot find the proc/bus/usb node.
Fix fxload to use /dev/bus/usb/.

-- 
ciao,
Marco

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: UDev Rules migration from 2.6.13 to 2.6.18

[Matthias Schwarzott]

On Montag, 12. Februar 2007, Jonathan Selby wrote:
> Hello Team,
>       I am having trouble migrating my driver loading code from SuSE 10.0
> to SuSE 10.2
>
> It seems there is a fundamental way UDEV works from kernel to kernel.
>
> As a background, the device is a EZUSB that requires a firmware load via
> FXload
>
> I am including the rules:
>
>
> ENV{UDEV_LOG}="[4-9]", RUN+="/sbin/hotplugeventrecorder"
> KERNEL="sky0",   GROUP="users"
> ACTION="add",BUS="usb", ENV{PRODUCT}="1275/80/*", RUN+="/sbin/fxload -t
> fx -I /etc/hotplug/usb/ezusb.fw/isostrml.hex"
>

Perhaps it helps to add " -D %N" to the fxload call.

Greetings
Matthias Schwarzott

-- 
Matthias Schwarzott (zzam)

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: UDev Rules migration from 2.6.13 to 2.6.18

[Jonathan Selby]

Hi Matthias
      Tried that and got %N resolving to /dev/.tmp-0-0

This is not a node I can find.


It seems the proc bus entry is being created after the initial rule fails.

Bit lost here


Thanks Jonathan


Matthias Schwarzott wrote:
> On Montag, 12. Februar 2007, Jonathan Selby wrote:
> 
>>Hello Team,
>>      I am having trouble migrating my driver loading code from SuSE 10.0
>>to SuSE 10.2
>>
>>It seems there is a fundamental way UDEV works from kernel to kernel.
>>
>>As a background, the device is a EZUSB that requires a firmware load via
>>FXload
>>
>>I am including the rules:
>>
>>
>>ENV{UDEV_LOG}="[4-9]", RUN+="/sbin/hotplugeventrecorder"
>>KERNEL="sky0",   GROUP="users"
>>ACTION="add",BUS="usb", ENV{PRODUCT}="1275/80/*", RUN+="/sbin/fxload -t
>>fx -I /etc/hotplug/usb/ezusb.fw/isostrml.hex"
>>
> 
> 
> Perhaps it helps to add " -D %N" to the fxload call.
> 
> Greetings
> Matthias Schwarzott
> 

-- 
Jonathan Selby
Director - Software Development
Xaxero Marine Software Engineering Ltd
at skype.com - xaxjon
Satellite Phone (00) 88163 101 3932
Cell Argentina  (54) 929 0160 2064
(00) 64 (0)9 412 7580 fax (00) 64 (0)9 412 7579
http://www.xaxero.com
Software for extending your horizon....

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: UDev Rules migration from 2.6.13 to 2.6.18

[Kay Sievers]

On 2/12/07, Jonathan Selby <jon@xaxero.com> wrote:
> Hi Matthias
>       Tried that and got %N resolving to /dev/.tmp-0-0
>
> This is not a node I can find.
>
>
> It seems the proc bus entry is being created after the initial rule fails.

Hook into the "usb_device" event instead, it contains DEVNAME and has
the proper timing.

Kay

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: UDev Rules migration from 2.6.13 to 2.6.18

[Jonathan Selby]

That fixed it.

Many thanks -

  UDEV is so much nicer than DEVFS

Jonathan

Kay Sievers wrote:
> On 2/12/07, Jonathan Selby <jon@xaxero.com> wrote:
> 
>> Hi Matthias
>>       Tried that and got %N resolving to /dev/.tmp-0-0
>>
>> This is not a node I can find.
>>
>>
>> It seems the proc bus entry is being created after the initial rule 
>> fails.
> 
> 
> Hook into the "usb_device" event instead, it contains DEVNAME and has
> the proper timing.
> 
> Kay
> 

-- 
Jonathan Selby
Director - Software Development
Xaxero Marine Software Engineering Ltd
at skype.com - xaxjon
Satellite Phone (00) 88163 101 3932
Cell Argentina  (54) 929 0160 2064
(00) 64 (0)9 412 7580 fax (00) 64 (0)9 412 7579
http://www.xaxero.com
Software for extending your horizon....

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x120709&bid&3057&dat\x121642
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel