linux-hotplug.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Writing udev Rules by Daniel Drake (dsd) Version 0.72
@ 2007-09-18 18:16 Rick Pizzi
  2007-09-18 19:12 ` Robby Workman
  2007-09-18 19:21 ` Matthias Schwarzott
  0 siblings, 2 replies; 3+ messages in thread
From: Rick Pizzi @ 2007-09-18 18:16 UTC (permalink / raw)
  To: linux-hotplug


[-- Attachment #1.1: Type: text/plain, Size: 1015 bytes --]

Hi,
 I have been trying to  follow subject Daniel Drakes instructions on how 
to have  various devices on my Ubuntu Feisty system  mount with  
persistent names.  As an example the attached dmesgSDB file shows  my  
'U3 Cruzer  Micro'  as sdb. The udevSDB attached file shows the result 
of the command:
"*sudo udevinfo -a -p $(udevinfo -q path -n /dev/sdb)*". I note there is 
no  *SYSFS *attributes only *ATTRS*. Also there is no place that 
*BUS="usb" *shows up, only *KERNELS=="4.4"*. I have cobbled up a rule 
attached as *10-local.rules* which, of course, does not work when I 
re-boot my computer.  The attached file *udevtestSDB* mentions U3 Cruzer 
Micro so something is trying to work, I guess.

Can you help me by explaining what is going on here?  Why doesn't 
udevinfo show information  like Daniel's article shows?  How do I use 
the attributes from *usbview*?  Usbview shows information such as: 
Manufacturer: SanDisk Corporation, Product Id:5406 etc.

Thanks in advance for your help,

Rick P.





[-- Attachment #1.2: Type: text/html, Size: 1318 bytes --]

[-- Attachment #2: dmesgSDB --]
[-- Type: text/plain, Size: 500 bytes --]

[ 4147.836000] sdb: Write Protect is off
[ 4147.836000] sdb: Mode Sense: 03 00 00 00
[ 4147.836000] sdb: assuming drive cache: write through
[ 4147.836000] SCSI device sdb: 4001422 512-byte hdwr sectors (2049 MB)
[ 4147.836000] sdb: Write Protect is off
[ 4147.836000] sdb: Mode Sense: 03 00 00 00
[ 4147.836000] sdb: assuming drive cache: write through
[ 4147.836000]  sdb: sdb1
[ 4147.840000] sd 3:0:0:0: Attached scsi removable disk sdb
[ 4147.840000] sd 3:0:0:0: Attached scsi generic sg2 type 0

[-- Attachment #3: udevSDB --]
[-- Type: text/plain, Size: 4105 bytes --]


Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/block/sdb':
    KERNEL=="sdb"
    SUBSYSTEM=="block"
    DRIVER==""
    ATTR{stat}=="     327      505      868      260        0        0        0        0        0      228      260"
    ATTR{size}=="4001422"
    ATTR{removable}=="1"
    ATTR{range}=="16"
    ATTR{dev}=="8:16"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host3/target3:0:0/3:0:0:0':
    KERNELS=="3:0:0:0"
    SUBSYSTEMS=="scsi"
    DRIVERS=="sd"
    ATTRS{ioerr_cnt}=="0x1"
    ATTRS{iodone_cnt}=="0x2d6"
    ATTRS{iorequest_cnt}=="0x2d6"
    ATTRS{iocounterbits}=="32"
    ATTRS{timeout}=="30"
    ATTRS{state}=="running"
    ATTRS{rev}=="3.27"
    ATTRS{model}=="U3 Cruzer Micro "
    ATTRS{vendor}=="SanDisk "
    ATTRS{scsi_level}=="3"
    ATTRS{type}=="0"
    ATTRS{queue_type}=="none"
    ATTRS{queue_depth}=="1"
    ATTRS{device_blocked}=="0"
    ATTRS{max_sectors}=="240"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host3/target3:0:0':
    KERNELS=="target3:0:0"
    SUBSYSTEMS==""
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host3':
    KERNELS=="host3"
    SUBSYSTEMS==""
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0':
    KERNELS=="4-4:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb-storage"
    ATTRS{modalias}=="usb:v0781p5406d0010dc00dsc00dp00ic08isc06ip50"
    ATTRS{bInterfaceProtocol}=="50"
    ATTRS{bInterfaceSubClass}=="06"
    ATTRS{bInterfaceClass}=="08"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceNumber}=="00"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb4/4-4':
    KERNELS=="4-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{serial}=="0000160EF172FFE1"
    ATTRS{product}=="U3 Cruzer Micro"
    ATTRS{manufacturer}=="SanDisk Corporation"
    ATTRS{maxchild}=="0"
    ATTRS{version}==" 2.00"
    ATTRS{devnum}=="5"
    ATTRS{speed}=="480"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bcdDevice}=="0010"
    ATTRS{idProduct}=="5406"
    ATTRS{idVendor}=="0781"
    ATTRS{bMaxPower}=="200mA"
    ATTRS{bmAttributes}=="80"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{configuration}==""

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb4':
    KERNELS=="usb4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{serial}=="0000:00:1d.7"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{manufacturer}=="Linux 2.6.20-16-generic ehci_hcd"
    ATTRS{maxchild}=="6"
    ATTRS{version}==" 2.00"
    ATTRS{devnum}=="1"
    ATTRS{speed}=="480"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bDeviceProtocol}=="01"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bcdDevice}=="0206"
    ATTRS{idProduct}=="0000"
    ATTRS{idVendor}=="0000"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{configuration}==""

  looking at parent device '/devices/pci0000:00/0000:00:1d.7':
    KERNELS=="0000:00:1d.7"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{msi_bus}==""
    ATTRS{broken_parity_status}=="0"
    ATTRS{enable}=="1"
    ATTRS{modalias}=="pci:v00008086d000024CDsv00001028sd0000014Ebc0Csc03i20"
    ATTRS{local_cpus}=="ff"
    ATTRS{irq}=="11"
    ATTRS{class}=="0x0c0320"
    ATTRS{subsystem_device}=="0x014e"
    ATTRS{subsystem_vendor}=="0x1028"
    ATTRS{device}=="0x24cd"
    ATTRS{vendor}=="0x8086"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""


[-- Attachment #4: 10-local.rules --]
[-- Type: text/plain, Size: 236 bytes --]

##BUS=="usb", ATTRS{serial}=="DEF1031F4402", ATTRS{manufacturer}=="Cypress Semiconductor", NAME{all-partitions}=="IOGEAR"
KERNELS=="4-4",ATTRS{product}=="U3 Cruzer Micro", ATTRS{manufacturer}=="SanDisk Corporation", SYMLINK+="MICRO2GB"

[-- Attachment #5: udevtestSDB --]
[-- Type: text/plain, Size: 5108 bytes --]

parse_file: reading '/etc/udev/rules.d/00-init.rules' as rules file
parse_file: reading '/etc/udev/rules.d/05-options.rules' as rules file
parse_file: reading '/etc/udev/rules.d/10-local.rules' as rules file
parse_file: reading '/etc/udev/rules.d/20-names.rules' as rules file
parse_file: reading '/etc/udev/rules.d/25-dmsetup.rules' as rules file
parse_file: reading '/etc/udev/rules.d/25-iftab.rules' as rules file
parse_file: reading '/etc/udev/rules.d/30-cdrom_id.rules' as rules file
parse_file: reading '/etc/udev/rules.d/40-permissions.rules' as rules file
parse_file: reading '/etc/udev/rules.d/45-hplip.rules' as rules file
parse_file: reading '/etc/udev/rules.d/45-libgphoto2.rules' as rules file
parse_file: reading '/etc/udev/rules.d/45-libsane.rules' as rules file
parse_file: reading '/etc/udev/rules.d/50-xserver-xorg-input-wacom.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-libpisock.rules' as rules file
parse_file: reading '/etc/udev/rules.d/60-symlinks.rules' as rules file
parse_file: reading '/etc/udev/rules.d/65-persistent-input.rules' as rules file
parse_file: reading '/etc/udev/rules.d/65-persistent-storage.rules' as rules file
parse_file: reading '/etc/udev/rules.d/80-programs.rules' as rules file
parse_file: reading '/etc/udev/rules.d/85-alsa.rules' as rules file
parse_file: reading '/etc/udev/rules.d/85-brltty.rules' as rules file
parse_file: reading '/etc/udev/rules.d/85-hdparm.rules' as rules file
parse_file: reading '/etc/udev/rules.d/85-hplj10xx.rules' as rules file
parse_file: reading '/etc/udev/rules.d/85-hwclock.rules' as rules file
parse_file: reading '/etc/udev/rules.d/85-ifupdown.rules' as rules file
parse_file: reading '/etc/udev/rules.d/85-pcmcia.rules' as rules file
parse_file: reading '/etc/udev/rules.d/90-modprobe.rules' as rules file
parse_file: reading '/etc/udev/rules.d/95-hal.rules' as rules file
parse_file: reading '/etc/udev/rules.d/99-udevmonitor.rules' as rules file
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, if rules
match against subsystem specfic kernel event variables.

main: looking at device '/block/sdb' from subsystem 'block'
udev_rules_get_name: add symlink 'MICRO2GB'
run_program: 'usb_id -x'
run_program: '/lib/udev/usb_id' (stdout) 'ID_VENDOR=SanDisk'
run_program: '/lib/udev/usb_id' (stdout) 'ID_MODEL=U3_Cruzer_Micro'
run_program: '/lib/udev/usb_id' (stdout) 'ID_REVISION=3.27'
run_program: '/lib/udev/usb_id' (stdout) 'ID_SERIAL=SanDisk_U3_Cruzer_Micro_0000160EF172FFE1-0:0'
run_program: '/lib/udev/usb_id' (stdout) 'ID_SERIAL_SHORT=0000160EF172FFE1'
run_program: '/lib/udev/usb_id' (stdout) 'ID_TYPE=disk'
run_program: '/lib/udev/usb_id' (stdout) 'ID_INSTANCE=0:0'
run_program: '/lib/udev/usb_id' (stdout) 'ID_BUS=usb'
run_program: '/lib/udev/usb_id' returned with status 0
udev_rules_get_name: add symlink 'disk/by-id/usb-SanDisk_U3_Cruzer_Micro_0000160EF172FFE1-0:0'
run_program: 'path_id /block/sdb'
run_program: '/lib/udev/path_id' (stdout) 'ID_PATH=pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0'
run_program: '/lib/udev/path_id' returned with status 0
udev_rules_get_name: add symlink 'disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0'
udev_rules_get_name: no node name set, will use kernel name 'sdb'
udev_device_event: device '/block/sdb' already in database, cleanup
udev_node_add: creating device node '/dev/sdb', major = '8', minor = '16', mode = '0660', uid = '0', gid = '46'
udev_node_update_symlinks: update symlink 'MICRO2GB' of '/block/sdb'
udev_db_get_devices_by_name: no index directory '/dev/.udev/names/MICRO2GB': No such file or directory
update_link: found -1 devices with name 'MICRO2GB'
update_link: no reference left, remove 'MICRO2GB'
udev_node_update_symlinks: update symlink 'disk/by-id/usb-SanDisk_U3_Cruzer_Micro_0000160EF172FFE1-0:0' of '/block/sdb'
udev_db_get_devices_by_name: found index directory '/dev/.udev/names/disk%2fby-id%2fusb-SanDisk_U3_Cruzer_Micro_0000160EF172FFE1-0:0'
update_link: found 1 devices with name 'disk/by-id/usb-SanDisk_U3_Cruzer_Micro_0000160EF172FFE1-0:0'
update_link: found '/block/sdb' for 'disk/by-id/usb-SanDisk_U3_Cruzer_Micro_0000160EF172FFE1-0:0'
update_link: compare (our own) priority of '/block/sdb' 0 >= 0
update_link: 'disk/by-id/usb-SanDisk_U3_Cruzer_Micro_0000160EF172FFE1-0:0' with target 'sdb' has the highest priority 0, create it
udev_node_update_symlinks: update symlink 'disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0' of '/block/sdb'
udev_db_get_devices_by_name: found index directory '/dev/.udev/names/disk%2fby-path%2fpci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0'
update_link: found 1 devices with name 'disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0'
update_link: found '/block/sdb' for 'disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0'
update_link: compare (our own) priority of '/block/sdb' 0 >= 0
update_link: 'disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0' with target 'sdb' has the highest priority 0, create it
main: run: 'socket:/org/freedesktop/hal/udev_event'
main: run: 'socket:/org/kernel/udev/monitor'

[-- Attachment #6: Type: text/plain, Size: 228 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[-- Attachment #7: Type: text/plain, Size: 226 bytes --]

_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-09-18 19:21 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-18 18:16 Writing udev Rules by Daniel Drake (dsd) Version 0.72 Rick Pizzi
2007-09-18 19:12 ` Robby Workman
2007-09-18 19:21 ` Matthias Schwarzott

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).