* problems with scsi device id and scsi_id
@ 2007-11-30 15:45 Matt Harrington
0 siblings, 0 replies; only message in thread
From: Matt Harrington @ 2007-11-30 15:45 UTC (permalink / raw)
To: linux-hotplug
I have been using multipath for some time to handle fibre connections to
my san. After upgrading the systems to centos5 (from centos4),
multipathing ceased to work because of changes in udev and the unique
ids returned by scsi_id. This change happened between versions 077 and 078.
In version 077, both paths return the same id:
[root@sys-app101 ~]# udev-077/extras/scsi_id/scsi_id -g -u -s /block/sdg
36000402001fc11026fdcd8b200000000
[root@sys-app101 ~]# udev-077/extras/scsi_id/scsi_id -g -u -s /block/sdw
36000402001fc11026fdcd8b200000000
In version 078, the paths return different ids:
[root@sys-app101 ~]# udev-078/extras/scsi_id/scsi_id -g -u -s /block/sdg
3010383106000402001fc11026fdcd8b2000000000114460402000000
[root@sys-app101 ~]# udev-078/extras/scsi_id/scsi_id -g -u -s /block/sdw
3010383106000402001fc11026fdcd8b2000000000114460401000000
This is a problem because multipath uses `/sbin/scsi_id -g -u -s
/block/%n' to probe each path for a particular device. Is this an
intentional change of behavior and is there a new/better way to identify
two paths pointing to the same device? Is there any consequence of
replacing my system scsi_id binary (095) with one build from an older
version of udev? System info follows.
Thanks in advance,
Matt Harrington
[root@sys-app101 udev-078]# uname -a
Linux sys-app101.eons.dev 2.6.18-8.1.10.el5.centos.plus #1 SMP Tue Sep
18 05:08:16 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
[root@sys-app101 ~]# cat /etc/udev/udev.conf
# udev.conf
# The initial syslog(3) priority: "err", "info", "debug" or its
# numerical equivalent. For runtime debugging, the daemons internal
# state can be changed with: "udevcontrol log_priority=<value>".
udev_log="err"
[root@sys-app101 ~]# cat /etc/scsi_id.config
#
# scsi_id configuration
#
# lower or upper case has no affect on the left side. Quotes (") are
# required for spaces in values. Model is the same as the SCSI
# INQUIRY product identification field. Per the SCSI INQUIRY, the vendor
# is limited to 8 bytes, model to 16 bytes.
#
# The first matching line found is used. Short matches match longer ones,
# if you do not want such a match space fill the extra bytes. If no model
# is specified, only the vendor string need match.
#
# options=<any scsi_id command line options>
# vendor=string[,model=string],options=<per-device scsi_id options>
# some libata drives require vpd page 0x80
vendor="ATA",options=-p 0x80
[root@sys-app101 ~]# udev-077/extras/scsi_id/scsi_id -v -g -u -s /block/sdg
set_options: option 'g'
set_options: option 'u'
set_options: option 's' arg '/block/sdg'
scsi_id: target_path /sys/block/sdg
scsi_id: class_dev 0x0xbfb0010; class_dev_parent 0x(nil)
create_tmp_dev: (sdg)
get_major_minor: dev value 8:96
create_tmp_dev: tmpdev '/dev/tmp-scsi-maj8-min96-17247'
get_file_options: vendor='NEXSAN
'; model='SATABeast
'
get_file_options: config file line 17: vendor 'ATA'; model '(null)';
options '-p 0x80'
get_file_options: no match
scsi_id: per dev options: good 1; page code 0x0; callout ''
scsi_id: buffer unaligned 0x0xbfb0c90; aligned 0x0xbfb0e00
scsi_get_serial: opening /dev/tmp-scsi-maj8-min96-17247
scsi_inquiry: 1:0:0:10 evpd 1, page 0x0
scsi_get_serial: 1:0:0:10: Checking page0
scsi_inquiry: 1:0:0:10 evpd 1, page 0x83
do_scsi_page83_inquiry: 1:0:0:10 id desc 3/6/1
do_scsi_page83_inquiry: used
36000402001fc11026fdcd8b200000000
scsi_id: 36000402001fc11026fdcd8b200000000
[root@sys-app101 ~]# udev-077/extras/scsi_id/scsi_id -v -g -u -s /block/sdw
set_options: option 'g'
set_options: option 'u'
set_options: option 's' arg '/block/sdw'
scsi_id: target_path /sys/block/sdw
scsi_id: class_dev 0x0x10567010; class_dev_parent 0x(nil)
create_tmp_dev: (sdw)
get_major_minor: dev value 65:96
create_tmp_dev: tmpdev '/dev/tmp-scsi-maj65-min96-17248'
get_file_options: vendor='NEXSAN
'; model='SATABeast
'
get_file_options: config file line 17: vendor 'ATA'; model '(null)';
options '-p 0x80'
get_file_options: no match
scsi_id: per dev options: good 1; page code 0x0; callout ''
scsi_id: buffer unaligned 0x0x10567c90; aligned 0x0x10567e00
scsi_get_serial: opening /dev/tmp-scsi-maj65-min96-17248
scsi_inquiry: 2:0:2:10 evpd 1, page 0x0
scsi_get_serial: 2:0:2:10: Checking page0
scsi_inquiry: 2:0:2:10 evpd 1, page 0x83
do_scsi_page83_inquiry: 2:0:2:10 id desc 3/6/1
do_scsi_page83_inquiry: used
36000402001fc11026fdcd8b200000000
scsi_id: 36000402001fc11026fdcd8b200000000
[root@sys-app101 ~]# udev-078/extras/scsi_id/scsi_id -v -g -u -s /block/sdg
set_options: option 'g'
set_options: option 'u'
set_options: option 's' arg '/block/sdg'
scsi_id: target_path /sys/block/sdg
scsi_id: class_dev 0x0x3d9b010; class_dev_parent 0x(nil)
create_tmp_dev: (sdg)
get_major_minor: dev value 8:96
create_tmp_dev: tmpdev '/dev/tmp-scsi-maj8-min96-17249'
get_file_options: vendor='NEXSAN
'; model='SATABeast
'
get_file_options: config file line 17: vendor 'ATA'; model '(null)';
options '-p 0x80'
get_file_options: no match
scsi_id: per dev options: good 1; page code 0x0; callout ''
scsi_id: buffer unaligned 0x0x3d9bc90; aligned 0x0x3d9be00
scsi_get_serial: opening /dev/tmp-scsi-maj8-min96-17249
scsi_inquiry: 1:0:0:10 evpd 1, page 0x0
scsi_get_serial: 1:0:0:10: Checking page0
scsi_inquiry: 1:0:0:10 evpd 1, page 0x83
check_fill_0x83_prespc3: using pre-spc3-83 for 1:0:0:10.
3010383106000402001fc11026fdcd8b2000000000114460402000000
scsi_id: 3010383106000402001fc11026fdcd8b2000000000114460402000000
[root@sys-app101 ~]# udev-078/extras/scsi_id/scsi_id -v -g -u -s /block/sdw
set_options: option 'g'
set_options: option 'u'
set_options: option 's' arg '/block/sdw'
scsi_id: target_path /sys/block/sdw
scsi_id: class_dev 0x0xce8d010; class_dev_parent 0x(nil)
create_tmp_dev: (sdw)
get_major_minor: dev value 65:96
create_tmp_dev: tmpdev '/dev/tmp-scsi-maj65-min96-17250'
get_file_options: vendor='NEXSAN
'; model='SATABeast
'
get_file_options: config file line 17: vendor 'ATA'; model '(null)';
options '-p 0x80'
get_file_options: no match
scsi_id: per dev options: good 1; page code 0x0; callout ''
scsi_id: buffer unaligned 0x0xce8dc90; aligned 0x0xce8de00
scsi_get_serial: opening /dev/tmp-scsi-maj65-min96-17250
scsi_inquiry: 2:0:2:10 evpd 1, page 0x0
scsi_get_serial: 2:0:2:10: Checking page0
scsi_inquiry: 2:0:2:10 evpd 1, page 0x83
check_fill_0x83_prespc3: using pre-spc3-83 for 2:0:2:10.
3010383106000402001fc11026fdcd8b2000000000114460401000000
scsi_id: 3010383106000402001fc11026fdcd8b2000000000114460401000000
-------------------------------------------------------------------------
SF.Net email is sponsored by: The Future of Linux Business White Paper
from Novell. From the desktop to the data center, Linux is going
mainstream. Let it simplify your IT future.
http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-11-30 15:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-30 15:45 problems with scsi device id and scsi_id Matt Harrington
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).