From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Brownell Date: Thu, 04 Oct 2001 01:10:42 +0000 Subject: Re: multiple devices behind a cardbus bridge (adding magma pci Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org > he said that currently linux only supports adding a single > device behind a cardbus bridge. Is the root problem that drivers/pcmcia/cardbus.c doesn't set up bridge devices when they're connected to the Cardbus bridge? Or is it perhaps that something in drivers/pci/* isn't doing what's expected? Once that bridge is hooked up, I'd expect it to hotplug cards on that bus just like any other PCI device; that's generic code. The info I noticed at www.magma.com doesn't suggest you'd need to worry about the sort of per-slot poweron/poweroff handshaking that designs like "CompactPCI" or "Hotplug PCI" systems do. - Dave _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel