From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Thu, 04 Oct 2001 15:24:05 +0000 Subject: Re: multiple devices behind a cardbus bridge (adding magma pci extender support) Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Wed, Oct 03, 2001 at 09:18:54PM -0700, David Hinds wrote: > On Wed, Oct 03, 2001 at 06:10:42PM -0700, David Brownell wrote: > > > > Is the root problem that drivers/pcmcia/cardbus.c > > doesn't set up bridge devices when they're connected > > to the Cardbus bridge? > > This is it. The cardbus code will configure a single normal device on > the far side of the cardbus bridge, not (potentially) a whole tree of > things. It is similar to the hot plug PCI situation. But for hotplug PCI, you need a hotplug pci controller that handles the initialization of that pci tree (among other things). For this device, does it have a controller that can be addressed to do these things? thanks, greg k-h _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel