From mboxrd@z Thu Jan 1 00:00:00 1970 From: christophe barbe Date: Wed, 10 Oct 2001 20:55:33 +0000 Subject: Adaptec SlimSCSI 1480A Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-hotplug@vger.kernel.org Hi, I am trying the hotplug facilities. If I understand it correctly, the kernel call a user space tool which is then in charge of loading drivers for the just plugged device. Then kernel supporting the hotplug API are used (drivers providing standby/resume). Cardbus card are usable without pcmcia stuff. I've a kernel 2.4.11 with hotplug support enabled. I own a laptop Toshiba 2520cds with a pcmcia/cardbus slot and two cardbus cards : a 3com Megahertz 10/100 lan and an adaptec SlimSCCI 1480A. The first one is well managed by hotplug. The correct driver is loaded and the network interface is configured. But the second one is not detected. Nothing is written in /var/log/message and on the console when I insert my scsi card. Is there some debugging tools ? With pcmcia, the correct driver was apa1480 but if I have correctly understood the driver with hotplug is aic7xxx. My card works with pcmcia but only when inserted before booting. Christophe --=20 Christophe Barb=E9 GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel