From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Randy.Dunlap" Date: Mon, 18 Mar 2002 18:52:21 +0000 Subject: Re: Can HotPlug replace cardmgr ? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org dhinds wrote: | On Mon, Mar 18, 2002 at 10:18:20AM +0100, Christian Gennerat wrote: | > The problem is that i have an ieee1394 cardbus card using ohci1394 | > driver. | > This pcmcia driver is not supported since 2.4.8 kernel. | > | > So, can I deactivate all the PCMCIA management, cardmgr and all the | > config files, and use hotplug instead. | | No. There is no hotplug support for 16-bit PCMCIA cards. Dave- You mean that there is not current support, right? And not that it couldn't be done? ~Randy | > Now I use PCMCIA drivers for: | > -floppy (floppy_cs) | > -Network ("xirc2ps_cs or pcnet_cs) | > -SCSI (aha152x_cs) | > -IDE disk (ide-cs) | > -firewire (ohci1394_cb) | | You can use a hot plug PCI driver for your firewire card. That's all. _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel