* Can HotPlug replace cardmgr ?
@ 2002-03-18 9:18 Christian Gennerat
2002-03-18 18:32 ` dhinds
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Christian Gennerat @ 2002-03-18 9:18 UTC (permalink / raw)
To: linux-hotplug
The problem is that i have an ieee1394 cardbus card using ohci1394 driver.
This pcmcia driver is not supported since 2.4.8 kernel.
So, can I deactivate all the PCMCIA management, cardmgr and all the config files,
and use hotplug instead.
Now I use PCMCIA drivers for:
-floppy (floppy_cs)
-Network ("xirc2ps_cs or pcnet_cs)
-SCSI (aha152x_cs)
-IDE disk (ide-cs)
-firewire (ohci1394_cb)
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Can HotPlug replace cardmgr ?
2002-03-18 9:18 Can HotPlug replace cardmgr ? Christian Gennerat
@ 2002-03-18 18:32 ` dhinds
2002-03-18 18:52 ` Randy.Dunlap
2002-03-18 18:59 ` dhinds
2 siblings, 0 replies; 4+ messages in thread
From: dhinds @ 2002-03-18 18:32 UTC (permalink / raw)
To: linux-hotplug
On Mon, Mar 18, 2002 at 10:18:20AM +0100, Christian Gennerat wrote:
> The problem is that i have an ieee1394 cardbus card using ohci1394 driver.
> This pcmcia driver is not supported since 2.4.8 kernel.
>
> So, can I deactivate all the PCMCIA management, cardmgr and all the
> config files, and use hotplug instead.
No. There is no hotplug support for 16-bit PCMCIA cards.
> Now I use PCMCIA drivers for:
> -floppy (floppy_cs)
> -Network ("xirc2ps_cs or pcnet_cs)
> -SCSI (aha152x_cs)
> -IDE disk (ide-cs)
> -firewire (ohci1394_cb)
You can use a hot plug PCI driver for your firewire card. That's all.
-- Dave
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Can HotPlug replace cardmgr ?
2002-03-18 9:18 Can HotPlug replace cardmgr ? Christian Gennerat
2002-03-18 18:32 ` dhinds
@ 2002-03-18 18:52 ` Randy.Dunlap
2002-03-18 18:59 ` dhinds
2 siblings, 0 replies; 4+ messages in thread
From: Randy.Dunlap @ 2002-03-18 18:52 UTC (permalink / raw)
To: linux-hotplug
dhinds wrote:
| On Mon, Mar 18, 2002 at 10:18:20AM +0100, Christian Gennerat wrote:
| > The problem is that i have an ieee1394 cardbus card using ohci1394
| > driver.
| > This pcmcia driver is not supported since 2.4.8 kernel.
| >
| > So, can I deactivate all the PCMCIA management, cardmgr and all the
| > config files, and use hotplug instead.
|
| No. There is no hotplug support for 16-bit PCMCIA cards.
Dave-
You mean that there is not current support, right?
And not that it couldn't be done?
~Randy
| > Now I use PCMCIA drivers for:
| > -floppy (floppy_cs)
| > -Network ("xirc2ps_cs or pcnet_cs)
| > -SCSI (aha152x_cs)
| > -IDE disk (ide-cs)
| > -firewire (ohci1394_cb)
|
| You can use a hot plug PCI driver for your firewire card. That's all.
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Can HotPlug replace cardmgr ?
2002-03-18 9:18 Can HotPlug replace cardmgr ? Christian Gennerat
2002-03-18 18:32 ` dhinds
2002-03-18 18:52 ` Randy.Dunlap
@ 2002-03-18 18:59 ` dhinds
2 siblings, 0 replies; 4+ messages in thread
From: dhinds @ 2002-03-18 18:59 UTC (permalink / raw)
To: linux-hotplug
On Mon, Mar 18, 2002 at 10:52:21AM -0800, Randy.Dunlap wrote:
> dhinds wrote:
>
> | On Mon, Mar 18, 2002 at 10:18:20AM +0100, Christian Gennerat wrote:
> | > The problem is that i have an ieee1394 cardbus card using ohci1394
> | > driver.
> | > This pcmcia driver is not supported since 2.4.8 kernel.
> | >
> | > So, can I deactivate all the PCMCIA management, cardmgr and all the
> | > config files, and use hotplug instead.
> |
> | No. There is no hotplug support for 16-bit PCMCIA cards.
>
> Dave-
> You mean that there is not current support, right?
> And not that it couldn't be done?
Sure, it could be done.
-- Dave
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2002-03-18 18:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-03-18 9:18 Can HotPlug replace cardmgr ? Christian Gennerat
2002-03-18 18:32 ` dhinds
2002-03-18 18:52 ` Randy.Dunlap
2002-03-18 18:59 ` dhinds
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).