From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?q?Ajay?= Date: Wed, 28 Aug 2002 04:13:04 +0000 Subject: Re: config questions Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org > > and in /etc/hotplug/interfaces reacted to the > arguments registered and > > derigistered to do what I needed for /dev/usb0 > > There's no such thing as /dev/usb0! :) Is this the usb hub? I can't find usb0 in my system either(RHL 7.3), but /proc/devices lists "180 usb". I tried mknod /dev/usb/hub c 180 0 but it didn't seem to point to the hub ('open' failed : "No such device"). What is the device file for the USB-UHCI hub? AFAICS hotplug checks the file /proc/bus/usb/devices. Why not communicate with the hub directly using ioctl calls? Thanks and regards -Ajay __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com ------------------------------------------------------- This sf.net email is sponsored by: Jabber - The world's fastest growing real-time communications platform! Don't just IM. Build it in! http://www.jabber.com/osdn/xim _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel