help for loading pwc module

[Beffe <beffe@beffe.de>]

Hi List,

first thanks for your great work on hotplug, i like it.

Now i have a Philips Webcam, the PCVC680K "Vesta Pro" and i don't know
how to tell hotplug to load the pwc module.

when i plug it in, hotplug says: 
{syslog}/etc/hotplug/usb.agent: ... no modules for USB product 471/308/6

the entry in /proc/bus/usb/devices looks like this:

T:  Bus\x01 Lev\x02 Prnt\x02 Port\x03 Cnt\x02 Dev#=  6 Spd\x12  MxCh= 0
D:  Ver= 1.10 Cls\0(>ifc ) Sub\0 Prot\0 MxPS= 8 #Cfgs=  1
P:  Vendor\x0471 ProdID\x0308 Rev= 0.06
S:  SerialNumber\x02130211A0105BF5
C:* #Ifs= 3 Cfg#= 1 Atr  MxPwrP0mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 0 Alt= 1 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 196 Ivl=1ms
I:  If#= 0 Alt= 2 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 292 Ivl=1ms
I:  If#= 0 Alt= 3 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 448 Ivl=1ms
I:  If#= 0 Alt= 4 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 592 Ivl=1ms
I:  If#= 0 Alt= 5 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 704 Ivl=1ms
I:  If#= 0 Alt= 6 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 776 Ivl=1ms
I:  If#= 0 Alt= 7 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 840 Ivl=1ms
I:  If#= 0 Alt= 8 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 896 Ivl=1ms
I:  If#= 0 Alt= 9 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E:  Ad‚(I) Atr\x03(Int.) MxPS=   1 Ivl\x100ms
E:  Ad„(I) Atr\x01(Isoc) MxPS= 960 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls\x01(audio) Sub\x01 Prot\0 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E:  Ad…(I) Atr\x05(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 2 Alt= 1 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E:  Ad…(I) Atr\x05(Isoc) MxPS=  90 Ivl=1ms
I:  If#= 2 Alt= 2 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E:  Ad…(I) Atr\x05(Isoc) MxPS=  46 Ivl=1ms
I:  If#= 2 Alt= 3 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E:  Ad…(I) Atr\x05(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 2 Alt= 4 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E:  Ad…(I) Atr\x05(Isoc) MxPS=  16 Ivl=1ms

now i tried several lines in usb.distmap, usb.handmap and usb.usermap,
the last try was:
pwc                  0x0003 0x0471   0x0308    0x0000       0x0000      
0x00         0x00            0x00            0x00            0x00
  0x00         0x00000000

but nothing worked. Always " ... no modules for USB product 471/308/6"

Can anybody tell me the right line??
Thanks in advance.

Just for understanding:
this line in usb.distmap would try to load the pwc kernel module, while
this line in usb.usermap would execute a script called
/etc/hotplub/usb/pwc ? is this right? i have this script but it is not
executed.

What are these parameters, especially the match_flags?

It would be great if one could help.
Bye,
Beffe





-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone?  Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel