* help for loading pwc module
@ 2002-08-30 21:51 Beffe
0 siblings, 0 replies; 2+ messages in thread
From: Beffe @ 2002-08-30 21:51 UTC (permalink / raw)
To: linux-hotplug
Hi List,
first thanks for your great work on hotplug, i like it.
Now i have a Philips Webcam, the PCVC680K "Vesta Pro" and i don't know
how to tell hotplug to load the pwc module.
when i plug it in, hotplug says:
{syslog}/etc/hotplug/usb.agent: ... no modules for USB product 471/308/6
the entry in /proc/bus/usb/devices looks like this:
T: Bus\x01 Lev\x02 Prnt\x02 Port\x03 Cnt\x02 Dev#= 6 Spd\x12 MxCh= 0
D: Ver= 1.10 Cls\0(>ifc ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
P: Vendor\x0471 ProdID\x0308 Rev= 0.06
S: SerialNumber\x02130211A0105BF5
C:* #Ifs= 3 Cfg#= 1 Atr MxPwrP0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 196 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 292 Ivl=1ms
I: If#= 0 Alt= 3 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 448 Ivl=1ms
I: If#= 0 Alt= 4 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 592 Ivl=1ms
I: If#= 0 Alt= 5 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 704 Ivl=1ms
I: If#= 0 Alt= 6 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 776 Ivl=1ms
I: If#= 0 Alt= 7 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 840 Ivl=1ms
I: If#= 0 Alt= 8 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 896 Ivl=1ms
I: If#= 0 Alt= 9 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
E: Ad„(I) Atr\x01(Isoc) MxPS= 960 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 0 Cls\x01(audio) Sub\x01 Prot\0 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E: Ad…(I) Atr\x05(Isoc) MxPS= 0 Ivl=1ms
I: If#= 2 Alt= 1 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E: Ad…(I) Atr\x05(Isoc) MxPS= 90 Ivl=1ms
I: If#= 2 Alt= 2 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E: Ad…(I) Atr\x05(Isoc) MxPS= 46 Ivl=1ms
I: If#= 2 Alt= 3 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E: Ad…(I) Atr\x05(Isoc) MxPS= 25 Ivl=1ms
I: If#= 2 Alt= 4 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
E: Ad…(I) Atr\x05(Isoc) MxPS= 16 Ivl=1ms
now i tried several lines in usb.distmap, usb.handmap and usb.usermap,
the last try was:
pwc 0x0003 0x0471 0x0308 0x0000 0x0000
0x00 0x00 0x00 0x00 0x00
0x00 0x00000000
but nothing worked. Always " ... no modules for USB product 471/308/6"
Can anybody tell me the right line??
Thanks in advance.
Just for understanding:
this line in usb.distmap would try to load the pwc kernel module, while
this line in usb.usermap would execute a script called
/etc/hotplub/usb/pwc ? is this right? i have this script but it is not
executed.
What are these parameters, especially the match_flags?
It would be great if one could help.
Bye,
Beffe
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: help for loading pwc module
@ 2002-09-03 20:25 Beffe
0 siblings, 0 replies; 2+ messages in thread
From: Beffe @ 2002-09-03 20:25 UTC (permalink / raw)
To: linux-hotplug
Hi all,
at least i would have expected an RTFM or something. But nothing. OK. I
did some more debugging and found out, that usbmodules on the webcam
device takes some seconds and then gives a "cannot get config descriptor
0, Connection timed out (110)"
Does anybody (if there is someone) know what that means and what i can
do to help usbmodules to find the right driver?
Also, where can i find this shell script "usb_map_modules"? Maybe that
would find my driver.
I would be really greatful for any help.
Thanks,
Beffe
Am Fre, 2002-08-30 um 23.51 schrieb Beffe:
>
>
> Hi List,
>
> first thanks for your great work on hotplug, i like it.
>
> Now i have a Philips Webcam, the PCVC680K "Vesta Pro" and i don't know
> how to tell hotplug to load the pwc module.
>
> when i plug it in, hotplug says:
> {syslog}/etc/hotplug/usb.agent: ... no modules for USB product 471/308/6
>
> the entry in /proc/bus/usb/devices looks like this:
>
> T: Bus\x01 Lev\x02 Prnt\x02 Port\x03 Cnt\x02 Dev#= 6 Spd\x12 MxCh= 0
> D: Ver= 1.10 Cls\0(>ifc ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
> P: Vendor\x0471 ProdID\x0308 Rev= 0.06
> S: SerialNumber\x02130211A0105BF5
> C:* #Ifs= 3 Cfg#= 1 Atr MxPwrP0mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 0 Alt= 1 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 196 Ivl=1ms
> I: If#= 0 Alt= 2 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 292 Ivl=1ms
> I: If#= 0 Alt= 3 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 448 Ivl=1ms
> I: If#= 0 Alt= 4 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 592 Ivl=1ms
> I: If#= 0 Alt= 5 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 704 Ivl=1ms
> I: If#= 0 Alt= 6 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 776 Ivl=1ms
> I: If#= 0 Alt= 7 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 840 Ivl=1ms
> I: If#= 0 Alt= 8 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 896 Ivl=1ms
> I: If#= 0 Alt= 9 #EPs= 2 Cls
(data ) Subÿ Prot\0 Driver=(none)
> E: Ad‚(I) Atr\x03(Int.) MxPS= 1 Ivl\x100ms
> E: Ad„(I) Atr\x01(Isoc) MxPS= 960 Ivl=1ms
> I: If#= 1 Alt= 0 #EPs= 0 Cls\x01(audio) Sub\x01 Prot\0 Driver=(none)
> I: If#= 2 Alt= 0 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
> E: Ad…(I) Atr\x05(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 2 Alt= 1 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
> E: Ad…(I) Atr\x05(Isoc) MxPS= 90 Ivl=1ms
> I: If#= 2 Alt= 2 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
> E: Ad…(I) Atr\x05(Isoc) MxPS= 46 Ivl=1ms
> I: If#= 2 Alt= 3 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
> E: Ad…(I) Atr\x05(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 2 Alt= 4 #EPs= 1 Cls\x01(audio) Sub\x02 Prot\0 Driver=(none)
> E: Ad…(I) Atr\x05(Isoc) MxPS= 16 Ivl=1ms
>
> now i tried several lines in usb.distmap, usb.handmap and usb.usermap,
> the last try was:
> pwc 0x0003 0x0471 0x0308 0x0000 0x0000
> 0x00 0x00 0x00 0x00 0x00
> 0x00 0x00000000
>
> but nothing worked. Always " ... no modules for USB product 471/308/6"
>
> Can anybody tell me the right line??
> Thanks in advance.
>
> Just for understanding:
> this line in usb.distmap would try to load the pwc kernel module, while
> this line in usb.usermap would execute a script called
> /etc/hotplub/usb/pwc ? is this right? i have this script but it is not
> executed.
>
> What are these parameters, especially the match_flags?
>
> It would be great if one could help.
> Bye,
> Beffe
>
>
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by: OSDN - Tired of that same old
> cell phone? Get a new here for FREE!
> https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
> _______________________________________________
> Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
> Linux-hotplug-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-09-03 20:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-09-03 20:25 help for loading pwc module Beffe
-- strict thread matches above, loose matches on Subject: below --
2002-08-30 21:51 Beffe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).