From mboxrd@z Thu Jan 1 00:00:00 1970 From: Beffe Date: Tue, 03 Sep 2002 20:25:36 +0000 Subject: Re: help for loading pwc module Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: linux-hotplug@vger.kernel.org Hi all, at least i would have expected an RTFM or something. But nothing. OK. I did some more debugging and found out, that usbmodules on the webcam device takes some seconds and then gives a "cannot get config descriptor 0, Connection timed out (110)" Does anybody (if there is someone) know what that means and what i can do to help usbmodules to find the right driver? Also, where can i find this shell script "usb_map_modules"? Maybe that would find my driver. I would be really greatful for any help. Thanks, Beffe Am Fre, 2002-08-30 um 23.51 schrieb Beffe: >=20 >=20 > Hi List, >=20 > first thanks for your great work on hotplug, i like it. >=20 > Now i have a Philips Webcam, the PCVC680K "Vesta Pro" and i don't know > how to tell hotplug to load the pwc module. >=20 > when i plug it in, hotplug says:=20 > {syslog}/etc/hotplug/usb.agent: ... no modules for USB product 471/308/6 >=20 > the entry in /proc/bus/usb/devices looks like this: >=20 > T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=3D 6 Spd=12 MxCh=3D 0 > D: Ver=3D 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=3D 8 #Cfgs=3D 1 > P: Vendor=0471 ProdID=0308 Rev=3D 0.06 > S: SerialNumber=02130211A0105BF5 > C:* #Ifs=3D 3 Cfg#=3D 1 Atr=A0 MxPwrP0mA > I: If#=3D 0 Alt=3D 0 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 0 Ivl=3D1ms > I: If#=3D 0 Alt=3D 1 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 196 Ivl=3D1ms > I: If#=3D 0 Alt=3D 2 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 292 Ivl=3D1ms > I: If#=3D 0 Alt=3D 3 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 448 Ivl=3D1ms > I: If#=3D 0 Alt=3D 4 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 592 Ivl=3D1ms > I: If#=3D 0 Alt=3D 5 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 704 Ivl=3D1ms > I: If#=3D 0 Alt=3D 6 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 776 Ivl=3D1ms > I: If#=3D 0 Alt=3D 7 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 840 Ivl=3D1ms > I: If#=3D 0 Alt=3D 8 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 896 Ivl=3D1ms > I: If#=3D 0 Alt=3D 9 #EPs=3D 2 Cls (data ) Sub=FF Prot=00 Driver=3D(none) > E: Ad=82(I) Atr=03(Int.) MxPS=3D 1 Ivl=100ms > E: Ad=84(I) Atr=01(Isoc) MxPS=3D 960 Ivl=3D1ms > I: If#=3D 1 Alt=3D 0 #EPs=3D 0 Cls=01(audio) Sub=01 Prot=00 Driver=3D(no= ne) > I: If#=3D 2 Alt=3D 0 #EPs=3D 1 Cls=01(audio) Sub=02 Prot=00 Driver=3D(no= ne) > E: Ad=85(I) Atr=05(Isoc) MxPS=3D 0 Ivl=3D1ms > I: If#=3D 2 Alt=3D 1 #EPs=3D 1 Cls=01(audio) Sub=02 Prot=00 Driver=3D(no= ne) > E: Ad=85(I) Atr=05(Isoc) MxPS=3D 90 Ivl=3D1ms > I: If#=3D 2 Alt=3D 2 #EPs=3D 1 Cls=01(audio) Sub=02 Prot=00 Driver=3D(no= ne) > E: Ad=85(I) Atr=05(Isoc) MxPS=3D 46 Ivl=3D1ms > I: If#=3D 2 Alt=3D 3 #EPs=3D 1 Cls=01(audio) Sub=02 Prot=00 Driver=3D(no= ne) > E: Ad=85(I) Atr=05(Isoc) MxPS=3D 25 Ivl=3D1ms > I: If#=3D 2 Alt=3D 4 #EPs=3D 1 Cls=01(audio) Sub=02 Prot=00 Driver=3D(no= ne) > E: Ad=85(I) Atr=05(Isoc) MxPS=3D 16 Ivl=3D1ms >=20 > now i tried several lines in usb.distmap, usb.handmap and usb.usermap, > the last try was: > pwc 0x0003 0x0471 0x0308 0x0000 0x0000 =20 > 0x00 0x00 0x00 0x00 0x00 > 0x00 0x00000000 >=20 > but nothing worked. Always " ... no modules for USB product 471/308/6" >=20 > Can anybody tell me the right line?? > Thanks in advance. >=20 > Just for understanding: > this line in usb.distmap would try to load the pwc kernel module, while > this line in usb.usermap would execute a script called > /etc/hotplub/usb/pwc ? is this right? i have this script but it is not > executed. >=20 > What are these parameters, especially the match_flags? >=20 > It would be great if one could help. > Bye, > Beffe >=20 >=20 >=20 >=20 >=20 > ------------------------------------------------------- > This sf.net email is sponsored by: OSDN - Tired of that same old > cell phone? Get a new here for FREE! > https://www.inphonic.com/r.asp?r=3Dsourceforge1&refcode1=3Dvs3390 > _______________________________________________ > Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net > Linux-hotplug-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=3Dsourceforge1&refcode1=3Dvs3390 _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel