From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Brownell Date: Wed, 18 Sep 2002 18:08:53 +0000 Subject: Re: Having trouble hooking up a Canon PowerShot S200 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org > Starting hotplug subsystem: usb > ** can't synthesize root hub events > > I'm assuming this is bad. Why would this happen? You don't have the "usbmodules" program installed. It's not necessarily "bad", it just means that the hotplug events that were dropped on the floor while your system was booting ("coldplug" events) couldn't be recovered later. Workaround: unplug your USB devices, then plug them in again. > Whenever I turn my camera on and plug it in, nothing seems > to happen. I see no messages in /var/log/syslog, /var/log/messages, > or dmesg. Sounds like some sort of USB level problem. Are you sure you have the right USB host controller driver loaded? On 2.4 that'd likely be "usb-ohci", "uhci", or "usb-uhci". - Dave ------------------------------------------------------- This SF.NET email is sponsored by: AMD - Your access to the experts on Hammer Technology! Open Source & Linux Developers, register now for the AMD Developer Symposium. Code: EX8664 http://www.developwithamd.com/developerlab _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel