From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bret Comstock Waldow Date: Wed, 25 Dec 2002 21:55:06 +0000 Subject: problems w/hotplug, Debian Woody, and Handspring Visor Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org Hi, I've been using Redhat 7.3 for months, with hotplug, gpilod, and Evolution. Hotsyncing has been quite reliable - put the PDA in the cradle, press the button, it works. I've been trying to switch to Debian Woody (current stable), and haven't been able to get this to work. I've appended from /var/log/messages below, but the line that stands out is: Dec 20 10:50:37 ganesha /etc/hotplug/usb.agent: missing kernel or user mode driver visor lsmod reports the module is indeed loaded at the time. I recompiled the kernel (2.4.18) and the module and receive the same message and result. I press the hotsync button, the sequence shown below occurs in /var/log/messages, and no hotsync occurs. It times out and the Visor errors. Any ideas? Thanks in advance, Bret Here is a section of my /var/log/messages: ==================================== Two attempts to hotsync - and the results from /var/log/messages: Dec 20 10:49:50 ganesha kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 Dec 20 10:49:50 ganesha kernel: usb.c: USB new device connect, assigned device number 3 Dec 20 10:49:50 ganesha kernel: usb.c: USB device 3 (vend/prod 0x82d/0x100) is not claimed by any active driver. Dec 20 10:49:50 ganesha /etc/hotplug/usb.agent: Setup visor for USB product 82d/100/0100 Dec 20 10:49:50 ganesha kernel: usbserial.c: USB Serial support registered for Generic Dec 20 10:49:50 ganesha kernel: usb.c: registered new driver serial Dec 20 10:49:50 ganesha kernel: usbserial.c: v1.0.0:USB Serial Driver core Dec 20 10:49:50 ganesha kernel: usbserial.c: USB Serial support registered for Handspring Visor Dec 20 10:49:50 ganesha kernel: usbserial.c: Handspring Visor converter detected Dec 20 10:49:50 ganesha kernel: visor.c: Handspring Visor: Number of ports: 2 Dec 20 10:49:50 ganesha kernel: visor.c: Handspring Visor: port 1, is for Generic use and is bound to ttyUSB0 Dec 20 10:49:50 ganesha kernel: visor.c: Handspring Visor: port 2, is for HotSync use and is bound to ttyUSB1 Dec 20 10:49:50 ganesha kernel: usbserial.c: Handspring Visor converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Dec 20 10:49:50 ganesha kernel: usbserial.c: Handspring Visor converter now attached to ttyUSB1 (or usb/tts/1 for devfs) Dec 20 10:49:50 ganesha kernel: visor.c: v1.0.0:USB HandSpring Visor driver Dec 20 10:49:50 ganesha /etc/hotplug/usb.agent: missing kernel or user mode driver visor Dec 20 10:49:57 ganesha kernel: usb.c: USB disconnect on device 3 Dec 20 10:49:57 ganesha kernel: usbserial.c: Handspring Visor converter now disconnected from ttyUSB0 Dec 20 10:49:57 ganesha kernel: usbserial.c: Handspring Visor converter now disconnected from ttyUSB1 Dec 20 10:50:37 ganesha kernel: hub.c: USB new device connect on bus1/1, assigned device number 4 Dec 20 10:50:37 ganesha kernel: usb.c: USB new device connect, assigned device number 4 Dec 20 10:50:37 ganesha kernel: usbserial.c: Handspring Visor converter detected Dec 20 10:50:37 ganesha kernel: visor.c: Handspring Visor: Number of ports: 2 Dec 20 10:50:37 ganesha kernel: visor.c: Handspring Visor: port 1, is for Generic use and is bound to ttyUSB0 Dec 20 10:50:37 ganesha kernel: visor.c: Handspring Visor: port 2, is for HotSync use and is bound to ttyUSB1 Dec 20 10:50:37 ganesha kernel: usbserial.c: Handspring Visor converter now attached to ttyUSB0 (or usb/tts/0 for devfs) Dec 20 10:50:37 ganesha kernel: usbserial.c: Handspring Visor converter now attached to ttyUSB1 (or usb/tts/1 for devfs) Dec 20 10:50:37 ganesha /etc/hotplug/usb.agent: Setup visor for USB product 82d/100/0100 Dec 20 10:50:37 ganesha /etc/hotplug/usb.agent: missing kernel or user mode driver visor Dec 20 10:50:42 ganesha kernel: usb.c: USB disconnect on device 4 Dec 20 10:50:42 ganesha kernel: usbserial.c: Handspring Visor converter now disconnected from ttyUSB0 Dec 20 10:50:42 ganesha kernel: usbserial.c: Handspring Visor converter now disconnected from ttyUSB1 ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel