USB not working anymore

USB not working anymore

[Vicky Byford]

Under Mandrake 8.2, I have been syncing with my Zaurus PDA (via usb
link) quite happily until recently. Now the usb port does not seem to be
working. This seems to have coincided with trying to read an SD card via
a Sandisk Cruzer reader via the second usb port. 

Under /var/log/messages file I can see that the kernel installs the
drivers: 

Jan 13 21:31:50 goofy kernel: usb.c: registered new driver usbdevfs 
Jan 13 21:31:50 goofy kernel: usb.c: registered new driver hub 
Jan 13 21:31:50 goofy kernel: usbdnet.c: v0.4b sl@lineo.com,
tbr@lineo.com
Jan 13 21:31:50 goofy kernel: usbdnet.c: USB Host to Device Network -
for 
Linux USB Devices using MDLM/CDC 
Jan 13 21:31:50 goofy kernel: usb.c: registered new driver usbdnet 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: $Revision: 1.275 $ time
06:23:00 
Mar 5 2002 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: High bandwidth mode enabled 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 4 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: Detected 2 ports 
Jan 13 21:31:50 goofy kernel: usb.c: new USB bus registered, assigned
bus 
number 1 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: USBCMD_HCRESET timed out! 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 4 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: Detected 2 ports 
Jan 13 21:31:50 goofy kernel: usb.c: new USB bus registered, assigned
bus 
number 2 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: USBCMD_HCRESET timed out! 
Jan 13 21:31:50 goofy kernel: usb-uhci.c: v1.275:USB Universal Host 
Controller Interface driver 
Jan 13 21:31:01 goofy : Loading module: usbdnet 
Jan 13 21:31:06 goofy usb: Loading USB interface (usb-uhci) succeeded 
Jan 13 21:31:06 goofy usb: Mount USB filesystem succeeded 
Jan 13 21:31:06 goofy /etc/hotplug/usb.agent: ... no modules for USB
product 
0/0/0 
Jan 13 21:31:06 goofy /etc/hotplug/usb.agent: ... no modules for USB
product 
0/0/0 

Before this, I did not get 'USBCMD_HCRESET timed out!' and usb.agent was
able 
to connect to the usbdnet settings in modules.usbmap. I also have an
ifcfg-
usb0 network script that has not changed. 

lsmod shows that the modules are loaded: 

Module Size Used by Tainted: P 
ppp_deflate 42240 0 (autoclean) 
bsd_comp 4544 0 (autoclean) 
ppp_async 6560 1 (autoclean) 
ppp_generic 19880 3 (autoclean) [ppp_deflate bsd_comp ppp_async] 
slhc 5056 0 (autoclean) [ppp_generic] 
sd_mod 11644 0 (autoclean) 
sr_mod 15160 0 (autoclean) (unused) 
emu10k1 57984 0 
parport_pc 22088 1 (autoclean) 
ac97_codec 9568 0 [emu10k1] 
sound 57292 0 [emu10k1] 
lp 6464 0 (autoclean) 
soundcore 4068 7 [emu10k1 sound] 
parport 23968 1 (autoclean) [parport_pc lp] 
af_packet 12488 0 (autoclean) 
ipchains 35816 0 
usb-uhci 21668 0 (unused) 
natsemi 15720 1 (autoclean) 
nls_iso8859-15 3360 2 (autoclean) 
nls_cp850 3584 2 (autoclean) 
vfat 9788 2 (autoclean) 
fat 31384 0 (autoclean) [vfat] 
supermount 56932 4 (autoclean) 
usbdnet 14184 0 (unused) 
usbcore 59072 1 [usb-uhci usbdnet] 
ide-scsi 8032 0 
scsi_mod 92488 3 [sd_mod sr_mod ide-scsi] 
rtc 5912 0 (autoclean) 
ext3 62092 2 
jbd 39356 2 [ext3] 

'ifconfig -a' only shows my network card and loop back (no usb0) 

Anyone have any ideas as to how I can sync again under linux? 

Thanks 
Vicky 





-------------------------------------------------------
This SF.NET email is sponsored by: Take your first step towards giving 
your online business a competitive advantage. Test-drive a Thawte SSL 
certificate - our easy online guide will show you how. Click here to get 
started: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0027en
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel