egate USB support

egate USB support

[Dersim (Sim) Ahmad]

Hi all,
          I'm running a Red Hat Linux 7.2, Kernel 2.4.7-10, i'm a newbie 
at this, and so when i plug in my USB device in is there supposed to be 
somekind of a GUI coming up telling me that it available to be used?, 
'cause i ran some code and i'm not sure if my device is actually working 
or not, if someone could let me know that would be fantastic.[root@asia 
init.d]# ./hotplug status
PCI Status for kernel:  Linux 2.4.7-10 i686

PCI up; bus count is 2
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge 
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge 
(rev 03)
00:0e.0 Multimedia audio controller: Trident Microsystems 4DWave DX (rev 02)
00:0f.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] 
(rev 30)
00:14.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:14.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:14.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:14.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 
[Productiva] AGP (rev 02)


USB Status for kernel:  Linux 2.4.7-10 i686

USB up; bus count is 1
T:  Bus\x01 Lev\0 Prnt\0 Port\0 Cnt\0 Dev#=  1 Spd\x12  MxCh= 2
P:  Vendor\000 ProdID\000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber\x1480
I:  If#= 0 Alt= 0 #EPs= 1 Cls	(hub  ) Sub\0 Prot\0 Driver=hub
T:  Bus\x01 Lev\x01 Prnt\x01 Port\0 Cnt\x01 Dev#=  2 Spd=1.5 MxCh= 0
P:  Vendor	73 ProdID\001 Rev= 1.00
S:  Manufacturer=SchlumbergerSema
S:  Product=SchlumbergerSema Cryptoflex e-gate
I:  If#= 0 Alt= 0 #EPs= 0 Cls\0(>ifc ) Sub\0 Prot\0 Driver=(none)

USB Drivers Loaded:
         usbdevfs
         hub

khubd/hotplug thread:
  F S   UID   PID  PPID  C PRI  NI ADDR    SZ WCHAN  TTY          TIME CMD
040 S     0  3196     1  0  69   0    -     0 end    pts/3    00:00:00 khubd

Module                  Size  Used by
usb-uhci               21536   0  (unused)
usbcore                51712   1  [usb-uhci]
ide-cd                 27072   0  (autoclean)
cdrom                  28512   0  (autoclean) [ide-cd]
trident                26512   0  (autoclean)
ac97_codec              8832   0  (autoclean) [trident]
soundcore               4464   2  (autoclean) [trident]
binfmt_misc             6416   1
autofs                 11520   0  (autoclean) (unused)
3c59x                  26336   1
ipchains               39200   0
ext3                   64624   2
jbd                    40992   2  [ext3]

[root@asia init.d]#

Thanks in advance.

Sim




-------------------------------------------------------
This SF.NET email is sponsored by: A Thawte Code Signing Certificate 
is essential in establishing user confidence by providing assurance of 
authenticity and code integrity. Download our Free Code Signing guide:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0028en
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Re: egate USB support

[Brad Hards]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Thu, 16 Jan 2003 18:18, Dersim (Sim) Ahmad wrote:
> T:  Bus\x01 Lev\x01 Prnt\x01 Port\0 Cnt\x01 Dev#=  2 Spd=1.5 MxCh= 0
> P:  Vendor	73 ProdID\001 Rev= 1.00
> S:  Manufacturer=SchlumbergerSema
> S:  Product=SchlumbergerSema Cryptoflex e-gate
> I:  If#= 0 Alt= 0 #EPs= 0 Cls\0(>ifc ) Sub\0 Prot\0 Driver=(none)
Your device is detected, but you have no driver loaded.
Try the Muscle project for drivers for this type of product:
http://www.linuxnet.com/sourcedrivers.html

Also, you probably want to upgrade from such an obsolete kernel.

Brad
- -- 
http://linux.conf.au. 22-25Jan2003. Perth, Aust. I'm registered. Are you?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE+Jl/JW6pHgIdAuOMRAg7MAJ9DUeP3znk2Sd4D4IRBzeGl6KbIcgCdEZWn
aEPTvkknI9fbrGMhjyopPkw=sZWF
-----END PGP SIGNATURE-----



-------------------------------------------------------
This SF.NET email is sponsored by: A Thawte Code Signing Certificate 
is essential in establishing user confidence by providing assurance of 
authenticity and code integrity. Download our Free Code Signing guide:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0028en
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel