Re: [ANNOUNCE] udev 0.1 release

[Oliver Neukum <oliver@neukum.org>]

> You are talking about the "issue" of /dev/foo going away because that
> device was removed, and then another device added which creates /dev/foo
> just as the user starts to open /dev/foo?  Or something else?

The name is not important. The numbers matter.
A device goes away. It has major:minor x:y. Say it has the name /dev/foo. 
A new device is added and reuses x:y, name /dev/foo2. During the window
while /dev/foo isn't unlinked, you have access to /dev/foo2 with possibly
wrong permissions. It's worse, if you miss a 'remove' event. In that case
you are potentially permanently screwed.

You can avoid that if you never reuse device numbers. But in that case
you'd better think about a 16:48 major:minor split.

> > > > - Error handling. What do you do if the invocation ends in EIO ?
> > >
> > > Which invocation?  From /sbin/hotplug?
> >
> > Yes.
> > This is a serious problem. Your scheme has very nasty failure modes.
> > By implementing this in user space you are introducing additional
> > failure modes.
> > - You need disk access -> EIO
>
> If udev becomes a deamon, disk access isn't needed.  Actually the
> current version of udev doesn't require any disk access, other than
> loading it into memory.

Not true. You might need to swap out memory it uses.

> > - You have no control over memory allocation -> ENOMEM, EIO in swap space
> > Usually I'd not care about EIO, but here security is threatened. EIO
> > crashing the system under some circumstances is inevitable, EIO opening a
> > security hole is not acceptable however.
>
> So yes, doing this in userspace causes a number of these kinds of
> "problems".  The same kinds of "problems" that all other user programs
> have to deal with, right?

They don't and don't have to. Everything else fails securely. If a PAM
module fails, you get no access.

And yes, any scheme that handles device removal in user space has this
problem.

> So, if udev can't be read from the disk, the machine isn't in a very
> workable state, creating that new device node is going to be the least
> of your worries.

Why? You need just a single sector to fail. Murphy will always strike.

> If udev can't get access to memory (actually it does no malloc calls, so
> it would have to run out of stack space), or there is no memory to load
> udev into memory, then again, you have a unstable machine, and there's
> not much else we can do about it.

By this logic you should remove the checks for kmalloc failing.
Running a box into OOM happens. Worse, it can be triggered intentionally.

> > 4000 spawnings is 32MB for kernel stacks alone.
> > You cannot assume that resources will be sufficient for that.
>
> If you have 4000 disks, you have to have a _lot_ of memory just to deal
> with it.  See the other 4000 disk threads for more discussions about
> this issue.
>
> If we fix up the kernel to handle that many different disks, then
> userspace can surely handle 4000 tasks (it can handle that today,
> right?)

Nevertheless, kmalloc can fail and you need to allocate a kernel stack and
page tables to spawn a task. Security must not suffer from that.

> Anyway, it will be quite difficult to plug 4000 disks in "all at once".
> There is a time delay inbetween discovering each of those disks from
> within the kernel, not to mention the physical issues of spinning them
> all up.

Spinning them up? Plug in a cable to a FibreChannel fabric and you get
exactly that situation.

> > That again is a serious problem, because you cannot resync.
> > If you lose a 'remove' event you're screwed.
>
> Yes, if you lose a remove, things can get out of whack.  My goal is to
> not lose any.

How? Or precisely, how can you guarantee it?

	Regards
		Oliver



-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger 
for complex code. Debugging C/C++ programs can leave you feeling lost and 
disoriented. TotalView can help you find your way. Available on major UNIX 
and Linux platforms. Try it free. www.etnus.com
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel