From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joshua Pollak Date: Wed, 30 Apr 2003 18:24:21 +0000 Subject: Hotplug loads USB audio before local audio Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org Hello, I have a built in emu10k1 audio devices in my computer and a USB quickcam with a microphone. It seems the modules for the USB quickcam are loaded via Hotplug before the module for the emu10k1 module is loaded. This is on RedHat 9.0 BTW. When I boot my computer with the Quickcam connected, the usb audio module loads before the emu10k1 module, so the Quickcam gets the /dev/mixer, etc, devices. The sound card gets the /dev/mixer1, etc, devices. When I boot with the camera unplugged, the soundcard is /dev/mixer, etc, and then I can plug in the camera and get them to be /dev/mixer1, etc. Short of hacking the system's boot process up, is there a way to ensure that the emu10k1 sound card will always be connected to the primary /dev/mixer devices, while the USB ones will be on the secondary ones? -- Joshua Pollak 617-491-3474 x586 Software Engineer joshp@cra.com Charles River Analytics ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel