* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
@ 2003-05-06 17:39 ` Pedro Lopez-Cabanillas
2003-05-06 18:30 ` Pedro Lopez-Cabanillas
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Pedro Lopez-Cabanillas @ 2003-05-06 17:39 UTC (permalink / raw)
To: linux-hotplug
On Tuesday 06 May 2003 13:32, Alexander Kühn wrote:
> scorpio:/etc/hotplug # cat usb.usermap
> # usb module match_flags idVendor idProduct bcdDevice_lo
> bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
> bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
> usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
> 0x00 0x00 0x00 0x00 0x00
> 0x00 0x00000000
>
Can you try this?
usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
(match_flags) ^^^^^^
(idVendor) ^^^^^^
(idProduct) ^^^^^^
Regards,
Pedro
--
ALSA Library Bindings for Pascal
http://alsapas.alturl.com
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
2003-05-06 17:39 ` Pedro Lopez-Cabanillas
@ 2003-05-06 18:30 ` Pedro Lopez-Cabanillas
2003-05-06 18:50 ` Alexander Kühn
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Pedro Lopez-Cabanillas @ 2003-05-06 18:30 UTC (permalink / raw)
To: linux-hotplug
On Tuesday 06 May 2003 19:39, Pedro Lopez-Cabanillas wrote:
> On Tuesday 06 May 2003 13:32, Alexander Kühn wrote:
> > scorpio:/etc/hotplug # cat usb.usermap
> > # usb module match_flags idVendor idProduct bcdDevice_lo
> > bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
> > bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
> > usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
> > 0x00 0x00 0x00 0x00 0x00
> > 0x00 0x00000000
>
> Can you try this?
> usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
>
> (match_flags) ^^^^^^
> (idVendor) ^^^^^^
> (idProduct) ^^^^^^
Sorry. Seems that lsusb is not very reliable on ppc architecture (bytesexual
problem :-). Try this instead:
usb-storage 0x0003 0x0d7d 0x0240 0x0000 0x0000
Regards,
Pedro
--
ALSA Library Bindings for Pascal
http://alsapas.alturl.com
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
2003-05-06 17:39 ` Pedro Lopez-Cabanillas
2003-05-06 18:30 ` Pedro Lopez-Cabanillas
@ 2003-05-06 18:50 ` Alexander Kühn
2003-05-07 3:17 ` Randy.Dunlap
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Alexander Kühn @ 2003-05-06 18:50 UTC (permalink / raw)
To: linux-hotplug
Hi Pedro,
I see your idea and tried it, but it wont change something, I just
played around with the usb.agend and modified a bit:
scorpio:/etc/hotplug # diff usb.agent.bak usb.agent
83c83
< # DEBUG=yes export DEBUG
---
> DEBUG=yes export DEBUG
373a374,385
>
> if [ $DEBUG -eq "yes" ]; then
> mesg "usb_idVendor=$usb_idVendor"
> mesg "usb_idProduct=$usb_idProduct"
> mesg "usb_bcdDevice=$usb_bcdDevice"
> mesg "usb_bDeviceClass=$usb_bDeviceClass"
> mesg "usb_bDeviceSubClass=$usb_bDeviceSubClass"
> mesg "usb_bDeviceProtocol=$usb_bDeviceProtocol"
> mesg "usb_bInterfaceClass=$usb_bInterfaceClass"
> mesg "usb_bInterfaceSubClass=$usb_bInterfaceSubClass"
> mesg "usb_bInterfaceProtocol=$usb_bInterfaceProtocol"
> fi
then I copied the values to usb.usermap (konfabulating the values for
bcdDevice_lo and bcdDevice_hi) :
# usb module match_flags idVendor idProduct bcdDevice_lo
bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
usb-storage 0x0003 0x0d7d 0x0240 0x0000
0x0200 0x00 0x00 0x00
0x08 0x06 0x50 0x00000000
now it looks like this:
May 6 20:39:49 scorpio kernel: hub.c: USB new device connect on bus2/1,
assigned device number 19
May 6 20:39:49 scorpio kernel: usb.c: USB device 19 (vend/prod
0xd7d/0x240) is not claimed by any active driver.
May 6 20:39:52 scorpio usb.agent: usb_idVendor453
May 6 20:39:52 scorpio usb.agent: usb_idProductW6
May 6 20:39:52 scorpio usb.agent: usb_bcdDevice%6
May 6 20:39:52 scorpio usb.agent: usb_bDeviceClass=0
May 6 20:39:52 scorpio usb.agent: usb_bDeviceSubClass=0
May 6 20:39:52 scorpio usb.agent: usb_bDeviceProtocol=0
May 6 20:39:52 scorpio usb.agent: usb_bInterfaceClass=8
May 6 20:39:52 scorpio usb.agent: usb_bInterfaceSubClass=6
May 6 20:39:52 scorpio usb.agent: usb_bInterfaceProtocol€
May 6 20:39:53 scorpio usb.agent: Setup usb-storage for USB product
d7d/240/100
now I just have to find the devices..(hopefully)
Thanks for your help,
Alexander.
Pedro Lopez-Cabanillas wrote:
>On Tuesday 06 May 2003 13:32, Alexander Kühn wrote:
>
>
>>scorpio:/etc/hotplug # cat usb.usermap
>># usb module match_flags idVendor idProduct bcdDevice_lo
>>bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
>>bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
>>usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
>> 0x00 0x00 0x00 0x00 0x00
>> 0x00 0x00000000
>>
>>
>>
>
>Can you try this?
>usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
>
>(match_flags) ^^^^^^
>(idVendor) ^^^^^^
>(idProduct) ^^^^^^
>
>Regards,
>Pedro
>
>
>
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (2 preceding siblings ...)
2003-05-06 18:50 ` Alexander Kühn
@ 2003-05-07 3:17 ` Randy.Dunlap
2003-05-07 3:38 ` Randy.Dunlap
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Randy.Dunlap @ 2003-05-07 3:17 UTC (permalink / raw)
To: linux-hotplug
> On Tuesday 06 May 2003 19:39, Pedro Lopez-Cabanillas wrote:
>> On Tuesday 06 May 2003 13:32, Alexander Kühn wrote:
>> > scorpio:/etc/hotplug # cat usb.usermap
>> > # usb module match_flags idVendor idProduct bcdDevice_lo
>> bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
>> > bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
>> usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
>> > 0x00 0x00 0x00 0x00 0x00
>> > 0x00 0x00000000
>>
>> Can you try this?
>> usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
>>
>> (match_flags) ^^^^^^
>> (idVendor) ^^^^^^
>> (idProduct) ^^^^^^
>
> Sorry. Seems that lsusb is not very reliable on ppc architecture (bytesexual
> problem :-). Try this instead:
> usb-storage 0x0003 0x0d7d 0x0240 0x0000 0x0000
Yes, that's right. I made a patch for lsusb-endianness about 3 years
ago, but I expect that it's lost by now...unless it's in one of the
linux-usb email archives.
~Randy
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (3 preceding siblings ...)
2003-05-07 3:17 ` Randy.Dunlap
@ 2003-05-07 3:38 ` Randy.Dunlap
2003-05-07 21:54 ` Pedro Lopez-Cabanillas
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Randy.Dunlap @ 2003-05-07 3:38 UTC (permalink / raw)
To: linux-hotplug
>> On Tuesday 06 May 2003 19:39, Pedro Lopez-Cabanillas wrote:
>>> On Tuesday 06 May 2003 13:32, Alexander Kühn wrote:
>>> > scorpio:/etc/hotplug # cat usb.usermap
>>> > # usb module match_flags idVendor idProduct bcdDevice_lo
>>> bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
>>> > bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
>>> usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
>>> > 0x00 0x00 0x00 0x00 0x00
>>> > 0x00 0x00000000
>>>
>>> Can you try this?
>>> usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
>>>
>>> (match_flags) ^^^^^^
>>> (idVendor) ^^^^^^
>>> (idProduct) ^^^^^^
>>
>> Sorry. Seems that lsusb is not very reliable on ppc architecture
>> (bytesexual
>> problem :-). Try this instead:
>> usb-storage 0x0003 0x0d7d 0x0240 0x0000 0x0000
>
> Yes, that's right. I made a patch for lsusb-endianness about 3 years ago,
> but I expect that it's lost by now...unless it's in one of the linux-usb
> email archives.
Hm, apparently I didn't make a patch, just raised the issue and got no
resolution on it.
Here's the beginning of the mail thread:
http://marc.theaimsgroup.com/?l=linux-usb-devel&m˜056359905969&w=2
~Randy
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (4 preceding siblings ...)
2003-05-07 3:38 ` Randy.Dunlap
@ 2003-05-07 21:54 ` Pedro Lopez-Cabanillas
2003-05-07 22:17 ` Randy.Dunlap
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Pedro Lopez-Cabanillas @ 2003-05-07 21:54 UTC (permalink / raw)
To: linux-hotplug
On Wednesday 07 May 2003 05:38, Randy.Dunlap wrote:
> >> On Tuesday 06 May 2003 19:39, Pedro Lopez-Cabanillas wrote:
> >>> On Tuesday 06 May 2003 13:32, Alexander Kühn wrote:
> >>> > scorpio:/etc/hotplug # cat usb.usermap
> >>> > # usb module match_flags idVendor idProduct bcdDevice_lo
> >>>
> >>> bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
> >>>
> >>> > bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
> >>>
> >>> usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
> >>>
> >>> > 0x00 0x00 0x00 0x00
> >>> > 0x00 0x00 0x00000000
> >>>
> >>> Can you try this?
> >>> usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
> >>>
> >>> (match_flags) ^^^^^^
> >>> (idVendor) ^^^^^^
> >>> (idProduct) ^^^^^^
> >>
> >> Sorry. Seems that lsusb is not very reliable on ppc architecture
> >> (bytesexual
> >> problem :-). Try this instead:
> >> usb-storage 0x0003 0x0d7d 0x0240 0x0000 0x0000
> >
> > Yes, that's right. I made a patch for lsusb-endianness about 3 years
> > ago, but I expect that it's lost by now...unless it's in one of the
> > linux-usb email archives.
>
> Hm, apparently I didn't make a patch, just raised the issue and got no
> resolution on it.
>
> Here's the beginning of the mail thread:
> http://marc.theaimsgroup.com/?l=linux-usb-devel&m˜056359905969&w=2
>
I'm not sure about this (from usbutils-0.11)
lsusb.c:270
vid = buf[8] | (buf[9] << 8);
pid = buf[10] | (buf[11] << 8);
usbmodules.c:413
idVendor = buf[8] | (buf[9] << 8);
idProduct = buf[10] | (buf[11] << 8);
Both programs seem to be affected, if the above is wrong. It seems to say: get
the first byte and store it on the lower half of the 16 bits word, then get
the next byte and store it in the high bits, but what is doing is to store
the second byte followed by the first byte on the word. This is correct in
little-endian machines, but not in big-endian. If i'm right, then the
following should work on both sexes:
idVendor = buf[8] + (buf[9] * 256);
idProduct = buf[10] + (buf[11] * 256);
What do you think?
But anyway, (sorry if my suspicions are wrong) the fact is that lsusb does not
work in ppc, and usbmodules also can be wrong. This is more serious, because
usbmodules is used in hotplug scripts to find what modules to load for USB
devices if it is installed.
Regards,
Pedro
--
ALSA Library Bindings for Pascal
http://alsapas.alturl.com
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (5 preceding siblings ...)
2003-05-07 21:54 ` Pedro Lopez-Cabanillas
@ 2003-05-07 22:17 ` Randy.Dunlap
2003-05-07 22:18 ` Pedro Lopez-Cabanillas
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Randy.Dunlap @ 2003-05-07 22:17 UTC (permalink / raw)
To: linux-hotplug
On Thu, 8 May 2003 00:18:33 +0200 Pedro Lopez-Cabanillas <plcl@telefonica.net> wrote:
| On Thursday 08 May 2003 00:24, David Brownell wrote:
| > >>>>>usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
| > >>>>>
| > >>>>>usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
| >
| > IF the byte order is wrong in "modules.usbmap",
| > that'd be some kind of modutils bug...
|
| Sorry, but the bug was mine. We were talking about how to setup the
| "usb.usermap" file, and my mistake was to use vendor and product ids from
| lsusb directly. Later, i've checked the output from usbview, what is right
| AFAIK.
So there is no problem AFA you know? with lsusb or modutils or usbview?
If so, that's good news.
--
~Randy
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (6 preceding siblings ...)
2003-05-07 22:17 ` Randy.Dunlap
@ 2003-05-07 22:18 ` Pedro Lopez-Cabanillas
2003-05-07 22:24 ` David Brownell
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Pedro Lopez-Cabanillas @ 2003-05-07 22:18 UTC (permalink / raw)
To: linux-hotplug
On Thursday 08 May 2003 00:24, David Brownell wrote:
> >>>>>usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
> >>>>>
> >>>>>usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
>
> IF the byte order is wrong in "modules.usbmap",
> that'd be some kind of modutils bug...
Sorry, but the bug was mine. We were talking about how to setup the
"usb.usermap" file, and my mistake was to use vendor and product ids from
lsusb directly. Later, i've checked the output from usbview, what is right
AFAIK.
Regards,
Pedro
--
ALSA Library Bindings for Pascal
http://alsapas.alturl.com
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (7 preceding siblings ...)
2003-05-07 22:18 ` Pedro Lopez-Cabanillas
@ 2003-05-07 22:24 ` David Brownell
2003-05-07 22:36 ` Pedro Lopez-Cabanillas
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: David Brownell @ 2003-05-07 22:24 UTC (permalink / raw)
To: linux-hotplug
>>>>>usb-storage 0x0000 0x0d7d 0x0240 0x0000 0x0000
>>>>>
>>>>>usb-storage 0x0003 0x7d0d 0x4002 0x0000 0x0000
IF the byte order is wrong in "modules.usbmap",
that'd be some kind of modutils bug...
- Dave
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (8 preceding siblings ...)
2003-05-07 22:24 ` David Brownell
@ 2003-05-07 22:36 ` Pedro Lopez-Cabanillas
2003-05-08 18:48 ` Randy.Dunlap
2003-05-08 19:10 ` Pedro Lopez-Cabanillas
11 siblings, 0 replies; 13+ messages in thread
From: Pedro Lopez-Cabanillas @ 2003-05-07 22:36 UTC (permalink / raw)
To: linux-hotplug
On Thursday 08 May 2003 00:17, Randy.Dunlap wrote:
> On Thu, 8 May 2003 00:18:33 +0200 Pedro Lopez-Cabanillas
<plcl@telefonica.net> wrote:
> | On Thursday 08 May 2003 00:24, David Brownell wrote:
> | > >>>>>usb-storage 0x0000 0x0d7d 0x0240 0x0000
> | > >>>>> 0x0000
> | > >>>>>
> | > >>>>>usb-storage 0x0003 0x7d0d 0x4002 0x0000
> | > >>>>> 0x0000
> | >
> | > IF the byte order is wrong in "modules.usbmap",
> | > that'd be some kind of modutils bug...
> |
> | Sorry, but the bug was mine. We were talking about how to setup the
> | "usb.usermap" file, and my mistake was to use vendor and product ids from
> | lsusb directly. Later, i've checked the output from usbview, what is
> | right AFAIK.
>
> So there is no problem AFA you know? with lsusb or modutils or usbview?
>
> If so, that's good news.
To clarify:
- usbview output is correct AFAIK. It parses "/proc/bus/usb/devices", then
this file is also correct.
- lsusb output is wrong, as stated by the message from Alexander Kühn, and
also from your ancient messages to the linux-usb-devel list. Maybe usbmodules
(from usbutils package) is also wrong.
- I don't know about modutils, i don't have any data to think it can be wrong.
The file "usb.usermap" is not generated by modutils at all. It's a
hand-maintained file.
Regards,
Pedro
--
ALSA Library Bindings for Pascal
http://alsapas.alturl.com
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (9 preceding siblings ...)
2003-05-07 22:36 ` Pedro Lopez-Cabanillas
@ 2003-05-08 18:48 ` Randy.Dunlap
2003-05-08 19:10 ` Pedro Lopez-Cabanillas
11 siblings, 0 replies; 13+ messages in thread
From: Randy.Dunlap @ 2003-05-08 18:48 UTC (permalink / raw)
To: linux-hotplug
On Thu, 8 May 2003 00:36:02 +0200 Pedro Lopez-Cabanillas <plcl@telefonica.net> wrote:
| On Thursday 08 May 2003 00:17, Randy.Dunlap wrote:
| > On Thu, 8 May 2003 00:18:33 +0200 Pedro Lopez-Cabanillas
| <plcl@telefonica.net> wrote:
| > | On Thursday 08 May 2003 00:24, David Brownell wrote:
| > | > >>>>>usb-storage 0x0000 0x0d7d 0x0240 0x0000
| > | > >>>>> 0x0000
| > | > >>>>>
| > | > >>>>>usb-storage 0x0003 0x7d0d 0x4002 0x0000
| > | > >>>>> 0x0000
| > | >
| > | > IF the byte order is wrong in "modules.usbmap",
| > | > that'd be some kind of modutils bug...
| > |
| > | Sorry, but the bug was mine. We were talking about how to setup the
| > | "usb.usermap" file, and my mistake was to use vendor and product ids from
| > | lsusb directly. Later, i've checked the output from usbview, what is
| > | right AFAIK.
| >
| > So there is no problem AFA you know? with lsusb or modutils or usbview?
| >
| > If so, that's good news.
|
| To clarify:
| - usbview output is correct AFAIK. It parses "/proc/bus/usb/devices", then
| this file is also correct.
| - lsusb output is wrong, as stated by the message from Alexander Kühn, and
| also from your ancient messages to the linux-usb-devel list. Maybe usbmodules
| (from usbutils package) is also wrong.
| - I don't know about modutils, i don't have any data to think it can be wrong.
| The file "usb.usermap" is not generated by modutils at all. It's a
| hand-maintained file.
Pedro, do you have access to a PPC/big-endian system?
Or does anyone else out there, who would be willing to debug this
lsusb problem, or at least try some patches?
--
~Randy
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: Vosonic's X-Drive 2030
2003-05-06 11:32 Vosonic's X-Drive 2030 Alexander Kühn
` (10 preceding siblings ...)
2003-05-08 18:48 ` Randy.Dunlap
@ 2003-05-08 19:10 ` Pedro Lopez-Cabanillas
11 siblings, 0 replies; 13+ messages in thread
From: Pedro Lopez-Cabanillas @ 2003-05-08 19:10 UTC (permalink / raw)
To: linux-hotplug
On Thursday 08 May 2003 20:48, Randy.Dunlap wrote:
> Pedro, do you have access to a PPC/big-endian system?
> Or does anyone else out there, who would be willing to debug this
> lsusb problem, or at least try some patches?
No, sorry. I don't have any at hand now. I'm asking to some friends for help
in this matter. I will tell you if something changes in this situation.
Regards,
Pedro
--
ALSA Library Bindings for Pascal
http://alsapas.alturl.com
-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 13+ messages in thread