From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Thu, 26 Jun 2003 19:08:36 +0000 Subject: Re: Question about Hot device Identity Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Thu, Jun 26, 2003 at 03:42:36PM +0800, Guo, Min wrote: > > 4. Point /proc/sys/kernel/hotplug at the location of the udev binary that > is created. so I change /proc/sys/kernel/hotplug 's content to > /root/udev/udev.is this right? Yes, this is one way to do it. Another way is to just put udev at /etc/hotplug.d/default/ calling it udev.hotplug This requires the latest version of the hotplug package to do so. > 5. Set DEVPATH to /sys/devices/pci0/0000:00:0f.2/usb1/1-1/1-1:0/host2/2:0:0:0/scd0 No, set DEVPATH to something that has a "dev" file in it, which is not this. > But what things should happen here? in my machine, there are no > outputs, I think dbg information should be outputed at least. What debug info? :) Did you build udev with debugging enabled? If so, look in the debug log on the box. thanks, greg k-h ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel