* cpqphp and IOAPIC
@ 2003-07-21 22:55 Olivier Cremel
2003-07-22 13:21 ` Greg KH
2003-07-22 14:10 ` Scott Murray
0 siblings, 2 replies; 3+ messages in thread
From: Olivier Cremel @ 2003-07-21 22:55 UTC (permalink / raw)
To: linux-hotplug
It seems that cpqphp only works if the
machine is using PIC mode due to
the way cpqhp_set_irq() invokes the PCI BIOS.
Is it on purpose ? How to use cpqphp
on a machine using IOAPIC (SMP namely) ?
Thanks.
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: cpqphp and IOAPIC
2003-07-21 22:55 cpqphp and IOAPIC Olivier Cremel
@ 2003-07-22 13:21 ` Greg KH
2003-07-22 14:10 ` Scott Murray
1 sibling, 0 replies; 3+ messages in thread
From: Greg KH @ 2003-07-22 13:21 UTC (permalink / raw)
To: linux-hotplug
On Mon, Jul 21, 2003 at 03:55:23PM -0700, Olivier Cremel wrote:
> It seems that cpqphp only works if the
> machine is using PIC mode due to
> the way cpqhp_set_irq() invokes the PCI BIOS.
>
> Is it on purpose ? How to use cpqphp
> on a machine using IOAPIC (SMP namely) ?
Do you have such a machine? What are the errors that happen when you
try to add a new pci card?
I've been curious at times about some of the irq assignment logic in
that driver, as it doesn't seem that some of the more complex conditions
are handled properly, but I haven't seen any failures in testing on the
hardware I have access to.
Oh, and there is a pci hotplug development mailing list, which is
probably much better place for this topic.
thanks,
greg k-h
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: cpqphp and IOAPIC
2003-07-21 22:55 cpqphp and IOAPIC Olivier Cremel
2003-07-22 13:21 ` Greg KH
@ 2003-07-22 14:10 ` Scott Murray
1 sibling, 0 replies; 3+ messages in thread
From: Scott Murray @ 2003-07-22 14:10 UTC (permalink / raw)
To: linux-hotplug
On Tue, 22 Jul 2003, Greg KH wrote:
> On Mon, Jul 21, 2003 at 03:55:23PM -0700, Olivier Cremel wrote:
> > It seems that cpqphp only works if the
> > machine is using PIC mode due to
> > the way cpqhp_set_irq() invokes the PCI BIOS.
> >
> > Is it on purpose ? How to use cpqphp
> > on a machine using IOAPIC (SMP namely) ?
>
> Do you have such a machine? What are the errors that happen when you
> try to add a new pci card?
>
> I've been curious at times about some of the irq assignment logic in
> that driver, as it doesn't seem that some of the more complex conditions
> are handled properly, but I haven't seen any failures in testing on the
> hardware I have access to.
I don't know about cpqhp (it's been a while since I looked at it), but
I've had to do some hacking to get interrupt assignment working with
CompactPCI system master boards that have IO-APICs. I'll probably float
a patch out after OLS.
> Oh, and there is a pci hotplug development mailing list, which is
> probably much better place for this topic.
I'm CC'ing it in this reply. Olivier, please prune linux-hotplug-devel
from your replies.
Scott
PS: Greg, if I see you (or maybe Russell and/or Ivan K.) there, I
wouldn't mind a little discussion on what the strategy should
be for bus renumbering, as a lot of the new CPCI boards I'm
seeing are going to need some form of it.
--
Scott Murray
SOMA Networks, Inc.
Toronto, Ontario
e-mail: scottm@somanetworks.com
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-07-22 14:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-07-21 22:55 cpqphp and IOAPIC Olivier Cremel
2003-07-22 13:21 ` Greg KH
2003-07-22 14:10 ` Scott Murray
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).