From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Tue, 22 Jul 2003 13:21:49 +0000 Subject: Re: cpqphp and IOAPIC Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Mon, Jul 21, 2003 at 03:55:23PM -0700, Olivier Cremel wrote: > It seems that cpqphp only works if the > machine is using PIC mode due to > the way cpqhp_set_irq() invokes the PCI BIOS. > > Is it on purpose ? How to use cpqphp > on a machine using IOAPIC (SMP namely) ? Do you have such a machine? What are the errors that happen when you try to add a new pci card? I've been curious at times about some of the irq assignment logic in that driver, as it doesn't seem that some of the more complex conditions are handled properly, but I haven't seen any failures in testing on the hardware I have access to. Oh, and there is a pci hotplug development mailing list, which is probably much better place for this topic. thanks, greg k-h ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel