From mboxrd@z Thu Jan 1 00:00:00 1970 From: clemens@dwf.com Date: Fri, 17 Oct 2003 17:57:16 +0000 Subject: Re: [ANNOUNCE] udev 003 release Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org The new udev is nice, and it 'works', but Im still having two problems: (1) Although the messages file shows that it is reading my /etc/udev/namedev.config file, the entries are being ignored. Ive tried both: LABEL, BUS="usb", serial="0B0201420527B284", NAME="usb_disk" and LABEL, BUS="usb", vendor="DMI", NAME="usb_disk" and all I get are /udev/ sda, sdb, sdc, sdd, ... as I plug and unplug. (2) This worked in -0.2, but not -0.3: When a device is created in /udev, I now get just /udev/sda . Previously (0.2) I got both sda and sda1 . Needless to say, a mount attempt on /udev/sda1 now fails. [[ and if I tell it NAME="usb_disk" what should I expect for the name of the first partition??? Am I missing something??? -- Reg.Clemens reg@dwf.com ------------------------------------------------------- This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel