From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Mon, 24 Nov 2003 22:14:25 +0000 Subject: Re: udev does not create scsi disk entries during bootup Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Mon, Nov 24, 2003 at 06:18:54PM +0530, Surekha.PC wrote: > > > >The 'tree' function is much nicer for seeing things like this :) > > Is this a utility? Appreciate if you can inform me where to get it. Hm, it should be included in your distro. What are you running? > >> Here sda, sdb are my native scsi disks while sdc, sdd are iSCSI > disks. > > >Why is your iscsi host controller haning off of the legacy bus? Isn't > it connected to a >ethernet device in reality? You should link it to > that. > > iSCSI is a pseudo SCSI HBA, it is registered with Scsi_Host template > just like any native SCSI HBA. Since there isn't any pci bus associated > with it, it appears on legacy bus. But it's attached to a network connection, correct? If so, why not link it to the network device? > >> I am able to manually create the device nodes for iSCSI disks with > >> udev. > >> > >> Making udev work with hotplug is the only issue now :( > > >Don't know why it isn't working for you. Does any other devices work > >with hotplug? What distro are you using? Can you install the hotplug > >rpms instead of using the tarballs? > > I have native scsi disk devices on my system. These are not tested for > hotplugging since it requires to build udev with initrd, which I am yet > to test with. > > I am using Redhat 9.0 with linux-kernel 2.6.0-test5. > > I was not able to install from rpm, rpm on 2.6 kernel has an issue, it > gives following error and fails... That's another issue. Sounds like you aren't running as root to do that. Anyway, try grabbing the version of hotplug from rawhide/fedora that should be a good base to work off of. Other than that, I really have no idea what's going wrong. It doesn't look to be a kernel or udev error, so I'll be of no help :) Good luck, greg k-h ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel