From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wout Mertens <wmertens@cisco.com>
Date: Wed, 10 Dec 2003 19:29:58 +0000
Subject: Re: Working on a usb-storage hotplug script
Message-Id: <marc-linux-hotplug-107108467730680@msgid-missing>
List-Id: <linux-hotplug.vger.kernel.org>
References: <marc-linux-hotplug-107006883203516@msgid-missing>
In-Reply-To: <marc-linux-hotplug-107006883203516@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-hotplug@vger.kernel.org

Yesterday at 17:09, Olaf Hering ponderously produced:

>  On Tue, Dec 09, Wout Mertens wrote:
>
> > Comments?
>
> forget 2.4, work on 2.6. 2.6 will give you a block event if there is
> something of interrest.

Well, you're right. I just created a hotplug script that will automount
all block devices that get attached. I use this behaviour to use a USB
key as a token for connecting to a VNC session from a thin client.

It's way cleaner than the 2.4 version...

Here's the script, comments?

=====================#!/bin/sh
#
# Automount hotplugged block devices, by Wout Mertens.
#
# Linux v2.6 version
# This script is released under version 2 of the GPL.

# To install this, either make it /sbin/hotplug, or, if you have
# linux-hotplug installed, make it /etc/hotplug.d/block/automount.hotplug .
# It needs to be executable. I tested it with busybox's ash.
#
# The devices will be mounted for the console user if applicable.
#
# To work, this needs:
# - v2.6 kernel support:
#   - hotplugging, /proc mounted, /sys mounted
#   - filesystems that will be mounted, like vfat
# - sh, echo, tr, stat or ls, getent or grep passwd,
#   mount, umount, mkdir, rmdir. logger is used if there.
#
# Possible improvements:
# - Create a desktop entry for the device.
# - Call a notifier script when mounting/unmounting. This could create the
#   desktop entry by itself.
# - Mount as supermount if available. This will improve behaviour for
#   synchronous writes and hanging mounts, although umount -lf already
#   does a good job.
# - Detect filesystem on device, so filesystems that don't need a mounting
#   user can skip user detection.

# Debugging
# set -xv
# exec > /tmp/hotplug.$$ 2>&1

PATH="/bin:/sbin:/usr/bin:/usr/sbin"
export PATH

# We only handle block device messages
[ "$1" != "block" ] && exit 0

# Proclaim stuff to the world
mesg () {
	logger -t $0 "$*"
}

# Is path already mounted?
is_path_mounted () {
	while read dev path rest
	do
		if [ "$path" = "$1" ]
		then
			return 0
		fi
	done < /proc/mounts
	return 1
}

# Get mounted path for a device
get_mounted_path () {
	while read dev path rest
	do
		if [ "$dev" = "$1" ]
		then
			echo "$path"
			return 0
		fi
	done < /proc/mounts
	return 1
}

# Wait for a file to appear
wait_for () {
	local count=0
	while [ $count -lt 10 ] && [ ! -e "$1" ]
	do
		sleep 1
	done
	[ $count -eq 10 ] && return 1
	return 0
}

# Remove strange characters from a filename
clean_filename () {
	echo $1 | tr " /?*\"<>" "_______"
}

# Figure out the device to mount
set `echo $DEVPATH | tr / " "`
[ $# -ne 3 ] && exit 0
DEVICE=/dev/$3

if [ "$ACTION" = "remove" ]
then
	# Unmount it
	dir=`get_mounted_path $DEVICE`
	[ -d "$dir" ] || exit 1
	umount -lf "$dir"
	rmdir "$dir"
	exit 1
fi

if [ "$ACTION" = "add" ]
then
	# Mount it

	# Make sure we have support for vfat
	modprobe -q vfat

	wait_for /sys/$1/$2/device/vendor || exit 1

	# Find the name
	PRODUCT=`cat /sys/$1/$2/device/model`
	if [ -z "$PRODUCT" ]
	then
		PRODUCT=generic
	fi
	# Find out where we mount it
	MOUNTPATH=/mnt/usb/`clean_filename "$PRODUCT"`
	if is_path_mounted "$MOUNTPATH"
	then
		count=1
		while is_path_mounted "${MOUNTPATH}_${count}"
		do
			count=$(( $count + 1 ))
		done
		MOUNTPATH="${MOUNTPATH}_${count}"
	fi
	# Make sure it's a directory
	if [ -e "$MOUNTPATH" ]
	then
		if [ ! -d "$MOUNTPATH" ]
		then
			mesg "$MOUNTPATH exists but is not a directory"
			exit 1
		fi
	else
		mkdir -p "$MOUNTPATH"
		if [ $? -ne 0 ]
		then
			mesg "Could not create mountpoint $MOUNTPATH"
			exit 1
		fi
	fi
	# Find out who we are going to mount it as
	CONSOLEUSER=`stat -c%U /dev/console 2>/dev/null`
	if [ -z "$CONSOLEUSER" ]
	then
		set `ls -l /dev/console`
		CONSOLEUSER=$3
	fi
	[ -n "$CONSOLEUSER" ] || CONSOLEUSER=root
	PASSWD=`getent passwd $CONSOLEUSER 2>/dev/null`
	if [ -z "$PASSWD" ]
	then
		PASSWD=`grep "$CONSOLEUSER" /etc/passwd||grep root /etc/passwd`
	fi
	if [ -z "$PASSWD" ]
	then
		mesg "Could not get password entry for $CONSOLEUSER"
		exit 1
	fi
	set `echo $PASSWD | tr : " "`
	if [ $# -lt 4 ]
	then
		mesg "Bad password entry for $CONSOLEUSER"
		exit 1
	fi

	# These options should prevent abuse and make it writeable for the
	# console user.
	MOUNTOPTS="-s -osync,nosuid,umask7,uid=$3,gid=$4"
	mesg Mounting $DEVICE on $MOUNTPATH, options $MOUNTOPTS

	mount $MOUNTOPTS $DEVICE $MOUNTPATH
fi
=====================

-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id78&alloc_id371&op=click
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel