From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Mon, 15 Dec 2003 22:00:12 +0000 Subject: Re: udev - namedev configuration. Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Sun, Dec 14, 2003 at 09:51:55PM -0700, reg@dwf.com wrote: > Ive probably missed something with the rapid evolution of udev, but > Im having a problem with the udev-008 that I just installed. > > I have the configuration line: > > # USB Disk. > LABEL, BUS="usb", vendor="IC25N020", NAME="usb_disk" > > in namedev.config. The disk in question has 4 partitions on it. Odds are you need to make 2 changes: - your device really is not on the "usb" bus, it's on the scsi bus. So you need to change the BUS="usb" to BUS="scsi". We now actually check that value. - you need to change the NAME rule to put the device partition number in the name. This is done with the "%n" modifier. So the rule should probably be: LABEL, BUS="scsi", vendor="IC25N020", NAME="usb_disk%n" Let us know if that works or not. thanks, greg k-h ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78&alloc_id371&op=click _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel