* How usb hotplug works
@ 2001-01-17 10:35 Chmouel Boudjnah
0 siblings, 0 replies; only message in thread
From: Chmouel Boudjnah @ 2001-01-17 10:35 UTC (permalink / raw)
To: linux-hotplug
--=-=-
Hi,
I cannot get works actually hotplug with a simple usb keyboard :
--=-=-T: Bus\x02 Lev\x01 Prnt\x02 Port\0 Cnt\x01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls\0(>ifc ) Sub\0 Prot\0 MxPS= 8 #Cfgs= 1
P: Vendor\x05a4 ProdIDô98 Rev= 1.00
S: Manufacturer=NOVATEK
S: Product=USB Keyboard
C:* #Ifs= 2 Cfg#= 1 Atr† MxPwr\x100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls\x03(HID ) Sub\x01 Prot\x01 Driver=(none)
E: AdÅ(I) Atr\x03(Int.) MxPS= 8 Ivl= 10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls\x03(HID ) Sub\x01 Prot\x02 Driver=(none)
E: AdÇ(I) Atr\x03(Int.) MxPS= 8 Ivl= 10ms
--=-=-
or the lsusb output attached.
It load the keybdev module but i believe is a STATIC_MODULES that get
loaded all the time ?
We (mandrake) currently plan to use usbd which works great and detect
the usbkbd without any problem via :
class 0x03 subclass 0x00 protocol 0x01 prio 2 kmod usbkbd
class 0x03 subclass 0x01 protocol 0x01 prio 2 kmod usbkbd
i have also to setup a :
post-install usbkbd modprobe keybdev
in my /etc/modules.conf
i have not yet looked too much at the how hotplug works, let me know
if it's the normal behavior...
--=-=-Content-Disposition: attachment; filename=keyboard
--=-=-Bus 002 Device 003: ID 05a4:9998 Ortek Technology, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05a4 Ortek Technology, Inc.
idProduct 0x9998
bcdDevice 1.00
iManufacturer 4 NOVATEK
iProduct 54 USB Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 33
bNumDescriptors 1
bDescriptorType 34
wDescriptorLength 63
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 33
bNumDescriptors 1
bDescriptorType 34
wDescriptorLength 31
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 10
Language IDs: 0409
--=-=-
--=-=-
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
--=-=-=--
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-01-17 10:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-01-17 10:35 How usb hotplug works Chmouel Boudjnah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).