From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miles Lane Date: Mon, 22 Jan 2001 21:01:51 +0000 Subject: Re: Can't hotplug two cardbus devices -- a 3c575 ethernet adapter anda Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-hotplug@vger.kernel.org David Brownell wrote: > It should make /etc/hotplug/net.agent invoke "ifup eth0" ... > assuming you have "/sbin/ifup". Are you sure it isn't doing > that? Certainly does for me ... >=20 When I insert my 3c575, I get: Jan 22 12:55:30 agate kernel: cs: cb_alloc(bus 1): vendor 0x10b7, device=20 0x5157 Jan 22 12:55:30 agate kernel: got res[1000:107f] for resource 0 of PCI=20 device 10b7:5157 Jan 22 12:55:30 agate kernel: got res[10800000:1080007f] for resource=20 1 of PCI device 10b7:5157 Jan 22 12:55:30 agate kernel: got res[10800080:108000ff] for resource=20 2 of PCI device 10b7:5157 Jan 22 12:55:30 agate kernel: got res[10400000:1041ffff] for resource=20 6 of PCI device 10b7:5157 Jan 22 12:55:30 agate kernel: PCI: Enabling device 01:00.0 (0000 -> 0003) Jan 22 12:55:30 agate kernel: PCI: No IRQ known for interrupt pin A of=20 device 01:00.0. Jan 22 12:55:30 agate cardmgr[444]: initializing socket 0 Jan 22 12:55:30 agate cardmgr[444]: socket 0: 3Com 3CCFE575B/3CXFE575B=20 Fast EtherLink XL Jan 22 12:55:30 agate /sbin/hotplug: arguments (pci) env=20 (PCI_CLASS 000 PCI_ID=10B7:5157 ACTION=ADd TERM=3Ddumb HOSTTYPE=3Di386=20 PATH=3D/bin:/sbin:/usr/sbin:/usr/bin HOME=3D/ SHELL=3D/bin/bash DEBUG=3Dyes= =20 PCI_SUBSYS_ID=10B7:5B57 OSTYPE=3DLinux PCI_SLOT_NAME=01:00.0 SHLVL=3D1=20 _=3D/usr/bin/env) Jan 22 12:55:30 agate cardmgr[444]: module=20 /lib/modules/2.4.1-pre9/pcmcia/cb_enabler.o not available Jan 22 12:55:30 agate cardmgr[444]: module=20 /lib/modules/2.4.1-pre9/pcmcia/3c575_cb.o not available Jan 22 12:55:31 agate cardmgr[444]: get dev info on socket 0 failed:=20 Resource temporarily unavailable I see no sign of "modprobe 3c59x" occuring. When I run "modprobe 3c59x" by hand, I get: Jan 22 12:59:38 agate kernel: 3c59x.c:LK1.1.12 06 Jan 2000 Donald=20 Becker and others. http://www.scyld.com/network/vortex.html $Revision:=20 1.102.2.46 $ Jan 22 12:59:38 agate kernel: See Documentation/networking/vortex.txt Jan 22 12:59:38 agate kernel: eth0: 3Com PCI 3CCFE575BT Cyclone CardBus=20 at 0x1000, PCI: Setting latency timer of device 01:00.0 to 64 Jan 22 12:59:38 agate kernel: 00:10:4b:7c:9d:9d, IRQ 11 Jan 22 12:59:38 agate kernel: product code 'NV' rev 07.1 date 06-09-98 Jan 22 12:59:38 agate kernel: eth0: CardBus functions mapped=20 10800080->c5a50080 Jan 22 12:59:38 agate kernel: 8K byte-wide RAM 5:3 Rx:Tx split, MII=20 interface. Jan 22 12:59:38 agate kernel: MII transceiver found at address 0,=20 status 782d. Jan 22 12:59:38 agate kernel: Enabling bus-master transmits and=20 whole-frame receives. Jan 22 12:59:38 agate /sbin/hotplug: arguments (net) env=20 (ACTION=3Dregister TERM=3Ddumb HOSTTYPE=3Di386=20 PATH=3D/bin:/sbin:/usr/sbin:/usr/bin HOME=3D/ SHELL=3D/bin/bash DEBUG=3Dyes= =20 INTERFACE=3Deth0 OSTYPE=3DLinux SHLVL=3D1 _=3D/usr/bin/env) Jan 22 12:59:39 agate kernel: eth0: using default media MII And, I see no sign of "ifup eth0" being run. _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel