From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Date: Wed, 31 Jan 2001 22:41:46 +0000 Subject: Re: hotplug-2001_01_23 and kernel 2.4.1 Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org I think there was a patch to the printer driver to fix this, but I don't remember, does anyone on linux-usb-devel or linux-hotplug see this same thing (I don't have a USB printer handy at the moment.) greg k-h On Wed, Jan 31, 2001 at 10:07:22PM +0000, Gordon Lack wrote: > I've just combined these 2. > > Bascially Ok, but one problem... > > I have an Epson Stylus 740 printer on USB. The kernel calls out to > hotplug with a TYPE os 7/1/2 for this (and hence no INTERFACE value). > > So, the scripts set the 3 interface values to 1000 (out of range). > > This doesn't match any of the 3 printer entries in > /lib/modules/2.4.1/modules.usbconf. *Those* entries have Interface > settings of 7/1/1, 7/1/2 and 7/1/3, but no Device settings. > > So it looks to me as though something has swaped the meaning of the > Interface and Device settings between whatever produces the > modules.usbconf files (if this is modutils then I've just upgrade to > 2.4.2) and what your hotplug scripts expect. > > If I swap the two pairs of 3 fields arround in the "while read ..." > line of the usb.agent script then all is Ok. > > > I hope this makes sense and is useful.... > > Thanks.... > Gordon Lack -- greg@(kroah|wirex).com _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel