* We need reference implementations for each driver/bus type.
@ 2001-02-03 23:48 Miles Lane
2001-02-06 3:00 ` David Brownell
0 siblings, 1 reply; 2+ messages in thread
From: Miles Lane @ 2001-02-03 23:48 UTC (permalink / raw)
To: linux-hotplug
There has been a lot of general discussion of things like using
persistent module information verses Distro config scripts verses
built-in driver intelligence when it comes to configuring drivers.
/sbin/hotplug + /etc/hotplug/usb/MODULENAME and persistent module
data are two new and largely unused mechanisms for handling
configuration. Wouldn't it be helpful to get a few reference
drivers implemented along with attendent configuration files
so that driver developers can look at what the benefits and
implementation approaches for these new solutions?
Is anyone working on this?
Miles
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: We need reference implementations for each driver/bus type.
2001-02-03 23:48 We need reference implementations for each driver/bus type Miles Lane
@ 2001-02-06 3:00 ` David Brownell
0 siblings, 0 replies; 2+ messages in thread
From: David Brownell @ 2001-02-06 3:00 UTC (permalink / raw)
To: linux-hotplug
There was a "Visor" HOWTO I saw a while back that showed
how to do it, but I'm not sure of its current state. It may still
be using the pre-2.4.0 "/etc/usb/drivers/visor" scheme. Basically,
you could make sure that when you plugged in your Visor, you
could sync right away. Likewise some "gphoto2" users were
arranging to tweak camera permissions that way.
- Dave
----- Original Message -----
From: "Miles Lane" <miles@megapathdsl.net>
To: <linux-hotplug-devel@lists.sourceforge.net>
Sent: Saturday, February 03, 2001 3:48 PM
Subject: We need reference implementations for each driver/bus type.
> There has been a lot of general discussion of things like using
> persistent module information verses Distro config scripts verses
> built-in driver intelligence when it comes to configuring drivers.
> /sbin/hotplug + /etc/hotplug/usb/MODULENAME and persistent module
> data are two new and largely unused mechanisms for handling
> configuration. Wouldn't it be helpful to get a few reference
> drivers implemented along with attendent configuration files
> so that driver developers can look at what the benefits and
> implementation approaches for these new solutions?
>
> Is anyone working on this?
>
> Miles
>
> _______________________________________________
> Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
> Linux-hotplug-devel@lists.sourceforge.net
> http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-02-06 3:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-02-03 23:48 We need reference implementations for each driver/bus type Miles Lane
2001-02-06 3:00 ` David Brownell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).