* Any ETA on getting the PCI hardware detection event replaying added?
@ 2001-02-03 23:53 Miles Lane
2001-02-05 3:02 ` Any ETA on getting the PCI hardware detection event replaying David Brownell
2001-02-05 22:50 ` David Brownell
0 siblings, 2 replies; 3+ messages in thread
From: Miles Lane @ 2001-02-03 23:53 UTC (permalink / raw)
To: linux-hotplug
Hi,
It seems like concensus has been reached about the general
requirements for handling the detection of PCI/Cardbus devices
which are already plugged in at boot time (this is the problem
where exec_usermodehelper + /sbin/hotplug can't handle device
detection and module insertion early in the boot sequence).
I'm wondering if anyone is currently working on implementing
this.
Miles
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Any ETA on getting the PCI hardware detection event replaying
2001-02-03 23:53 Any ETA on getting the PCI hardware detection event replaying added? Miles Lane
@ 2001-02-05 3:02 ` David Brownell
2001-02-05 22:50 ` David Brownell
1 sibling, 0 replies; 3+ messages in thread
From: David Brownell @ 2001-02-05 3:02 UTC (permalink / raw)
To: linux-hotplug
There's a bit in CVS right now, relying on versions of
Adam Richter's "pcimodules". The USB analogue will
require usbdevfs and "usbmodules" ... that's for the quick
solution using off-the-shelf components.
There's an issue there: how to get the related programs
properly up-to-date. "pcimodules" is a patch to "pciutils"
now (I'd like a change in it, details below), and the
current "usbutils" release is missing the modutils 2.4.2
support patch. I don't see getting rid of the need for
hotplug awareness in such utilities, unless more data shows
up in /proc and it gets easier to parse without C code.
- Dave
p.s. "pcimodules" changes I'd like to see:
- "-s pci_slot_name" ... one function at a time. On
big systems, the current version might touch
hundreds of PCI busses (said LKML recently)
- "--version" ... so scripts can defend against
versions that are old or buggy
- "--if-unbound" (or somesuch) ... don't bother
saying anything if the function has a driver
already. (/proc/bus/pci/devices has that info.)
----- Original Message -----
From: "Miles Lane" <miles@megapathdsl.net>
To: <linux-hotplug-devel@lists.sourceforge.net>
Sent: Saturday, February 03, 2001 3:53 PM
Subject: Any ETA on getting the PCI hardware detection event replaying added?
>
> Hi,
>
> It seems like concensus has been reached about the general
> requirements for handling the detection of PCI/Cardbus devices
> which are already plugged in at boot time (this is the problem
> where exec_usermodehelper + /sbin/hotplug can't handle device
> detection and module insertion early in the boot sequence).
> I'm wondering if anyone is currently working on implementing
> this.
>
> Miles
>
> _______________________________________________
> Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
> Linux-hotplug-devel@lists.sourceforge.net
> http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Any ETA on getting the PCI hardware detection event replaying
2001-02-03 23:53 Any ETA on getting the PCI hardware detection event replaying added? Miles Lane
2001-02-05 3:02 ` Any ETA on getting the PCI hardware detection event replaying David Brownell
@ 2001-02-05 22:50 ` David Brownell
1 sibling, 0 replies; 3+ messages in thread
From: David Brownell @ 2001-02-05 22:50 UTC (permalink / raw)
To: linux-hotplug
[-- Attachment #1: Type: text/plain, Size: 967 bytes --]
> There's a bit in CVS right now, relying on versions of
> Adam Richter's "pcimodules". The USB analogue will
> require usbdevfs and "usbmodules" ... that's for the quick
> solution using off-the-shelf components.
OK now the stuff in CVS is interesting for both USB
and PCI ...
> There's an issue there: how to get the related programs
> properly up-to-date ...
... so I include Adam's "pcimodules" patch, against
"pciutils 2.1.8" (the latest)
... also attached is a patch against "usbutils-0.7" that
merges the two previous patches, updates the manpage
for "usbmodules", and says it's version "0.7hotplug".
Use "configure --prefix /usr" so it installs where the
hotplug utilities will see it, and (a) normal hotplugging
will use "usbmodules" if usbdevfs is available, also
(b) it'll fake USB hotplug events.
I'd expect rough edges; for example, bringing up a
network interface (present at boot time and not
hotplugged) went very slowly, unclear why.
- Dave
[-- Attachment #2: pcimodules-pciutils-2.1.8.diff.gz --]
[-- Type: application/x-gzip, Size: 4489 bytes --]
[-- Attachment #3: usbutils-hotplug.patch --]
[-- Type: application/octet-stream, Size: 15945 bytes --]
diff -u usbutils-0.7/configure usbutils/configure
--- usbutils-0.7/configure Fri Nov 3 08:51:23 2000
+++ usbutils/configure Mon Feb 5 14:01:30 2001
@@ -781,7 +781,7 @@
PACKAGE=usbutils
-VERSION=0.7
+VERSION=0.7hotplug
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
diff -u usbutils-0.7/usbmodules.8 usbutils/usbmodules.8
--- usbutils-0.7/usbmodules.8 Fri Nov 3 07:30:51 2000
+++ usbutils/usbmodules.8 Mon Feb 5 13:59:06 2001
@@ -1,19 +1,24 @@
-.TH usbmodules 8 "03 November 2000" "usbutils-0.6" "Linux USB Utilities"
+.TH usbmodules 8 "05 February 2001" "usbutils-0.7hotplug" "Linux USB Utilities"
.IX usbmodules
.SH NAME
-usbmodules \- List kernel driver modules available for all currently plugged
-in USB devices
+usbmodules \- List kernel driver modules available for a plugged
+in USB device
.SH SYNOPSIS
.B usbmodules
-.RB [ --device /proc/bus/bus/NNN/NNN ]
-.RB [ --check modulename ]
+.RB [ "--device " /proc/bus/bus/NNN/NNN ]
+.RB [ "--check " modulename ]
.RB [ --help ]
+.RB [ "--mapfile " pathname ]
+.RB [ "--version " pathname ]
.SH DESCRIPTION
.B usbmodules
-lists all driver modules for all currently plugged in USB devices.
-.B usbmodules
-should be run at by /sbin/hotplug of /etc/usb/policy, and whenever
-a USB device is "hot plugged" into the system. This can be done by
+lists driver modules that may be
+able to manage interfaces on
+currently plugged in USB devices.
+.B usbmodules
+may be used by /sbin/hotplug or one of its agents (normally
+.IR /etc/hotplug/usb.agent )
+when USB devices are "hot plugged" into the system. This can be done by
the following Bourne shell syntax:
.IP
for module in $(usbmodules --device $DEVICE) ; do
@@ -22,7 +27,11 @@
.IP
done
.PP
-The DEVICE environment variable is passed from the kernel to /sbin/hotplug.
+The DEVICE environment variable is passed from the kernel to /sbin/hotplug
+during USB hotplugging if the kernel was configured using
+.I usbdevfs.
+.B usbmodules
+currently requires usbdevfs to operate.
.PP
When a USB device is removed from the system, the Linux kernel will
decrement a usage count on USB driver module. If this count drops
@@ -33,38 +42,52 @@
.PP
.SH OPTIONS
.TP
-.B --check modulename
+.BI "--check " modulename
Instead of listing the relevant modules, just exit with code 0 (success)
if the given module's exported USB ID patterns matches. Otherwise,
return failure.
.B usbmodules
emits no output either way.
.TP
-.B --device /proc/bus/usb/NNN/NNN
+.BI "--device " /proc/bus/usb/MMM/NNN
Selects which device
.B usbmodules
will examine. The argument is currently mandatory.
.TP
.B --help, -h
Print a help message
-.SH FILES
.TP
+.BI "--mapfile " /etc/hotplug/usb.handmap
+Use the specified file instead of the
+/lib/modules/.../modules.usbmap file
+corresponding to the running kernel.
+.TP
+.B --version
+Identifies the version of
+.I usbutils
+this tool was built with.
.SH FILES
+.TP
.B /lib/modules/<kernel-version>/modules.usbmap
This file is automatically generated by
.B depmod,
-and used by
+versions 2.4.2 and later, and is used by
.B usbmodules
to determine which modules correspond to which USB ID's.
.TP
.B /proc/bus/usb
-An interface to USB bus configuration space provided by the post-2.1.82 Linux
-kernels. Contains per-bus subdirectories with per-card config space files and a
+An optional interface to USB devices provided by Linux kernels with
+versions of the 2.4 USB support. Contains per-bus subdirectories
+with per-device files (offering a usermode driver API as well
+as access to device and configuration descriptors), a
.I devices
-file containing a list of all USB devices.
+file containing a list of all USB devices, and a
+.I drivers
+file listing USB device drivers known to the USB subsystem.
.SH SEE ALSO
-.BR lsusb (8)
+.BR lsusb (8),
+.I http://linux-hotplug.sourceforge.net
.SH AUTHOR
.B usbmodules
@@ -73,6 +96,8 @@
.B
lsusb,
which was written by Thomas Sailer <sailer@ife.ee.ethz.ch>.
+
+.\" Code and documentation updated by David Brownell.
.SH COPYRIGHT
diff -u usbutils-0.7/usbmodules.c usbutils/usbmodules.c
--- usbutils-0.7/usbmodules.c Fri Nov 3 07:30:52 2000
+++ usbutils/usbmodules.c Mon Feb 5 13:04:05 2001
@@ -3,13 +3,17 @@
/*
* usmodules.c -- pcimodules like utility for the USB bus
*
- * Written by primarily by Adam J. Richter. lspci.c is derived from:
- * lsusb.c, written by Thomas Sailer, and pcimodules.c, which is
- * also written by Adam J. Richter. usbmodules.h is derived from
- * linux-2.4.0-test10/include/linux/usb.h (exact authorship unknown,
- * probably Randy Dunlap).
+ * lsusb.c is derived from:
*
- * Copyright (C) 2000 Yggdrasil Computing, Inc.
+ * lspci.c by Thomas Sailer,
+ * pcimodules.c by Adam J. Richter
+ * linux-2.4.0-test10/include/linux/usb.h probably by Randy Dunlap
+ *
+ * The code in usbmodules not derived from elsewhere was written by
+ * Adam J. Richter. David Brownell added the --mapfile and --version
+ * options.
+ *
+ * Copyright (C) 2000, 2001 Yggdrasil Computing, Inc.
* Copyright (C) 1999 Thomas Sailer (sailer@ife.ee.ethz.ch)
*
* This program is free software; you can redistribute it and/or modify
@@ -68,12 +72,14 @@
#define _GNU_SOURCE
#include <getopt.h>
-#define OPT_STRING "c:d:h"
+#define OPT_STRING "c:d:hm:v"
static struct option long_options[] = {
{"check", required_argument, NULL, 'c'},
- {"device", required_argument, NULL, 'd'},
+ {"device", required_argument, NULL, 'd'},
{"help", no_argument, NULL, 'h'},
- { 0, 0, NULL, 0}
+ {"mapfile", required_argument, NULL, 'm'},
+ {"version", no_argument, NULL, 'v'},
+ { 0, 0, NULL, 0}
};
#define MODDIR "/lib/modules"
@@ -92,8 +98,6 @@
static char *checkname = NULL;
-static const char *procbususb = "/proc/bus/usb";
-
static int idVendor;
static int idProduct;
static int bcdDevice;
@@ -109,27 +113,103 @@
fprintf(stderr, "Memory allocation failure.\n");
exit(1);
}
+ return result;
+}
+
+static int
+scan_without_flags(const char *line, struct usbmap_entry *entry, char *name) {
+ unsigned int driver_info;
+ if (sscanf(line,
+ "%s 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x",
+ name,
+ &entry->idVendor,
+ &entry->idProduct,
+ &entry->bcdDevice_lo,
+ &entry->bcdDevice_hi,
+ &entry->bDeviceClass,
+ &entry->bDeviceSubClass,
+ &entry->bDeviceProtocol,
+ &entry->bInterfaceClass,
+ &entry->bInterfaceSubClass,
+ &entry->bInterfaceProtocol,
+ &driver_info) != 12)
+ return 0;
+
+ entry->match_flags = 0;
+
+ /* idVendor==0 is the wildcard for both idVendor and idProduct,
+ because idProduct==0 is a legitimate product ID. */
+ if (entry->idVendor)
+ entry->match_flags |= USB_MATCH_VENDOR | USB_MATCH_PRODUCT;
+
+ if (entry->bcdDevice_lo)
+ entry->match_flags |= USB_MATCH_DEV_LO;
+
+ if (entry->bcdDevice_hi)
+ entry->match_flags |= USB_MATCH_DEV_HI;
+
+ if (entry->bDeviceClass)
+ entry->match_flags |= USB_MATCH_DEV_CLASS;
+
+ if (entry->bDeviceSubClass)
+ entry->match_flags |= USB_MATCH_DEV_SUBCLASS;
+
+ if (entry->bDeviceProtocol)
+ entry->match_flags |= USB_MATCH_DEV_PROTOCOL;
+
+ if (entry->bInterfaceClass)
+ entry->match_flags |= USB_MATCH_INT_CLASS;
+
+ if (entry->bInterfaceSubClass)
+ entry->match_flags |= USB_MATCH_INT_SUBCLASS;
+
+ if (entry->bInterfaceProtocol)
+ entry->match_flags |= USB_MATCH_INT_PROTOCOL;
+
+ return 1;
+}
+
+static int
+scan_with_flags(const char *line, struct usbmap_entry *entry, char *name) {
+ unsigned int driver_info;
+ return (sscanf(line, "%s 0x%x 0x%x "
+ "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x",
+ name,
+ &entry->match_flags,
+ &entry->idVendor,
+ &entry->idProduct,
+ &entry->bcdDevice_lo,
+ &entry->bcdDevice_hi,
+ &entry->bDeviceClass,
+ &entry->bDeviceSubClass,
+ &entry->bDeviceProtocol,
+ &entry->bInterfaceClass,
+ &entry->bInterfaceSubClass,
+ &entry->bInterfaceProtocol,
+ &driver_info) == 13);
}
void
-read_modules_usbmap(void)
+read_modules_usbmap(char *pathname)
{
- struct utsname utsname;
char filename[MAXPATHLEN];
FILE *usbmap_file;
char line[LINELENGTH];
struct usbmap_entry *prev;
struct usbmap_entry *entry;
- unsigned int driver_data;
char name[LINELENGTH];
- if (uname(&utsname) < 0) {
- perror("uname");
- exit(1);
+ if (pathname == NULL) {
+ struct utsname utsname;
+ if (uname(&utsname) < 0) {
+ perror("uname");
+ exit(1);
+ }
+ sprintf(filename, "%s/%s/%s", MODDIR, utsname.release, USBMAP);
+ pathname = filename;
}
- sprintf(filename, "%s/%s/%s", MODDIR, utsname.release, USBMAP);
- if ((usbmap_file = fopen(filename, "r")) == NULL) {
- perror(filename);
+ if ((usbmap_file = fopen(pathname, "r")) == NULL) {
+ perror(pathname);
exit(1);
}
@@ -140,18 +220,8 @@
entry = xmalloc(sizeof(struct usbmap_entry));
- if (sscanf(line, "%s 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x",
- name,
- &entry->idVendor,
- &entry->idProduct,
- &entry->bcdDevice_lo,
- &entry->bcdDevice_hi,
- &entry->bDeviceClass,
- &entry->bDeviceSubClass,
- &entry->bDeviceProtocol,
- &entry->bInterfaceClass,
- &entry->bInterfaceSubClass,
- &entry->bInterfaceProtocol) != 10) {
+ if (!scan_with_flags(line, entry, name) &&
+ !scan_without_flags(line, entry, name)) {
fprintf (stderr,
"modules.usbmap unparsable line: %s.\n", line);
free(entry);
@@ -195,45 +265,44 @@
for (mod = usbmap_list; mod != NULL; mod = mod->next) {
- if (mod->idVendor &&
+ if ((mod->match_flags & USB_MATCH_VENDOR) &&
mod->idVendor != idVendor)
continue;
- if (mod->idProduct &&
+ if ((mod->match_flags & USB_MATCH_PRODUCT) &&
mod->idProduct != idProduct)
continue;
- /* No need to test mod->bcdDevice_lo != 0, since 0 is never
- greater than any unsigned number. */
- if (mod->bcdDevice_lo > bcdDevice)
+ if ((mod->match_flags & USB_MATCH_DEV_LO) &&
+ mod->bcdDevice_lo > bcdDevice)
continue;
- if (mod->bcdDevice_hi &&
+ if ((mod->match_flags & USB_MATCH_DEV_HI) &&
mod->bcdDevice_hi < bcdDevice)
continue;
- if (mod->bDeviceClass &&
+ if ((mod->match_flags & USB_MATCH_DEV_CLASS) &&
mod->bDeviceClass != bDeviceClass)
continue;
- if (mod->bDeviceSubClass &&
- mod->bDeviceSubClass!= bDeviceClass)
+ if ((mod->match_flags & USB_MATCH_DEV_SUBCLASS) &&
+ mod->bDeviceSubClass != bDeviceSubClass)
continue;
- if (mod->bDeviceProtocol &&
+ if ((mod->match_flags & USB_MATCH_DEV_PROTOCOL) &&
mod->bDeviceProtocol != bDeviceProtocol)
continue;
- if (mod->bInterfaceClass
- && mod->bInterfaceClass != bInterfaceClass)
+ if ((mod->match_flags & USB_MATCH_INT_CLASS) &&
+ mod->bInterfaceClass != bInterfaceClass)
continue;
- if (mod->bInterfaceSubClass &&
+ if ((mod->match_flags & USB_MATCH_INT_SUBCLASS) &&
mod->bInterfaceSubClass != bInterfaceSubClass)
continue;
- if (mod->bInterfaceProtocol
- && mod->bInterfaceProtocol != bInterfaceProtocol)
+ if ((mod->match_flags & USB_MATCH_INT_PROTOCOL) &&
+ mod->bInterfaceProtocol != bInterfaceProtocol)
continue;
if (checkname != NULL) {
@@ -286,9 +355,6 @@
{
unsigned char buf[1024], *p;
unsigned int sz;
- int bInterfaceClass;
- int bInterfaceSubClass;
- int bInterfaceProtocol;
if (usb_control_msg(fd, USB_DIR_IN, USB_REQ_GET_DESCRIPTOR,
(USB_DT_CONFIG << 8) | nr,
@@ -327,8 +393,6 @@
static void process_device(const char *path)
{
unsigned char buf[USB_DT_DEVICE_SIZE];
- unsigned int vid, pid;
- char vendor[128], product[128];
int fd;
unsigned int i, maxcfg;
@@ -367,6 +431,7 @@
int opt_index = 0;
int opt;
char *device = NULL;
+ char *pathname = NULL;
while ((opt = getopt_long(argc, argv, OPT_STRING, long_options,
&opt_index)) != -1) {
@@ -378,10 +443,17 @@
device = optarg;
break;
case 'h':
- printf ("Usage: usbmodules [--help] [--device //proc/bus/usb/NNN/NNN] [--check module]\n"
+ printf ("Usage: usbmodules [--help] [--device /proc/bus/usb/NNN/NNN] [--check module]\n"
+ "\t[--mapfile pathname] [--version]\n"
" Lists kernel modules corresponding to USB devices currently plugged\n"
" into the computer.\n");
return 0;
+ case 'm':
+ pathname = optarg;
+ break;
+ case 'v':
+ puts (VERSION);
+ return 0;
default:
fprintf(stderr,
"Unknown argument character \"%c\".\n",
@@ -396,7 +468,7 @@
"\tusbmodules --device /proc/bus/usb/001/009\n");
return 1;
}
- read_modules_usbmap();
+ read_modules_usbmap(pathname);
process_device(device);
if (checkname != NULL)
diff -u usbutils-0.7/usbmodules.h usbutils/usbmodules.h
--- usbutils-0.7/usbmodules.h Fri Nov 3 06:00:32 2000
+++ usbutils/usbmodules.h Mon Feb 5 12:54:16 2001
@@ -1,7 +1,19 @@
/* Declaring the usb_device_id fields as unsigned int simplifies
the sscanf call. */
+#define USB_MATCH_VENDOR 0x0001
+#define USB_MATCH_PRODUCT 0x0002
+#define USB_MATCH_DEV_LO 0x0004
+#define USB_MATCH_DEV_HI 0x0008
+#define USB_MATCH_DEV_CLASS 0x0010
+#define USB_MATCH_DEV_SUBCLASS 0x0020
+#define USB_MATCH_DEV_PROTOCOL 0x0040
+#define USB_MATCH_INT_CLASS 0x0080
+#define USB_MATCH_INT_SUBCLASS 0x0100
+#define USB_MATCH_INT_PROTOCOL 0x0200
+
struct usbmap_entry {
+ unsigned int match_flags;
/*
* vendor/product codes are checked, if vendor is nonzero
* Range is for device revision (bcdDevice), inclusive;
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-02-05 22:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-02-03 23:53 Any ETA on getting the PCI hardware detection event replaying added? Miles Lane
2001-02-05 3:02 ` Any ETA on getting the PCI hardware detection event replaying David Brownell
2001-02-05 22:50 ` David Brownell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).