* Why isn't aic7xxx showing up in the pcimodules list?
@ 2001-02-25 20:13 Miles Lane
2001-02-25 22:18 ` Bill Nottingham
2001-02-26 7:14 ` David Hinds
0 siblings, 2 replies; 3+ messages in thread
From: Miles Lane @ 2001-02-25 20:13 UTC (permalink / raw)
To: linux-hotplug
I have an Adaptec AHA-2930CU in my machine. I boot from
a drive on my AMD-756 IDE interface. I built aic7xxx
support as a module and have all the latest hotplug script
stuff installed, including the patched pcimodules.
pcimodules reports:
emu10k1
3c59x
usb-ohci
And each of these drivers get loaded fine at boot time
by pci.rc.
I am wondering why aic7xxx isn't showing up. Obviously,
the hotplug system isn't setting up the scsi interface
for me.
Miles
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Why isn't aic7xxx showing up in the pcimodules list?
2001-02-25 20:13 Why isn't aic7xxx showing up in the pcimodules list? Miles Lane
@ 2001-02-25 22:18 ` Bill Nottingham
2001-02-26 7:14 ` David Hinds
1 sibling, 0 replies; 3+ messages in thread
From: Bill Nottingham @ 2001-02-25 22:18 UTC (permalink / raw)
To: linux-hotplug
Miles Lane (miles@megapathdsl.net) said:
> I am wondering why aic7xxx isn't showing up. Obviously,
> the hotplug system isn't setting up the scsi interface
> for me.
No MODULE_DEVICE_TABLE in the module.
Bill
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Why isn't aic7xxx showing up in the pcimodules list?
2001-02-25 20:13 Why isn't aic7xxx showing up in the pcimodules list? Miles Lane
2001-02-25 22:18 ` Bill Nottingham
@ 2001-02-26 7:14 ` David Hinds
1 sibling, 0 replies; 3+ messages in thread
From: David Hinds @ 2001-02-26 7:14 UTC (permalink / raw)
To: linux-hotplug
On Sun, Feb 25, 2001 at 05:18:04PM -0500, Bill Nottingham wrote:
> Miles Lane (miles@megapathdsl.net) said:
> > I am wondering why aic7xxx isn't showing up. Obviously,
> > the hotplug system isn't setting up the scsi interface
> > for me.
>
> No MODULE_DEVICE_TABLE in the module.
I believe that the "new" Adaptec-sponsored aic7xxx driver should work
with hotplug. I don't think this is in the 2.4 tree yet.
-- Dave
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-02-26 7:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-02-25 20:13 Why isn't aic7xxx showing up in the pcimodules list? Miles Lane
2001-02-25 22:18 ` Bill Nottingham
2001-02-26 7:14 ` David Hinds
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).