From mboxrd@z Thu Jan 1 00:00:00 1970 From: Erik Mouw Date: Thu, 22 Mar 2001 20:06:36 +0000 Subject: Re: hotplug + pcmcia-cs: how? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org On Thu, Mar 22, 2001 at 02:50:44PM -0500, Jeff Garzik wrote: > Erik Mouw wrote: > > Well the 3Com is a 16 bit card, so I need pcmcia-cs (it doesn't get > > detected without it). > > That sounds like a kernel configuration problem. Double-check that the > following kernel configuration items are set in your kernel's .config: > > CONFIG_PCMCIA=y > CONFIG_CARDBUS=y > # CONFIG_I82365 is not set -- important! > CONFIG_NET_PCMCIA=y > CONFIG_PCMCIA_3C574=m # or =y, your choice Bingo, CONFIG_I82365=y. So how to proceed? Sure, recompile kernel with CONFIG_I82365 not set, but should I also remove pcmcia-cs? Erik -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: J.A.K.Mouw@its.tudelft.nl WWW: http://www-ict.its.tudelft.nl/~erik/ _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel