From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brad Hards Date: Sat, 19 May 2001 10:31:02 +0000 Subject: Re: Hotplug and USB device removal Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org Stephen Williams wrote: > > Stephen Williams wrote: > > Also, as you guessed, I have a program that loads the ez-usb device > > from user mode. > > bhards@bigpond.net.au said: > > Ideally, the loader would be generalized to handle a range of > > different formats (automatically, if possible). > > Well, My loader supports intel hex files that sdcc generates, and it > also sets the permisions and creates a soft link if so requested. I've > abstracted the loader a bit more so that it is easier to add support > for other formats, i.e. S-Records and Adam's hacked format. The Keil toolchain eventually ends up with Intel hex as well. I'd be keen to see this made available, and made to support the firmware format used by Adam. I'm a bit busy at the moment, although I do need a tool for the EZUSB FX2 chipset, so I'll have to find some time. I remember you said that you needed to clean it up first - I'd encourage you to do so. It'd be good to somehow harmonise on a single tool for all these ezusb firmware applications. Brad _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel