From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Brownell Date: Sat, 19 May 2001 15:57:29 +0000 Subject: Re: Hotplug and USB device removal Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-hotplug@vger.kernel.org > However, I would also like to use the hotplug system to notice the > removal of the device and *remove* my symbolic link. The scripts > currently do not support USB remove. It looks like the kernel sends > all the necessary messages, but the script just needs updating. Is > anyone working on this? Not unless you're volunteering ... :) > Also, as you guessed, I have a program that loads the ez-usb device > from user mode. It won't be much effort for me to polish up and > make it available to the world (especially since it supports sdcc > output) as a generic ez-usb loader, but there must be millions of > them out there:-) Well, I think that one which handles both the FX and FX2, and which is generically integrated with the USB hotplugging, would be far more interesting than the other millions-less-one ! (The FX2 download procedure seems to be the same as for the FX, but the register used to control reset after downloading firmware has a different address.) - Dave _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel