From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marvin Stodolsky Date: Fri, 29 Jun 2001 15:06:26 +0000 Subject: 3C562D/3C563D OK, but 3CCFE575BT failure MIME-Version: 1 Content-Type: multipart/mixed; boundary="------------AACCDEC6A6844334157CABCE" Message-Id: List-Id: To: linux-hotplug@vger.kernel.org This is a multi-part message in MIME format. --------------AACCDEC6A6844334157CABCE Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit The Attached text file relates successful usage of a 3Com Corporation", "3C562D/3C563D", "EtherLink III PCMCIA card, whereas the is a failure of: 3Com PCI 3CCFE575BT Cyclone CardBus in the same PCMCIA socket. My current hotplug support is: Package: hotplug Version: 0.0.20010424-2 Priority: optional Section: admin Maintainer: Fumitoshi UKAI Depends: modutils (>= 2.4.2), debconf (>= 0.2.26) Recommends: ifupdown, usbutils, pciutils, bsdutils This is under Debian Linux with a custom 2.4.5 kernel on a Compaq Armada 1500c laptop. While it might be fun to work this out myself, my discretionary Linux service time is throughly used as one of the maintainers of the Lucent chip Winmodem drivers. So assistance in bringing the 3CCFE575BT into service would be appreciated. Under a 2.4.3 and earliers kernel with the old style PCMCIA support, the card has served well. Please reply to me directly, as I don't have time to track an additional list. MarvS --------------AACCDEC6A6844334157CABCE Content-Type: text/plain; charset=us-ascii; name="ethercards.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="ethercards.txt" # cardctl ident 1 product info: "3Com Corporation", "3C562D/3C563D", "EtherLink III", "LAN+Modem PC Card" manfid: 0x0101, 0x0562 function: 6 (network) # /etc/init.d/pcmcia start PCIC=yenta_socket Starting PCMCIA services: modulesJun 29 08:31:03 koala kernel: Linux PCMCIA Card Services 3.1.22 Jun 29 08:31:03 koala kernel: options: [pci] [cardbus] [pm] Jun 29 08:31:04 koala kernel: PCI: Found IRQ 11 for device 00:11.0 Jun 29 08:31:04 koala kernel: PCI: The same IRQ used for device 00:11.1 Jun 29 08:31:04 koala kernel: PCI: Found IRQ 11 for device 00:11.1 Jun 29 08:31:04 koala kernel: PCI: The same IRQ used for device 00:11.0 Jun 29 08:31:04 koala kernel: Yenta IRQ list 06d8, PCI irq11 Jun 29 08:31:04 koala kernel: Socket status: 30000006 Jun 29 08:31:04 koala kernel: Yenta IRQ list 06d8, PCI irq11 Jun 29 08:31:04 koala kernel: Socket status: 30000010 cardmgr. koala:~/knl/240# Jun 29 08:31:04 koala cardmgr[1363]: starting, version is 3.1.25 Jun 29 08:31:04 koala cardmgr[1363]: watching 2 sockets Jun 29 08:31:04 koala cardmgr[1363]: Card Services release does not match Jun 29 08:31:04 koala kernel: cs: IO port probe 0x0c00-0x0cff: clean. Jun 29 08:31:04 koala kernel: cs: IO port probe 0x0800-0x08ff: clean. Jun 29 08:31:04 koala kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x250-0x257 0x260-0x267 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x3ff 0x4d0-0x4d7 Jun 29 08:31:04 koala kernel: cs: IO port probe 0x0a00-0x0aff: clean. Jun 29 08:31:04 koala cardmgr[1363]: initializing socket 1 Jun 29 08:31:04 koala kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jun 29 08:31:04 koala cardmgr[1363]: socket 1: 3Com 3c562/3c563 Ethernet/Modem Jun 29 08:31:05 koala cardmgr[1363]: executing: 'modprobe 3c589_cs' Jun 29 08:31:05 koala cardmgr[1363]: executing: 'modprobe serial_cs' Jun 29 08:31:05 koala kernel: isapnp: Scanning for PnP cards... Jun 29 08:31:05 koala kernel: isapnp: No Plug & Play device found Jun 29 08:31:05 koala kernel: Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled Jun 29 08:31:05 koala kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Jun 29 08:31:06 koala cardmgr[1363]: executing: './network start eth0' Jun 29 08:31:06 koala kernel: eth0: 3Com 3c562, io 0x300, irq 3, hw_addr 00:60:97:F8:8B:52Jun 29 08:31:06 koala kernel: 8K FIFO split 5:3 Rx:Tx, auto xcvr Jun 29 08:31:06 koala kernel: ttyS01 at port 0x02f8 (irq = 3) is a 16550A Jun 29 08:31:06 koala cardmgr[1363]: executing: './serial start ttyS1' Jun 29 08:31:07 koala kernel: eth0: flipped to 10baseT # lsmod Module Size Used by serial_cs 4576 0 (unused) serial 43280 0 [serial_cs] isa-pnp 27888 0 [serial] 3c589_cs 7760 1 ds 6560 2 [serial_cs 3c589_cs] yenta_socket 8688 2 pcmcia_core 39360 0 [serial_cs 3c589_cs ds yenta_socket] 3c59x 23968 0 rtc 5376 0 (autoclean) # ifconfig eth0 Link encap:Ethernet HWaddr 00:60:97:F8:8B:52 inet addr:192.73.213.72 Bcast:192.73.213.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1537 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:587705 (573.9 Kb) TX bytes:0 (0.0 b) Interrupt:3 Base address:0x300 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:78 errors:0 dropped:0 overruns:0 frame:0 TX packets:78 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4972 (4.8 Kb) TX bytes:4972 (4.8 Kb) koala:~/knl/240# ping corel.com PING corel.com (206.47.20.65): 56 data bytes 64 bytes from 206.47.20.65: icmp_seq=0 ttl=47 time=147.7 ms 64 bytes from 206.47.20.65: icmp_seq=1 ttl=47 time=145.9 ms --- corel.com ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 145.9/146.8/147.7 ms ============= Rebooting with 3Com PCI 3CCFE575BT Cyclone CardBus in the PCMCIA socket, dmesg reports: Linux PCMCIA Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 00:11.0 PCI: The same IRQ used for device 00:11.1 PCI: Found IRQ 11 for device 00:11.1 PCI: The same IRQ used for device 00:11.0 Yenta IRQ list 0698, PCI irq11 Socket status: 30000006 Yenta IRQ list 0698, PCI irq11 Socket status: 30000020 cs: cb_alloc(bus 2): vendor 0x10b7, device 0x5157 got res[1c00:1c7f] for resource 0 of PCI device 10b7:5157 got res[10c00000:10c0007f] for resource 1 of PCI device 10b7:5157 got res[10c00080:10c000ff] for resource 2 of PCI device 10b7:5157 got res[10800000:1081ffff] for resource 6 of PCI device 10b7:5157 PCI: Enabling device 02:00.0 (0000 -> 0003) cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x250-0x257 0x260-0x267 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. 3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt eth0: 3Com PCI 3CCFE575BT Cyclone CardBus at 0x1c00, PCI: Setting latency timer of device 02:00.0 to 64 00:10:4b:f8:71:22, IRQ 11 product code 4e56 rev 07.1 date 01-17-99 eth0: CardBus functions mapped 10c00080->c4832080 8K byte-wide RAM 5:3 Rx:Tx split, MII interface. MII transceiver found at address 0, status 782d. Enabling bus-master transmits and whole-frame receives. eth0: scatter/gather enabled. h/w checksums enabled # lsmod Module Size Used by 3c59x 23968 1 ds 6560 2 yenta_socket 8688 2 pcmcia_core 39360 0 [ds yenta_socket] rtc 5376 0 (autoclean) There is only one beep from the card and: ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:65 errors:0 dropped:0 overruns:0 frame:0 TX packets:65 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4384 (4.2 Kb) TX bytes:4384 (4.2 Kb) koala:~/knl/240# ifconfig eth0 up koala:~/knl/240# Jun 29 08:50:51 koala kernel: eth0: using default media MII koala:~/knl/240# ifconfig eth0 Link encap:Ethernet HWaddr 00:10:4B:F8:71:22 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:13184 (12.8 Kb) TX bytes:0 (0.0 b) Interrupt:11 Base address:0x1c00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:65 errors:0 dropped:0 overruns:0 frame:0 TX packets:65 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4384 (4.2 Kb) TX bytes:4384 (4.2 Kb) koala:~/knl/240# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 127.0.0.0 * 255.0.0.0 U 0 0 0 lo Thus with this card, the eth0 is not being established. Any suggestions? What is the significance of : eth0: using default media MII MarvS --------------AACCDEC6A6844334157CABCE-- _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel